Click to view product
Dimension: L 200 x H 6.5 x W 5.7 cm Purotouch® ‎ Skip to the end of the images gallery
Click to view product
C351 Indirect Lighting Profile
Available in two lengths. 119cm or 59cm
T5 Tube 28 Watts, Warm White (2700K) 119cm L
T5 Tube 14 Watts, Warm White (2700K) 59cm L
Dimension: Length: 119cm
Timeless cornice moulding that combines easily with a variety of decorating styles.
.png)
.png)
Available in flexible
.png)
Dimension: L 200 x H 6.9 x W 7.1 cm
Dimension: Dimensions: DX157-2300 x H6.6 x W1.3cm
Flexible version of the C211. This stately crenellated cornice moulding gives any interior a little extra something. Thanks to its Flex technology, curved walls and surfaces are no problem. Be sure to consider the C422 as well or combine with the C305 for even more magnificence. Installation remark: It is necessary to screw this profile on the wall. Flex Radius: R min = 250 cm
Flexible Installation Guide
Dimension: L 200 x H 11.6 x W 11.2 cm Flex ‎
Click to view product
The W111 BAR is the straightforward addition to ZIGZAG, VALLEY and HILL profiles. Designed to fit perfectly with CX190 and SX194 it offers endless possibilities and fast finishing. Cover wall sections from top to bottom to add give an immediate wow effect to any room or use.
.png)
.png){kind=small}
Dimension: L 200 x H 25 x W 2 cm
Max column height 2380mm; Shaft diameter 300mm; Capital width 450mm; base dia 430mm (see below for individual column components). Use with FDP700 if installed externally and finish with suitable exterior grade paint. Column K3202, Base K2132, Capital K3142. Our external range of products are manufactured and designed to be maintenance free for decades to come.
As they can be more complicated to order please call us to discuss any installation issues or questions you may have on 02 9660 2177.
Due to the nature of these products, additional carriage charges will apply.
Dimension: 300mm shaft diameter
Installation Guide
Dimension: Hmax = 2.705 / Hmin = 2.34m
Click to view product
A small, plain, concentric ceiling centre - Click image to enlarge. Matches with R08, R09, R40, R66 and R76 ceiling roses.
Dimension: L 26 x H 3 x W 26 cm Purotouch® ‎
Click to view product
F10 flush mounted ceiling dome (max dia 895mm, drop from ceiling 630mm). Move over image for larger picture. Match with P8050 dado rail and SX156 skirting board.
Dimension: Max dia 895mm
Square decorative ceiling ornament. For use as a wall or ceiling tile.
Dimension: L 59.5 x H 4.3 x W 59.5 cm Purotouch® ‎
This quarter-round is a rounded profile that can be used to finish off the bottom of baseboard, especially when the floors are not even (to hide a gap). This base cap is shock- and waterproof thanks to its high-density polymer blend.
Dimension: 200 (L) x 2 (H) x 2 (W) cm
Can also be used for a nice finish at the bottom of a skirting board.Panel moulding with a linear pattern that works well in both classic and modern interiors.
.png)
Dimension: L 200 x H 7.9 x W 1.6 cm
Decorative shop counter or display, for any retail front.
Stacked panel counter create a textured finish P9040, P8030, P8040, P8020, P5020.
Dimension: 2m (L) x 55mm (H) x 25mm (P)
Matching corner element for P2020 and P21 (below)
Dimension: 200mm(L) x200mm(H) x25mm(P)
Decorative corbel B401 (click image for larger picture and dimensions). Install with Decofix Pro adhesive (from our Accessories section).
Dimension: 11.5cm (w) x 15.5cm (h) x 7cm (d)
Click to view product
The top of the range powered workshop - This British, multi-award winning design, is centred around an armoured, innovative case with a unique and patented POWERhandle system. The POWERhandle design incorporates lithium ion batteries, variable trigger and handle into one unit allowing the tools to pack into the worlds smallest 4 piece combo kit. Combined with the armoured case this portable tool kit becomes a full 8 function table workshop! See further product images below.
Armoured Case with Stainless Steel Work Surface contains:
2 x 18v 2.6Ah Li-Ion POWERhandles
Circular Table Saw
Jigsaw with Quick Release multi-blade chuck
Hammer DrillDriver
Halogen Light
Stainless Steel Post/Fence With Drill Press return spring
Lift out canvas Bag
Fast Charger Dock which quickly charges Li-Ion, NiMh and NICD POWERhandles. Includes SCP (Secondary Charger Point) and LCD display
Metal Protractor
Work Clamp
Drill & driver bit set, plus jisaw blade set
Dimension: 52cm (L) x 35cm (h) x 25cm (w) Weight 16kg
New gallows bracket for 2009 - 400 x 490 x 70mm
Dimension: 400 x 490 x 70mm
Add the touch of warmth and beauty to any fireplace with ORAC DECOR® Mantel Pieces. Primed and ready for painting, these Mantel Pieces will transform ordinary, unembellished Fireplaces and Hearths. See here for further dimensions/fitting guidelines Match with P8050 dado rail, R09 ceiling rose and SX118 skirting board.
This range has been developed to be installed as part of the wall, giving a fully coordinated finish to both the wall and floor and becoming an integral element of the design.
The base of the system is built into the wall structure, being fitted with the plaster and plasterboard (drywall) for a flush finish.
The decorative finishing profile then fixes to the base, creating a seamless effect.
The interlocking finishing profile can be adjusted up to 5 mm in height to allow for slight undulations in the floor.
Illustrated scale dimension 1:1
Dimension: Available in 55 and 60mm heights 2.9 & 4 metre lengths
FIXING ADHESIVE FOR POROUS SURFACES 310mls (7.5m)
Slow drying, strong, installation adhesive and filler for porous surfaces.
Water based, so easy to wipe off excess. One cartridge sufficient for approx 6-7m coving/skirting. Fits in standard caulking gun (FDP100). NOTE: if fitting coving to new lime based plastered walls/ceilings, we recommend using FDP700 Hydro silicon adhesive below. For joins, use Extrafix FX210/FX200.
When installing in cold weather, ensure operating/room temperature >10 celcius for good adhesion.
Installation Brochure
Dimension: 310ml Cartridge
Variomatic professional coving/cornice mitre box. For precise cutting to half degree accuracy. Includes carry case, saw, angle finder & other accessories.
For professionals, available for hire $25.00/day, plus bond and freight charges.
UV Stabilised, no painting required. White. Minimum order 8 pieces. Comes pre-packed in boxes of 8 x 1220mm lengths.
Dimension: Projection: 78mm Height: 172mm Width: 1220mm
External cornice 2440mm x 200 x 160mm - use FDP700 silicon adhesive. Internal and External corners available for this profile (see below)
Dimension: 2.44m(L) x 160mm(H) x 200mm(P)
TF01 - one of our most popular dentil designs. Best used on soffit features at a high level. Install singly or in pairs.
Dimension: projection: 350mm height: 123mm width: 77mm
Click to view product
A very practical and attractive Porch top with plenty of detail making this a beautiful addition to any home. The Roof is available in brown or grey. The Tongue & Groove front and soffit is white. Please call for further details. Features: * Tile effect finish * Tongue & Groove * Atrractive tile edge * Choice of tile colour * Insulated * Easy to fit
Dimension: projection: 1100mm depth: 1780mm width: 750mm
White GRP Finial. (Note: this is a 'flat' back design, only suitable for mounting for front and side view)
Dimension: Projection/depth: 28mm height: 900mm width: 70mm
Pilaster capital K221 (fits with shaft K220).
Dimension: Height 220mm; width 340mm; projection 95mm
Dimension: L 55 x H 1.7 x W 55 cm
Click to view product
Timeless cornice moulding that combines easily with a variety of decorating styles.
.png)
.png)
.jpg)
Dimension: L 200 x H 6.9 x W 7.1 cm
Decorative element - use as an individual design on D101 / D102 or fit between the D1010 (above)
Centrepiece for DS1 - Seasons Plaque
Allow 8-12 weeks, freight not included please request a quote.
Dimension: W 35 x H 61.7 cm
Multi - purpose skirting / architrave/ cornice, contemporary styling. Match with panel moulding PX 164, PX 147 and cornice CX161
Imact, insect and water resistant, great for bathrooms and wet areas.
100% Recyclable
Dimension: 230 x 4 x 1 cm
SHADE Up-lighting trough (part of the Ulf Moritz collection) - also used as an architrave in attached photo (click on thumbnail)
See here for technical details and installation instructions
Indirect Lighting Brochure
PDF C371 Also available in .dwg or .dfx files please call 
02 9700 7222
Dimension: 2m x 18.5 x 6cm
Click to view product
.png)
Art Hanging System - For an innovative twist combine this cornice with ultra contemporary Decor Rail. The Deco Rail system provides a functional way of draping curtains and hanging pictures invisibly supported from behind the cornice. No longer will hanging frames damage your walls, suitable for loads from 4 - 20kg.
Use Quick Links to the Accessories Menu to order adhesives.
Dimension: L2000 x H345 x W9.4mm
Stacked cornicing combination using cornices C322, C332 and C333
A small but elegant profile - Orac Decor coving C322 (min radius for flexible version 1.2m). Match with C215, C240, C260 coving, P8030 dado rail and SX105, SX118 skirting board.
Use Quick Links to the Accessories Menu to order adhesives.
Dimension: 2m (L) x 50mm (H) x 40mm (P)
Please email us to schedule a booking.
You will receive: a certificate; a van sticker; a mitre box; a show case with samples;a luxury picture book; catalogues and brochures.
.gif)
Cleanly curved, generous profile which creates a lovely interplay of light and shadow. Use our indirect lighting profiles to provide your space with an instant upgrade. Designed by Jacques Vergracht. Installation remark: It is necessary to screw this profile on the wall.
.png)
.png)
Dimension: L 200 x H 7.4 x W 17.3 cm Purotouch® ‎
Click to view product
RADIUS - The versatile Radius is one of Ulf Moritz's favourites, simply because it is so simple and distinguished. Powerful enough to stand alone, but also offers endless possibilities used in combination.
Create a wall feature/skirting with all the Radius profiles on top of one another? - see attached image
Dimension: 2m x 12.5 x 3cm
Click to view product
A modern, stylised ceiling rose to fit with the rest of this collection.
Dimension: 60cm (dia)
.png)
.jpg)
Dimension: L 200 x H 8.8 x W 12.2 cm
Click to view product
.png)
.png)
.jpg)
Dimension: 2m (L) x 115mm (H) x 110mm (P)
Click to view product
Dimension: Fabric 150cm (W) Printed Fabric 138cm (W) x Im (L)
Click to view product
- 35mm ceramic disc cartridge can be adjusted to reduce water temperature and flow control settings, saving energy
- Solid brass construction for longevity
- Solid easy to grip modular handle
- Twin stud mounting for secure basin installation
- Stainless steel flexile hoses - 1/2 BSP female
- Suitable for mains pressure istallation
Dimension: View Product Specifications
Click to view product
Set Pilaster Doric.
| K241 Capital | 16.5 x 7.5 x 40 cm |
| K240 Pilaster | 200 x 3 x 29 cm |
| K254 Base | 53 x 7 x 39 cm |
| Height | 269.5cm |
Simple Doric pilaster capital.
Large paneled pilaster shaft.
Wide doric pedestal for pilasters.
Dimension: Height 269.5 cm
Click to view product
Segmented Half Column K4001-3 segments.
| K4131 Capital | 21.5 x 24 x 48.5 - Ø 48.5 cm |
| K4001 Column (3 Segments) | 216 x 17 x 34.5 - Ø 34.5 cm |
| K4121 Base | 40.5 x 23.5 x 46.5 - Ø 46.5 cm |
| Height | 278 cm |
Dimension: Height 278 cm
Click to view product
.jpg)
- Product Information
- Specifications
- Technical Data
- AS/NZS ISO 9001:2008 Certification
- Green Tag Certification
Please call 02 9700 7222 to place your order.
Minimum Delivery Fee up to 30 sheets $79.00+gst over 30 sheets add .80c / m2
Dimension: 1200 x 2400 x 10mm
Click to view product
Autoire Essence
Autoire is for those who dare to make a statement. Rooted in classical architecture, this style reinterprets depth and proportion with bold panelling, structured layering and rhythmic compositions. Instead of simply decorating the walls, Autoire turns them into architectural elements. Create a space that feels both timeless and strinkingly modern.
Dimension: L200 x H10.3 x W15.6cm
.png)
.png)
.png)
Hooks and Hanging AccessoriesInstallation Guide
WATCH INSTALLATION VIDEO
Dimension: L2500 x W33 x H26mm - 20Kg / Meter
Click to view product
.jpg)
- Product Information
- Specifications
- Technical Data
- AS/NZS ISO 9001:2008 Certification
- Green Tag Certification
Please call 02 9700 7222 to place your order.
Minimum Delivery Fee up to 30 sheets $79.00+gst over 30 sheets add .80c / m2 or collect.
Dimension: 1200 x 2400 x 10mm
Click to view product
Long corner block to use at the bottom of the door frame (foot). Door frames are usually discrete ornaments but they act much like picture frames to surround a view.
Dimension: L 9.5 x H 24.9 x W 3.1 cm
Contact the artist, Sam Rey. Embroidered chair with mosaic legs.
Commissions accepted POA
Beautifully detailed ornate design in gold gilt, match with gilt cornices and corbels, also available in white.
Lightweight synthetic materials easily installed using adhesives.
Dimension: 28 cm diameter
Photo identification, car registration and credit card details required, conditions apply www.archiprofiles.com.au/terms.php
Dimension: Daily charge
Click to view product
See more flexible skirting profiles...
Dimension: L 200 x H 10.8 x W 1.3 cm
Click to view product
Skirting BA 400A*
Innovative skiring in metal designed to satisfy the minimalist taste in design, where the skirting performs its function while integrating in the interior design discretely and effectively.- sharp angles
- squared cross section
- height reduced to 4cm
The profile is equipped with a hollow on the invisible side which serves to glue it. The profile is equipped with joints and special pieces with the same minimalist visual effect.
.jpg)
| H=cm | Profile Code | Finish |
| 4cm | BA 400 ASN | Aluminium Silver |
| 4cm | BA 400 ASS | Anodised Aluminium Brushed |
| 4cm | BA 400 ASB | Bright Polished Aluminium Chrome |
| 4cm | BA 400 A 60/50 | Powder Coated Aluminium Colours Corten & Micaceous Grey |
| H=cm | Profile Code |
| 4cm | BA 400 ASN |
| 4cm | end-caps BAC 400 ASN |
This anodised aluminium profile has a silver coating. Good tolerance to oxidation and to mechangical impacts.
Universal external corner, internal corner and end cap.
Material: Extruded anodised aluminium
Length: 2 metres
Height: 4cm
Colours: Silver
| H=cm | Profile Code |
| 4cm | BA 400 ASS |
| 4cm | end-caps BAC 400 ASS |
| H=cm | Profile Code |
| 4cm | BA 400 ASB |
| 4cm | end-caps BAC 400 ASB |
The surface of this anodised aluminium profile has been chrome effect treated in order to give that sparkling effect. It holds the same properties as the other aluminium models. Universal external corner, internal corner and end cap.
Material: Extruded powder coated aluminium
Length: 2 metres
Height: 4cm
Colours: Chrome
| H=cm | Profile Code |
| 4cm | BA 400 A 60/50 |
| 4cm | end-caps BA60/50C 400 A 60/50 |
Powder coated aluminium laquered with a 60 microns polyester powder base varnish paint. Universal external corner, internal corner and end-cap.
Material: Extruded powder coated aluminium
Length: 2 metres
Height: 4cm
Colours: Corten & Micaceous Grey
.jpg)
Skirting BA 400 ASN Silver Anodised Aluminium
This anodised aluminium profile has a silver coating. Good tolerance to oxidation and to mechanical impacts. Universal external corner, internal corner and end cap.
Dimension: 200cm L x 4cm H
Click to view product
| H=cm | Finish | Profile Code |
| 10cm | White/Grey Insert | WB 100 P11/22 |
| 10cm | White/Pure White Insert | WB 100 P11/11 |
| 10cm | Grey/Grey Insert | WB 100 P22/22 |
Synthetic resin skirtig co-extruded to offer a dual-colour effect if required. Resistant to impact damage and most diluted chemicals and detergents.
Material: Resintop
Colours: other colours availabe on request, minimum order 1000 metres colour chart
Length: 2.7 metres
Height: 10cm
Click to view product
| H=cm | Finish | Profile Code |
| 10cm | White/Grey Insert | WB 100 P11/22 |
| 10cm | White/Pure White Insert | WB 100 P11/11 |
| 10cm | Grey/Grey Insert | WB 100 P22/22 |
Synthetic resin skirtig co-extruded to offer a dual-colour effect if required. Resistant to impact damage and most diluted chemicals and detergents.
Material: Resintop
Colours: other colours availabe on request, minimum order 1000 metres colour chart
Length: 2.7 metres
Height: 10cm
Dimension: 2.7 metres L x 10cm H
Click to view product
Skirting BA 600 A Powder Coated Skirting
Metal or PVC wall skirting boards to fix either with glue, screws or nails. It is easy to install for an elegant and lasting finish. The profile contoured ends and give a snug fit on the wall covering over the bottom perimeter along the dilation gap joint, thus ensuring the necessary expansion movement to the floor.
.jpg)
.jpg)
| H=cm | Profile Code | Profile Code |
| 6cm | Powder Coated Colour Micaceous Grey | BA 600 A 50 |
| 6cm | Powder Coated Colour Corten | BA 600 A 60 |
Powder coated aluminium laquered with a 60 microns polyester powder base varnish paint. Universal external corner, internal corner and end-cap.
Material: Extruded powder coated aluminium
Length: 2 metres
Height: 6cm
Colours: Corten & Micaceous Grey
.jpg)
Also available in BA 600 ASN Silver Anodised Aluminium and BA 600 Aluminium texture
Dimension: 2.7 metres L x 4cm H
Click to view product
Richly curved door surrond featuring an enlarged rear end, allowing a perfect connection with even the highest panel mouldings, such as P4020. Part of the Heritage Family.
Heritage Collection Brochure
Drawing File
Dimension: 230 x 11.9 x 3.2 cm
Anodised aluminium profile PS130 is a negative jolly provides a minimalist effect with the option of joining to the floor with the skirting board series or as a decorative ceiling gap.
Plasterboard is the preferred material of the modern construction industry for both residential and commercial buildings. The new and unique anodised aluminium profile PS 130, has been designed to work with plasterboard installations as both a finishing and decorative element for an added value.
This new profile is ideal for use with this type of substrate both as a negative jolly providing a modern minimalist effect with the option of joining it to the floor with the skirting board series PLANO DESIGN BF or as a decorative ceiling gap, in line with the latest design trends.
The visible section of 13mm x 13mm perfectly fits with the most popular plasterboard thickness.
.jpg)
.
| H=cm | Finish | Profile Code |
| 1.3cm | Silver Anodised Aluminium | PS120 AS |
.jpg)
The visible section of PS130 is 13mm x 13mm
Dimension: 38mm x 13mm x 13mm
Click to view product
SX118 PDF
Skirting Installation
Flexible Installation
Dimension: 200 x 13.8 x 1.8 cm
Click to view product
Dimension: L200 x H11.6 x W11.2cm
Click to view product
Heritage
.png)
Dimension: L200 x H8.8 x W12.2
Click to view product
.jpg)
Large rosette with pattern of stylised acanthus leaves. Installation remark: It is necessary to screw this profile on the wall.
Dimension: L 75 x H 4.5 x W 75 cm Purotouch® ‎
Our largest ceiling rose. A statement ornament ideal for larger spaces. Can be used to hide cables.
Dimension: L 95.2 x H 4.8 x W 95.2 cm Purotouch® ‎
Large rosette with classic carving. Installation remark: It is necessary to screw this profile on the walls.
Dimension: L 79 x H 6 x W 79 cm Purotouch® ‎
Square panel moulding for the embellishment of doors and wall.
.png)
.jpg)
Dimension: L 55 x H 1.7 x W 55 cm Duropolymer® ‎
Data Sheet
jfjfjdkdk
Dimension: 75mm H x 2000mm L
Click to view product
.png)
Dimension: L 230 x H 9.2 x W 2.2 cm
Click to view product
Rombus is part of the 3D Wall Panels collection. Release your creativity and design a unique work of art that is a perfect fit for you and your interior. Play around with various shapes and use fun colour accents as a finishing touch. To cover 1 square meter you need 38 pieces.
Dimension: L 15 x H 2.9 x W 25.8 cm
Dimension: L 200 x H 4.9 x W 2.4 cm Purotouch® ‎
Classic Cotswold model with linear design. This bestseller can be mounted in two ways, fixing the flat section to either the wall or the ceiling.
Also available in flexible material.
Dimension: Dimensions: 200 x 9.9 x 5cm
The Easy Renovation Solution
-
Water resistant skirting board
-
Ideal for humid and wet areas
-
Impact resistant material
-
Pre-primed for painting
-
Contemporary minimalist profile
Internal Cavity Dimensions
Dimension: Dimensions: 200 x 10 x 2.2cm
Click to view product
.png)
ICT 3 Way Join 
ICI Internal Join
ICE External JoinClick to view product
.png)
Dimension: L 200 x H 11.6 x W 4.8 cm
C357 Indirect Lighting Profile
.jpg)
Available in two lengths. 119cm or 59cm
T5 Tube 28 Watts, Warm White (2700K) 119cm L
T5 Tube 14 Watts, Warm White (2700K) 59cm L
Dimension: Length: 59cm
Match with DX162-2300 architrave, skirting SX118, cornice CX126
100% recyclable.
Imact and water resistant, great for bathrooms and wet areas.
Use Quick Links to the Accessories Menu to order adhesives. Use only DecoHydro for fixing in wet areas with DecoFix Extra for joining.
Dimension: L: 200cm x H: 18cm x W: 1cm
Flexible version of the C213. This Canterbury model is perfectly symmetrical. Thanks to its Flex technology, curved walls and surfaces are no problem. The larger C217F version has also been a bestseller for years now. Installation remark: It is necessary to screw this profile on the wall. Flex Radius: R min = 280 cm
Flexible Installation Guide
Dimension: L 200 x H 8 x W 8 cm Flex ‎
Click to view product
Flexible Installation Guide
Dimension: L 200 x H 1.6 x W 1.6 cm Flex ‎
Click to view product
Max column height 2755mm; Shaft diameter 300mm; Capital width 450mm; base dia 455mm (see below for individual column components). Use with FDP700 if installed externally and finish with suitable exterior grade paint. Column K3202, Base K3152, Capital K3142. Our external range of products are manufactured and designed to be maintenance free for decades to come.
As they can be more complicated to order please call us to discuss any installation issues or questions you may have on 02 9660 2177.
Due to the nature of these products, additional carriage charges will apply.
Dimension: 300mm shaft diameter
High square socle pedestal for half columns.
Dimension: 57 x 17.5 x 35 - � 35 cm
.png)
Dimension: L 14.96 x H 1.65 x W 14.96 in Purotouch® ‎
Click to view product
Classic panel moulding with gentle curlicues. Can also be used for a nice finish at the bottom of a skirting board.
.png)
Also available in a larger size...
.png)
Dimension: L 200 x H 2.5 x W 1.2 cm
Dimension: L 24.5 x H 2.4 x W 24.5 cm Purotouch® ‎
.png)
Beautifeel North Sydney.
This gorgeous combination of colour and light creates the perfect ambience to relax and shop surrounded with style.
The lighting centrepiece is trimmed with Orac Decor Flex C215F. Orac Luxxus C322 and Axxent CX123 cornice mouldings frame the room and the display areas are a combination of panel mouldings CX123, PX144 and PX102.
Dimension: 2m (L) x 50mm (H) x 40mm (P)
Special Order - Price on Application
Dimension: 2.44m(L) x 160mm(H) x 200mm(P)
Decorative element (match with P101/A)
Special delivery.
Dimension: 65mm(L) x65mm (H) x10mm (P)
Decorative corbel B402 (click image for larger picture and dimensions). Install with Decofix Pro (from our Accessories section).
Dimension: 9cm (w) x 22cm (h) x 7cm (d)
Click to view product
Raised panel. Accentuates a flat door, or plain wall area underneath a dado / chair rail. Match with D500, D503, D506 and D507 raised panels and F30, F31 ceiling/wall tiles.
Dimension: L 55 x H 1.7 x W 22 cm Duropolymer® ‎
Joint section to fit between M9010L and M9010R
Dimension: 11.5cm x 8.5cm x 4.5cm
Add the touch of warmth and beauty to any fireplace with ORAC DECOR® Mantel Pieces. Primed and ready for painting, these Mantel Pieces are certain to transform ordinary, unembellished Fireplaces and Hearths. See here for dimensions and fitting guidelines. Match with P9010, P8050 dado rail, R09 ceiling rose and SX118 skirting board.
Dimension: L 55 x H 1.7 x W 22 cm
Click to view product
FIXING ADHESIVE FOR SEALED OR WET SURFACES (7.5m)
External grade (silicon based) mounting adhesive. Use for all products installed in humid areas (shower/wet rooms or outside applications). 290ml cartridge - covers approx 6-7m coving. Fits in standard caulking gun (FDP100). Also use when interior ceilings have been recently plastered using a lime base.
Installation Brochure
Dimension: 290ml Cartridge
Specialist mitre box for coving and skirting. With adjustable, fastening stops to securely hold product in correct place whilst cutting. Max cornice size125mm x 155mm (please call us if unsure whether suitable). See user guidelines here
Dimension: 15.5 x 0 x 12.5
External cornice, maintenance free, stock item. 2m x 65 x 55mm. Install with FDP700 silicon adhesive (see accessories)
Dimension: 2m (L) x 65mm (H) x 55mm (P)
UV Stabilised, no painting required. White. Minimum order 8 pieces. Comes pre-packed in boxes of 8 x 1220mm lengths.
Dimension: Projection: 78mm Height: 172mm Width: 1220mm
A small, subtle dentil pattern, particularly effective on Georgian/Edwardian era properties. Install using FDP700.
Dimension: projection : 105mm height : 120mm width : 75mm
Click to view product
A popular mono-pitched over-door canopy with an authentic Rosemary tiled roof with Shiplap effect edge. Please call for further details. Features * Rosemary tiled roof * Shiplap effect edge * Choice of tile colour * Variable sizes available * Leg brackets * Easy to fit
Dimension: projection: 720mm depth: 1480mm width: 600mm
White GRP Finial - as above (MS-11) but height of 1600mm
Dimension: Projection/depth: 28mm height: 1600mm width: 70mm
Dimension: L 230 x H 9.4 x W 2.3 cm
Click to view product
This elegant cornice moulding creates a subtle transition from wall to ceiling. This bestseller fits a variety of interiors.
.png)
.png)
.jpg)
Dimension: L 200 x H 11.8 x W 11.7 cm
Click to view product
SKIRTING BIM 800 ASN- BASE
The base, available only in silver finish, is conceived to match both the aluminium and micaceous TOPS. Available junctions and end plugs in synthetic resin Silver colour.
Material: Extruded anodised aluminium
Colour: Silver
Lengths: 2 and 4 metres
BASE height: 50 mm
Complete skirting height: 80 mm
Dimension: 50mm (H) x 2 and 4 m Lengths
Centrepiece for DS1
Allow 8-12 weeks delivery, freight not included request a quote.
Dimension: W 15.85 x H 61.7 cm
Includes C213 Cornice (2m length) and Décor Rail (2m length) Orac Decor C213 - a very popular linear pattern (Min radius for flexible version 1.8m). Matches with C217, C240 coving, P8020 or P8030 dado rail and SX118, SX156 skirting board.
For an innovative twist combine this cornice with ultra contemporary Deco Rail. The Deco Rail system provides a functional way of draping curtains and hanging pictures invisibly supported from behind the cornice. No longer will hanging frames damage your walls, suitable for loads from 4 - 20kg.
.png)
Dimension: L200 x H3.45 x W0.94cm
Triple cornicing creates top level indirect lighting. Cornice C322 in combination with C332, C333 and C217.
Orac Decor coving C217 - Our most popular cornice profile - can be installed horizontally or vertically. (Flexible version min radius 3.4m). See example of application here. Matches with C213, C333 coving, P8020 or P8030 dado rail and SX118, SX156 skirting board.
Use Quick Links to the Accessories Menu to order adhesives.
Dimension: 2m (L) x 155mm (H) x 105mm (P) OR 105mm (H) x 155mm (P)
Indirect lighting is great as mood lighting. This profile provides an unexpected floating effect thanks to the delicate shadow line. Designed by Jacques Vergracht. Installation remark: It is necessary to screw this profile on the wall.
Dimension: L 200 x H 7.6 x W 17.1 cm ‎
Click to view product
GOLF - Ulf Moritz's thoughts must have been at sea when he was designing this double rippled Golf. Whether it is used as a cornice moulding, skirting, or as decorative ceiling border, it will certainly deliver a remarkable outline.
Combined on the wall horizontally or vertically, the effect is like a sculpture – a work of art that bursts with movement, light and shadow
Dimension: 2m x 37 x 7.5cm
Click to view product
265 gsm (9 oz) high quality, medium weight natural linen.
Width is 150 cm (59 inches). Ideal for embroidery, housewares, upholstery and clothing.
Dimension: 150 cm (W)
Click to view product
- 35mm ceramic disc cartridge can be adjusted to reduce water temperature and flow control settings, saving energy
- Solid brass construction for longevity
- Solid easy to grip modular handle
- Twin stud mounting for secure basin installation
- Stainless steel flexile hoses - 1/2 BSP female
- Suitable for mains pressure installation
Dimension: View Product Specifications
Click to view product
Set Pilaster Tuscan.
| K221 Capital | 17 x 7.5 x 30.5 cm |
| K220 Pilaster | 200 x 2 x 19.5 cm |
| K255 Base | 54 x 4 x 24.5 cm |
| Height | 271 cm |
Low pilaster crown.
Fluted pilaster shaft. Pilasters provide a sense of style and stateliness to a room. For instance, English Georgian-style houses often include pilasters as trim around the doors.
Tuscan pilaster foot.
Dimension: Height 271 cm
Click to view product
Segmented Half Column K4001-4 segments.
| K4131 Capital | 21.5 x 24 x 48.5 - Ø 48.5 cm |
| K4001 Segment x 4 | 288 x 17 x 34.5 - Ø 34.5 cm |
| K4121 Base | 40.5 x 23.5 x 46.5 - Ø 46.5 cm |
| Height | 350 cm |
Dimension: Height 350cm
Click to view product
This fine shadow line 'Flat delivers an unexpected floating effect. The compact LEDs are easy to install, have a long life and are also maintenance, environment and energy-friendly.
FAQ
See here for technical details and installation instructions
Indirect Lighting Brochure
PDF C352 Also available in .dwg or .dfx files please call 02 9700 7222
Dimension: 200 x 17 x 7.5 cm
Click to view product
- Product Information
- Specifications
- Technical Data
- AS/NZS ISO 9001:2008 Certification
- Green Tag Certification
Please call 02 9700 7222
02 9700 7222 to place your order.Minimum Delivery Fee up to 30 sheets $79.00+gst over 30 sheets add .80c / m2 or collect.
Dimension: 1200 x 2400 x 13mm
Click to view product
Long corner block to use at the bottom of the door frame (foot). Door frames are usually discrete ornaments but they act much like picture frames to surround a view.
Dimension: L24.8 x H27 x W2.7
Beautiful and decadent, match with gold or gilt cornices, cornice also available in white. Synthetic, light-weight easily installed with adhesives.
Dimension: 28 cm diameter
Photo identification, car registration and credit card details required, conditions apply www.archiprofiles.com.au/terms.php
Dimension: Daily charge
Click to view product
K1142 + K1002 + K1152
To make a column shorter or longer it is always better to start with the base (the foot) of the column. Columns can't be used to bear constructions but they are ideal to wrap constructive elements. Please check the the minimal inside width of the columns.
Please note columns, capitals and bases are made to order in Belgium, allow 8-10 weeks delivery for manufacture and sea freight.
Installation Guide.
Dimension: Hmax/min = 2.245m
Click to view product
Flexible version of the SX157. Our simplest cornice moulding is part of the SQUARE family. Thanks to its Flex technology, curved walls and surfaces are no problem. Installation remark: It is necessary to screw this profile on the wall. Flex Radius: R min = 35 cm, R* min = 260 cm
(1).png)
Also available in two other sizes.
(4).png)
SX162F (5).png)
SX163F
Installation of Flexible Profiles
See more flexible skirting profiles....
Dimension: L 200 x H 6.6 x W 1.3 cm
This new profile is ideal for use with this type of substrate both as a negative jolly providing a modern minimalist effect with the option of joining it to the floor with the skirting board series PLANO DESIGN BF or as a decorative ceiling gap, in line with the latest design trends. The visible section of 13mm x 13mm perfectly fits with the most popular plasterboard thickness.
| H=cm | Finish | Profile Code |
| 1.3cm | Silver Anodised Aluminium | PS120 AS |
Dimension: 13mm (H) x 1M
Click to view product
Wall Protection WP 125 P * strips in solid coloured sythetic resin
Synthetic resin wall protection strip, through-coloured to hide the effects of wear and damage. The smooth surface makes it easy to clean and more hygienic than traditional skirtings.
Available in colours and a range of dual-coloured options, th WP wall protection strip can be coordinated with the other profiles in the wall protection range - corner protectors (WA) and skirting (WB).
Together with an aestheti value the dual-coloured effect with a darker colour i the central part improveds its resistance to trolleys and stretchers passage.
.jpg)
H=cm
Finish
Product Code
12.5cm
White / Grey Insert
WP 125 P11/22
12.5cm
White / Pure White Insert
WP 125 P11/11
12.5cm
Grey / Grey Insert
WP 125 P22/22
Synthetic wall protection strips manufactured with two different types of material allowing to get a dual-coloured effect if required. Resistant to impact damage and most diluted chemicals and detergents.
Material: Resintop
Colours: other colours on request
Length: 2.7 metres ( 4.00 metres available on request minimum order 1000 metres).
Width: 12.5cm
Dimension: 2.7 metres L x 8cm H
Skirting BI700 Powder Coated Alumium
| H=cm | Finish | Product Code |
| 7cm | Powder Coated Aluminium RAL colour reference | BI 700 |
| 10cm | Powder Coated Aluminium RAL colour reference | BI 1000 |
| Supports | BIS 20 ANF |
This skiring board is also available powder coated with RAL colour reference and anodised silver aluminium. Relevant pre-drilled interlock-pieces (2 pcs per meter) to be purchased separately, code BIS 20 ANF. Available junctions and endplugs in synthetic resin Silver colour.
.jpg)
Material: Extruded Anodised Aluminium
Colour: RAL colour reference
Length: 2.00 metres
End-caps, internal and external junctions in synthetic resin with the same Silver colour, to make proper and neat junctions. Available in 7cm height.
Materal: Polypropylene
Colour: RAL colour reference
Height: 7cm
Dimension: 2.70 metres L x (7cm H) & (10cm H)
Click to view product
Second in line in the HERITAGE family. A stately classic cornice moulding inspired by the rich heritage of English country homes. Installation remark: It is necessary to screw this profile on the wall.
.png)
Cornice Installation Guide
Browse our Catalogue
Duropolymer Data Sheet - our products are waterproof for indoor and exterior use
PDF C342
For more information call (09) 9097858 / 02108066077
Available in other sizes ..
.png)
.png)
Dimension: L 200 x H 14 x W 19 cm
A classical wall panel with soft curves that re-create the grandeur of the past to your walls. Works well with C336.
Use panel mouldings to create wall frames or wainscoting. These can evoke the atmosphere of stately homes, and tastefully protect your walls. They are equally suitable for both modern and classical homes, and can bring texture to any wall.
Exists in Flex. Flex profiles are really versatile and the finish is far superior to anything one could ever achieve with timber. Especially with design being pushed to its limits these days; rounded lines, circles and curves galore, you will install those flex to your walls and ceilings without any effort at all!
P8050 PDF
Installation Catalogue
Flexible Installation
Dimension: 200 x 12 x 3 cm
Click to view product
This profile can be used as a skirting LED for either upward or downward illumination.
Brochure
Dimension: 23.4cm (W) x 37.1cm (H)
.png)
Water based, so easy to wipe off excess. One cartridge sufficient for approx 6-7m coving/skirting. Fits in standard caulking gun (FDP100). NOTE: if fitting coving to new lime based plastered walls/ceilings, we recommend using FDP700 Hydro silicon adhesive below. For joins, use Extrafix FX210/FX200.
Dimension: FIXING ADHESIVE FOR POROUS SURFACES 310mls
Click to view product
FIXING ADHESIVE FOR POROUS SURFACES 310mls (7.5m)
Slow drying, strong, installation adhesive and filler for porous surfaces.
Water based, so easy to wipe off excess. One cartridge sufficient for approx 6-7m coving/skirting. Fits in standard caulking gun (FDP100). NOTE: if fitting coving to new lime based plastered walls/ceilings, we recommend using FDP700 Hydro silicon adhesive below. For joins, use Extrafix FX210/FX200.
When installing in cold weather, ensure operating/room temperature >10 celcius for good adhesion.
Installation Brochure
Dimension: 310ml Cartridge
Dimension: 310ml Cartridge
Click to view product
DecoFix Pro (310ml cartridge)
FIXING ADHESIVE FOR POROUS SURFACES 310mls (7.5m)
Slow drying, strong, installation adhesive and filler for porous surfaces.
Water based, so easy to wipe off excess. One cartridge sufficient for approx 6-7m coving/skirting. Fits in standard caulking gun (FDP100). NOTE: if fitting coving to new lime based plastered walls/ceilings, we recommend using FDP700 Hydro silicon adhesive below. For joins, use Extrafix FX210/FX200.
When installing in cold weather, ensure operating/room temperature >10 celcius for good adhesion.
Installation Brochure
Dimension: 310ml Cartridge
Dimension: (310ml cartridge)
Click to view product
SHADOWLINE DRYWALL
Hooks and Hanging AccessoriesInstallation Guide
WATCH INSTALLATION VIDEO
Dimension: L2500 x W48 x H10/13mm - 20Kg / Meter
Click to view product
.png)
The W111 BAR is the straightforward addition to ZIGZAG, VALLEY and HILL profiles. Designed to fit perfectly with CX190 and SX194 it offers endless possibilities and fast finishing. Cover wall sections from top to bottom to add give an immediate wow effect to any room or use.
.jpg)
Dimension: L 200 x H 25 x W 2 cm
Dimension: L 105 x H 24.5 x W 3.2 cm
Click to view product
Dimension: L 33.3 x H 2.5 x W 33.3 cm
Click to view product
his, the largest Canterbury model, is stately and symmetrical, with the same linear design above and below. This model is often combined with C338A or B cornice mouldings and the P3020(A) panel moulding.
.jpg)
.png)
Dimension: Dimensions: 200 x 18.2 x 18.2cm
The Easy Renovation Solution
Refreshing your interior? Orac Decor cover skirting boards offer a simple way to upgrade existing skirting without removing it. Designed to neatly fit over old trims, they provide a sleek, durable finish ideal for New Zealand renovations.
-
✔ Fits over existing skirting boards
-
✔ Strong, durable Duropolymer® profiles
-
✔ Pre-primed and ready for finishing
-
✔ Moisture resistant for varied NZ climates
-
✔ Easy install with DecoFix adhesive system
-
✔ Clean, professional architectural result
Internal Cavity Dimensions
Dimension: Dimensions: L200 x H12 x W2.5cm Click to Englarge
Click to view product
Click to view product
Dimension: L 200 x H 11.6 x W 11.2 cm Purotouch® ‎
.png)
This elegant cornice moulding creates a subtle transition from wall to ceiling. This bestseller fits a variety of interiors.
Dimension: L 200 x H 11.8 x W 11.7 cm
This elegant cornice moulding creates a subtle transition from wall to ceiling.
Dimension: L 200 x H 11.8 x W 11.7 cm
This flat cornice moulding which extends along the ceiling provides a floating effect thanks to the recessed shadow line. Designed by Jacques Vergracht.
Dimension: L 200 x H 3 x W 16.5 cm
Flexible version of the C215. Linear, symmetrical profile. This classic cornice moulding is completely at home in any interior. Thanks to its Flex technology, curved walls and surfaces are no problem. Installation remark: It is necessary to screw this profile on the wall. Flex Radius: R min = 160 cm
Flexible Installation Guide
Dimension: L 200 x H 4.7 x W 4.7 cm Flex ‎
Max column height 2245mm; Shaft diameter 220mm; Capital width 350mm; base width 320mm (see below for individual column components). Use with FDP700 if installed externally and finish with suitable exterior grade paint. Column K1002, Base K1152, Capital K1142. Our external range of products are manufactured and designed to be maintenance free for decades to come.
As they can be more complicated to order please call us to discuss any installation issues or questions you may have on 02 9660 2177.
Due to the nature of these products, additional carriage charges will apply.
Dimension: 220mm shaft diameter
Please note columns, capitals and bases are made to order in Belgium, allow 8-10 weeks delivery for manufacture and sea freight.
Installation Guide.
Dimension: Hmax = 2.695 m / Hmin = 2.33m
Click to view product
Half column kit (K1141, K1151 & K1101). Use flat against a wall, or in pairs to wrap around pipework, RSJ's etc. Max height 2255mm. Shaft dia (at base) 220mm. See also component dimensions below. External grade paint required if installed outside.
Dimension: Max Height 2255mm
Ionic half capital with two beautiful volutes called ram's horns.
Dimension: 12.5 x 17 x 35 - Ø 35 cm
Classic panel moulding with gentle curlicues. Can also be used for a nice finish at the bottom of a skirting board. Complements PX103.
.png)
Dimension: L 19 x H 1.2 x W 3.5 cm
Ready to use lightweight acrylic filler · For shrink-proof finishing of gaps (between decorative profiles after adhesion, between wall and profiles, between walls and between wall and ceiling), cracks and irregularities in profiles or on walls · Rapidly repaintable (after 15 min.) · Does not crack.
.png)
Dimension: L 23 x H 6 x W 6 cm
SANITEC SB15 Cove trim
Click to view product
.png)
Rounded panel moulding with an organic acanthus leaf design. Combine it with P3020A for a wall frame full of character.l.
New corner element for P3020 panel moulding, see P3020A
.png)
Dimension: L2m x H60mm x P30mm
Click to view product
Special Order - price on application.
Dimension: L 200 x H 23 x W 11.5 cm
Decorative element (match with P201/A)
Not currently in stock. Non-stock orders allow 15 days delivery, airfreight will incur additional costs, please call to arrange a no obligation quote 02 9660 2177 or arrange a special delivery.
Dimension: 65mm(L) x65mm (H) x10mm (P)
Decorative corbel B403 (click image for larger picture and dimensions). Install with Decofix Pro (from our Accessories section).
Dimension: 19cm (w) x 19cm (h) x 10 (d)
Click to view product
Recessed (medium) niche with opaque base for installing light (not included), highlighting item on display. Max dimensions: 43cm (w), 71cm (h)
Dimension: L 43 x H 1.7 x W 43 cm
Click to view product
Separation segment - fits between P9010 uprights and the left/right arch segments (above)
Dimension: 12.5cm x 5cm x 5cm
Click to view product
Raised panel. Accentuates a flat door, or plain wall area underneath a dado / chair rail. Match with D500, D503, D504 and D507 raised door panels and F30, F31 ceiling/wall tiles.
.png)
Dimension: L 43 x H 1.7 x W 43 cm Duropolymer® ‎
Purpose designed saw to cut our coving and skirting cleanly and easily.
Smaller version of our TF01 dentil/corbel.
Dimension: projection : 200mm height : 100mm width : 78mm
Click to view product
A popular mono-pitched over-door canopy with an authentic Rosemary tiled roof with Shiplap effect edge. Please call for further details. Features * Rosemary tiled roof * Shiplap effect edge * Choice of tile colour * Variable sizes available * Leg brackets * Easy to fit
Dimension: projection: 720mm depth: 1730mm width: 600mm
Second in line in the HERITAGE family. A stately classic cornice moulding inspired by the rich heritage of English country homes. Installation remark: It is necessary to screw this profile on the wall.
.png)
.jpg)
Cornice Installation Guide
Browse our Catalogue
Purotouch Data Sheet - our products are waterproof for indoor and exterior use
C343 Technical Drawing
For more information call (09) 9097858 / 02108066077
Available in two more sizes ...
.png)
.png)
Dimension: L 200 x H 19 x W 25 cm
.png)
Dimension: L200 x H8.3 x W3.4cm
Click to view product
Non standard sizes:
(Note BWO = Brick Work Opening)
- Overall width 1601mm to suit BWO 915mm
- Overall width 1678mm to suit BWO 991mm
- Overall width 1754mm to suit BWO 1068mm
- Overall width 1830mm to suit BWO 1144mm
- Overall width 1906mm to suit BWO 1220mm
Dimension: Standard width 1601mm BWO 915mm
Click to view product
Fluted columns also available in half columns. Special order - 6-8 week delivery. For use indoors or out and in wet areas. Match with K1152. View the full range in Column Menu.
Include C332 Cornice (2m length) and Décor Rail (2m length). A large, timeless classic. Can be installed horizontally or vertically. See lifestyle application image of coving C332 here or here (with additional panel moulding). Match with C217, C334 coving, P8020 or P8040 dado rail and SX118, SX156 skirting board.
Match with any cornice.
For an innovative twist combine this cornice with ultra contemporary Deco Rail. The Deco Rail system provides a functional way of draping curtains and hanging pictures invisibly supported from behind the cornice. No longer will hanging frames damage your walls, suitable for loads from 4 - 20kg.
Use Quick Links to the Accessories Menu to order adhesives.
Dimension: L200cm x H3.45cm x W0.94cm
Hotel Sofitel reception Brussels matching cornice moulds C217 and C333
Another of our bestsellers - Orac Decor C333 - a timeless "swan-neck" design. (Min radius for flexible version 3.3m). See example of coving application image here. And another example (showing as curtain pelmet here). Match with C217, C213 coving, P8020 or P8030 dado rail and SX118, SX156 skirting board.
Use Quick Links to the Accessories Menu to order adhesives.
Dimension: 2m (L) x 120mm (H) x 110mm (P)
FLUXUS another beautiful up- or downlighter.
Splendid up- or downlight. The flowing lines look lovely in any interior. Designed by Ulf Moritz.
.png)
.png)
FAQ
See here for technical details and installation instructions
Indirect Lighting Brochure
PDF C372 Also available in .dwg or .dfx files
FAQ
See here for technical details and installation instructions
Indirect Lighting Brochure
PDF C372 Also available in .dwg or .dfx files please call 02 9700 7222
Dimension: 200x 28 x 7cm
Click to view product
Medium-sized central ceiling ornament with concentric circles. This simple design fits any decorating style. Room to conceal cables.
Installation Guide Ceiling Roses
.png)
.png)
Dimension: L 48.5 x H 3.7 x W 48.5 cm Purotouch® ‎
Flexible version of the C215. Linear, symmetrical profile. This classic cornice moulding is completely at home in any interior. Thanks to its Flex technology, curved walls and surfaces are no problem. Installation remark: It is necessary to screw this profile on the wall. Flex Radius: R min = 160 cm
.png)
Dimension: L 200 x H 4.7 x W 4.7 cm Flex ‎
Dimension: Fabric 150cm (W) Printed Fabric 138cm (W) x Im (L)
Click to view product
- 35mm ceramic disc cartridge can be adjusted to reduce water temperature and flow control settings, saving energy
- Solid brass construction for longevity
- Solid easy-to-grip modular handle
- Twin-stud mounting for secure basin installation
- Stainles steel flexible hoses - 1/2 BSP female
- Suitable for mains pressure installation
Dimension: See \'View Product\'
Click to view product
.png)
Set Pilaster Simple.
| K223 Capital | 22.5 x 10 x 35 cm |
| K220 Pilaster | 200 x 2 x 19.5 cm |
| K255 Base | 54 x 4 x 24.5 cm |
| Height | 276.5 cm |
Simple vase-shaped pilaster head.
Tuscan pilaster foot.
Dimension: Height 276.5cm
Click to view product
Segmented Half Column K4001-5 segments.
| K4131 Capital | |
| K4001 Column (5 Segments) | |
| K4121 Base | |
| Height |
Click to view product
This Straight frame, brother of the Flat lighting profile, is made for those who want to integrate their lighting to their interior in a contemporary and minimalistic way. The compact LEDs are easy to install, have a long life and are also maintenance, environment and energy-friendly.
FAQ
See here for technical details and installation instructions
Indirect Lighting Brochure
PDF C357 Also available in .dwg or .dfx files please call 02 9700 7222
Dimension: 200 x 7.5 x 11 cm
Click to view product
R1.5 External Wall Batts (Thermal)
| Rating | Description | Product Code | Pieces /Bag |
Sq.m/ Bag |
Bags/ Master Bag |
Bags/ Supacube |
$/Bag | $/Sq.m |
| R 1.5 | 75mm x 430mm x 1160mm | K2437521 | 42 | 20.95 | 5 | 25 | $69.95 | $3.32 |
Dimension: 75mm x 430mm x 1160mm ($3.32 Sq.m)
Click to view product
Floor element for the DX170-2300 door casing. Part of the HERITAGE range. Pack of 2 pieces. Price per pack.
Dimension: L 12.6 x H 4.1 x W 16 cm
.jpg)
Beautiful and decadent, match with gold or gilt cornices, cornice also available in white. Synthetic, light-weight easily installed with adhesives.
Dimension: 34 cm diameter
Main profile serving as body for wainscoting. With special border for a swift installation.
Dimension: 200 x 17 x 1 cm
Contact the artist, Sam Rey. Faux fur chair and foot stool.
Commissions accepted POA.
Dimension: Daily charge
Click to view product
Flexible options for smooth walls with Deco Rail
Hooks and Hanging AccessoriesDimension: L2000 x W10 xH35mm
Click to view product
| H=mm | Art. | Finish | $/m |
| 45mm | BT 45 AS | Silver Anodised Aluminium | $21.85 |
| 45mm | BT 45 ASB | Bright Poligished Aluminium Chrome | $35.78 |
Dimension: 4.5cm x m(L)
Click to view product
Wall Protection WA 60 P corner protections in coloured synthetic resin
Synthetic resin corner portection profile, through-coloured to hide the effects of wear and damage. The smooth surface makes it easy to clean and more hyienic than traditional skirtings. Available in colours and a range of dual-coloured options.
Together with an aesthetic value of dual- coloured effect with a darker colour in the central part improves the resistance to trolleys and stretchers passage. These corner protection profiles can be perfectly coordinated with the other profiles in the wall protection range - wall protection strips (WP) and skirting (WB).
.jpg)
Angle Dimension = cm
Finish
Profile Code
6cm x 6cm
White / Grey Insert
WA 60 P11/22
6cm x 6cm
White / Pure White Insert
WA 60 P11/11
6cm x 6cm
Grey / Grey Insert
WA 60 P22/22
Synthetic resin corner portections manufactured with two different types of materil allowing to get a dual-colour effect if required. Resistant to impact damage and most diluted chemicals and detergents.
Material: Resintop
Colours: other colours available on request, minimum order 1000 metres
Length: 2.7 metres
Angle: 6cm x 6cm
Dimension: 2.7 metres L 6c- Angle 6cm x 6cm
This solitary moulding can also be used in two ways: with the flat section against the wall or against the ceiling. Check also its brothers C321, C339 and C332.
Dimension: 200 x 25.6 x 13.5 cm
Click to view product
This profile can be used as a skirting LED for either upward or downward illumination.
Brochure
Dimension: 15mm (W) x 37.3mm (H)
Flexible version of the SX163. Our simplest skirting board is part of the SQUARE family. Thanks to its Flex technology, curved walls and surfaces are no problem. Installation remark: It is necessary to screw this profile on the wall. Flex Radius: R min = 35 cm
Kelle M - Yes, did the installation all by myself. It was really easy. All I needed was a Stanley knife and a caulking gun.
Installation Guide
Available in three sizes.
(3).png)
SX162F.png)
SX157F
Dimension: L 200 x H 10.2 x W 1.3 cm
.jpg)
Dimension: Dimensions: L2300 x H6.6 x W1.3cm‎
Simple block for use as corners for door casings. Eliminates the need for complicated mitring.
.png)
Dimension: L 9.6 x H 9.6 x W 3 cm
.jpg)
Dimension: Dimensions: L2300 x H6.6 x W1.3cm
.png)
Panel moulding embellished with acanthus leaves and almonds. This profile provides some nice detail and is suitable for use in both classic and modern interiors. Combine it with P101A.
Dimension: L 200 x H 4.9 x W 2.4 cm Purotouch® ‎
Cubi W103 is part of the 3D Wall Panels collection. Release your creativity and design a unique work of art that is a perfect fit for you and your interior. Play around with various shapes and use fun colour accents as a finishing touch. To cover 1 square meter you need 9 pieces.
.jpg)
Dimension: L 33.3 x H 2.5 x W 33.3 cm
he smallest member of the HERITAGE family. A stately classic cornice moulding inspired by the rich heritage of English country homes.
Also available in flexible material.
.png)
Dimension: Dimensions: 200 x 8.8 x 12.2cm
This heritage-style cover skirting profile provides an efficient upgrade solution for villa and bungalow restorations throughout New Zealand.
-
Heritage villa upgrades
-
Character residential refurbishments
-
Multi-unit renovations
-
Light commercial interiors
Dimension: Dimensions: 200 x 13.8 x 2.2cm
Click to view product
.png)
Flexible version of the C217. This perfectly symmetrical Canterbury model has the same linear design above and below. Thanks to its Flex technology, curved walls and surfaces are no problem. Installation remark: It is necessary to screw this profile on the wall. Flex Radius: R min = 380 cm
Flexible Installation Guide
.png)
Dimension: L 200 x H 10.3 x W 15.6 cm Flex ‎
Click to view product
Max column height 2695mm; Shaft diameter 220mm; Capital width 350mm; base width 350mm (see below for individual column components). Use with FDP700 if installed externally and finish with suitable exterior grade paint.
Available on Special Order
Dimension: 220mm shaft diameter
Half column kit (K1141, K1131 & K1101). Use flat against a wall, or in pairs to wrap around pipework, RSJ's etc. Max height 2705mm. Shaft dia (at base) 220mm. See also component dimensions below. External grade paint required if installed outside.
Tuscan pedestal for half columns with low rounded socle
Dimension: 20 x 21.5 x 43 - Ø 43 cm
Very small ceiling rose - Click image for larger picture and alternative use as a wall decoration. Use Decofix Pro adhesive FDP500 to install. See R11 Ceiling rose.
Dimension: L 15 x H 4.2 x W 15 cm Purotouch® ‎
Click to view product
Classic panel moulding with gentle curlicues. Can also be used for a nice finish at the bottom of a skirting board. Installation remark: It is necessary to screw this profile on the wall. Flex Radius: R min = 20 cm, R* min = 80 cm
Dimension: 2m (L) x 25mm (H) x 15mm (P)
Retail Counter & Display Wall
Stacked panel mouldings combine to create a textured finish to walls and cabinetry with panel mouldings P3020, P4020, P9010, P9040 and flexible cornice moulding C213/F
Dimension: 2m (L) x 60mm (H) x 30mm (P)
.jpg)
Matching corner element for dado P1020 and P20 (below)
Dimension: 250mm(L) x250mm(H) x25mm(P)
Decorative corbel B404 (click image for larger picture and dimensions). Install with Decofix Pro (from our Accessories section).
Dimension: 19.5cm (w) x 31.5 (h) x 11.5 (d)
Click to view product
Recessed (medium) niche with opaque base for installing light (not included), highlighting item on display Max dimensions: 42cm (w), 76cm (h)
Raised panel. Accentuates a flat door, or plain wall area underneath a dado / chair rail. 'Mouse-over' thumbnail for dimensions and larger image. Match with D500, D503, D504 and D506 raised panels and F30, F31 ceiling/wall tiles.
Dimension: L 55 x H 1.7 x W 90.5 cm Duropolymer® ‎
Raised door panel. Accentuates a flat door, or plain wall area underneath a dado / chair rail. Match with D500, D503, D504 abd D506 raised panels and F30, F31 ceiling/wall tiles.
Dimension: 55 x 90.5 x 1.5cm
Click to view product
As M9010B above, but double width (for use if 2 x P9010 are mounted side-by-side)
Dimension: 22.5cm x 5cm x 5cm
Click to view product
JOINING OR BUTTING ADHESIVE 310mls (7.5m)
It is strongly recommended that this is used for joining all coving, cornice, skirting and panel mouldings - gives an unbreakable bond between sections to prevent any future unsightly cracking or pulling apart of sections. Fits in standard caulking gun (FDP100)
Installation Brochure
Dimension: 310ml Cartridge
Large dentil/corbel feature that can be rotated to best suit property features.
Dimension: projection : 200mm height : 250mm width : 77mm
Click to view product
A popular mono-pitched over-door canopy with an authentic Rosemary tiled roof with Shiplap effect edge. Please call for further details. Features * Rosemary tiled roof * Shiplap effect edge * Choice of tile colour * Variable sizes available * Leg brackets * Easy to fit
Dimension: projection: 720mm depth: 2080mm width: 600mm
This elegant S-shaped cornice moulding creates a nice transition from wall to ceiling.
.png)
Dimension: L 200 x H 5.4 x W 5.5 cm
.png)
Cornice Installation Guide
Browse our Catalogue
Purotouch Data Sheet - our products are waterproof for indoor and exterior use
C344 Technical Drawing
For more information call (09) 9097858 / 02108066077
Available in two more sizes ...
.png)
Dimension: L 200 x H 27.3 x W 35 cm
Click to view product
Allow 10-15 week delivery, additional costs for freight request a quote.
Dimension: Width 1695mm
Multi purpose skirting, architrave or cornice, impact and water resistant. Match with CX161cornice or CX160 trim.
.png)
.png)
Skirting Installation Guide
.png){kind=small}
Dimension: L: 230cm x H: 4cm x W: 1.3cm
See the full range of Luxxus cornices on the main Cornice Menu. Match with panel moulding P8030 and P8030 flexible, skirthing SX118 and Axxent cornice CX124.
Available on Special Order
Dimension: L: 200 cm x H: 5cm x W: 4cm
.png)
Chateau Mont Royal Chantilly, France. Entrance hall cornice CX124, skirting SX118, panel moulding P8030 and dado rail DX 121
The Grandeur Kit is the ultimate expression of Autoire’s bold aesthetic, featuring full-height wall panelling, sculptural details and multi-depth framing. It’s designed to transform walls into grand architectural compositions.
.png)
Dimension: L200 x H27.1 x W26.6cm
Click to view product
Dimension: L 200 x H 4 x W 21.5 cm
Click to view product
.jpg)
.jpg)
Dimension: L 200 x H 8 x W 5 cm‎
Click to view product
Flexible version of the C217. This perfectly symmetrical Canterbury model has the same linear design above and below. Thanks to its Flex technology, curved walls and surfaces are no problem. Installation remark: It is necessary to screw this profile on the wall. Flex Radius: R min = 380 cm
Installation Guide Flexible Moldings
.jpg)
Dimension: L 200 x H 10.3 x W 15.6 cm Flex ‎
Dimension: Fabric 150cm (W) Printed Fabric 138cm (W)
Click to view product
.jpg)
Flexible version of the P3020. Rounded panel moulding with an organic acanthus leaf design. Thanks to its Flex technology, curved walls and surfaces are no problem. Installation remark: It is necessary to screw this profile on the wall. Flex Radius: R min = 50 cm, R* min = 180 cm
Dimension: L 200 x H 6.1 x W 3.2 cm
Set Half Column Corinthian plain low.
| K1121 Capital | 29.5 x 18.5 x 35.5 - Ø 35.5 cm |
| K1101 Column | 201 x 11 x 22 - Ø 22 cm |
| K1151 Base | 12 x 16 x 32 - Ø 32 cm |
| Maximum Height | 242.5 cm |
Corinthian half capital, our most ornamental that has flourishes of acanthus leaves and volutes.
Half column unfluted, plain shaft. Did you know? Cylindrical columns have to be tapered according to strict rules of proportion.
Half Doric pedestal.
Dimension: Max Height 242.5 cm
Click to view product
Set Pilaster Tuscan.
| K224 Capital | 17 x 7.5 x 30.5 cm |
| K220 Pilaster | 200 x 2 x 19.5 cm |
| K255 Base | 54 x 4 x 24.5 cm |
| Height | 271 cm |
Low pilaster crown.
Fluted pilaster shaft. Pilasters provide a sense of style and stateliness to a room. For instance, English Georgian-style houses often include pilasters as trim around the doors.
Tuscan pilaster foot.
Dimension: Height 271 cm
Click to view product
Large Ovolo-inspired cornice moulding. Use this cornice moulding as an uplight to add immediate ambience to any space. Installation remark: It is necessary to screw this profile on the wall.
.png)
See here for technical details and installation instructions
Indirect Lighting Brochure
PDF C900 Also available in .dwg or .dfx files
Dimension: 200 x 7.5 x 14 cm
Click to view product
R1.5 External Wall Batts (Thermal)
| Rating | Description | Product Code | Pieces /Bag |
Sq.m/ Bag |
Bags/ Master Bag |
Bags/ Supacube |
$/Bag | $/Sq.m |
| R 1.5 | 75mm x 430mm x 1160mm | K2437523 | 42 | 28.26 | 4 | 16 | $122.07 | $4.32 |
Dimension: 75mm x 580mm x 1160mm ($4.32 Sq.m)
Click to view product
Flexible version of the X157. Our simplest panel moulding is part of the SQUARE family. Use this multifunctional profile to fit your entire home with the same moulding. All you need to do is select the correct size to fit your space. Installation remark: It is necessary to screw this profile on the wall. Flex Radius: R min = 35 cm, R* min = 260 cm
.png)
Dimension: L 200 x H 6.6 x W 1.3 cm Flex ‎
Beautifully detailed ornate design in gold gilt, match with gilt cornices and corbels, also available in white.
Lightweight synthetic materials easily installed using adhesives.
Dimension: 40 cm diameter
Contact the artist, Sam Rey. Embroidered chair with mosaic legs.
Commissions accepted POA.
Set Full Column Ionic fluted XXL high
Assembly: K3142 + K3002 + K3152
To make a column shorter or longer it is always better to start with the base (the foot) of the column. Columns can't be used to bear constructions but they are ideal to wrap constructive elements. Please check the minimal inside width of the columns.
Installation Guide
Dimension: Hmax = 2.745m Hmin = 2.44m
Click to view product
| H=mm | Art. | Finish | $/m |
| 50 | BIM 800 ASN | BASE Aluminium Silver | $34.29 |
| 30 | BI 800 ASN | TOP Aluminium Silver | $18.55 |
| 30 | BI 800 A 50 | TOP Aluminium Grey Micaceious | $23.85 |
Dimension: 50mm (H) x 1M (L)
Click to view product
Exists in Flex. Flex profiles are really versatile and the finish is far superior to anything one could ever achieve with timber. Especially with design being pushed to its limits these days; rounded lines, circles and curves galore, you will install those flex to your walls and ceilings without any effort at all!
P8030 PDF
Installation
Dimension: 200 x 22.2 x 20.2 cm
Click to view product
.png)
The Click Rail is a flexible picture hanging system that you mount to the wall. Using the Click&Connect system, mounting the rail system is fast and easy. The Click Rail may be installed flush against the ceiling and may also be repainted, for example in the same colour as the wall or ceiling. This helps the picture hanging system ‘blend in’ with the wall or ceiling, making it nearly invisible. The hanging rail’s appearance makes it easy to integrate in any room or interior. You always have flexibility in hanging posters, pictures or photo frames thanks to the hanging wires with hooks that you can click into any desired location on the rail system.
Hooks and Hanging Accessories
Installation Guide
WATCH THE INSTALLATION VIDEO
.png)
Dimension: L2000 x W9 x H25mm
Slim pilaster embellished with vertical grooves. Use DecoFix Extra to glue head or foot.
Dimension: L 13.6 x H 200 x W 1.9 cm
.png)
Dimension: L 9.6 x H 9.6 x W 3.5 cm
Click to view product
.png)
.png)
(3).png)
.png)
Dimension: L 230 x H 10.2 x W 1.3 cm
Rombus W105 is part of the 3D Wall Panels collection. Release your creativity and design a unique work of art that is a perfect fit for you and your interior. Play around with various shapes and use fun colour accents as a finishing touch. To cover 1 square meter you need 13 pieces.
Dimension: L 30 x H 3 x W 34.6 cm
Second in line in the HERITAGE family. A stately classic cornice moulding inspired by the rich heritage of English country homes.
Dimension: Dimensions: 200 x 14 x 19cm
SANITEC SB10 Cove trim
DATASHEET
Click to view product
.jpg)
.jpg)
Dimension: L 200 x H 8 x W 8 cm Purotouch® ‎
.png)
A simple cove with attractive 'cut-out' along the bottom length. 4.5cm x 4.5cm (click image for enlarged picture). Install with Decofix Pro (fixing adhesive/filler) and Extra Fix (for ultra high strength joint bonding). Match with CX126 coving, PX120 or PX113 dado rail, R08 ceiling rose and SX125 skirting board.
100% recyclable, impact and water resistant, great for bathrooms and wet areas.
Use Quick Links to the Accessories Menu to order adhesives. Use only DecoHydro for fixing in wet areas with DecoFix Extra for joining.
NEW! Now available in flexible profiles.
Dimension: 2m (L) x45mm (H) x45mm (P)
This flat cornice moulding which extends along the ceiling provides a floating effect thanks to the recessed shadow line. Designed by Jacques Vergracht.
Dimension: L 200 x H 3.5 x W 11.1 cm
Flexible version of the C220. A classic straight cornice moulding that extends along the ceiling. Thanks to its Flex technology, curved walls and surfaces are no problem. Installation remark: It is necessary to screw this profile on the wall. Flex Radius: R min = 400 cm
Flexible Installation Guide
Dimension: L 200 x H 7.6 x W 11.6 cm Flex ‎
Click to view product
Square decorative ceiling ornament. For use as a wall or ceiling tile.
.jpg)
Dimension: L 59.5 x H 4.3 x W 59.5 cm
Max column height 2370mm; Shaft diameter 300mm; Capital width 450mm; base dia 430mm (see below for individual column components). Use with FDP700 if installed externally and finish with suitable exterior grade paint. Column K3002, Base K2132, Capital K3142. Our external range of products are manufactured and designed to be maintenance free for decades to come.
As they can be more complicated to order please call us to discuss any installation issues or questions you may have on 02 9660 2177.
Due to the nature of these products, additional carriage charges will apply.
Dimension: 300mm shaft diameter
Column
Full column unfluted, plain shaft. Columns are great space dividers. Rooms are then clearly separate, yet flow easily together. This advantage is especially appreciated in small spaces.
Our external range of products are manufactured and designed to be maintenance free for decades to come.
Please note columns, capitals and bases are made to order in Belgium, allow 8-10 weeks delivery for manufacture and sea freight. Call 02 9700 7222 for more details.
Installation Guide.
Dimension: 201 x 22 x 22 - � 22 cm
Click to view product
Half column kit (K3141, K2131 & K3101). Use flat against a wall, or in pairs to wrap around pipework, RSJ's etc. Max height 2380mm. Shaft dia (at base) 300mm. See also component dimensions below. External grade paint required if installed outside.
Very small rose/medallion. Use Decofix Pro adhesive FDP500 to install. Click image to enlarge. Match with R10 ceiling rose.
Dimension: L 19 x H 3.6 x W 19 cm Purotouch® ‎
Click to view product
Classic panel moulding with asymmetrical design. Suitable for use in both classic and modern interiors.
Dimension: L 200 x H 6 x W 2.7 cm
Match with decorative element P20, P101/A decorative corner elements add C201 coving and R74 ceiling rose.
(also available in flexible material)
Dimension: 2m (L) x 50mm (H) x 25mm (P)
.png)
Dimension: L 200 x H 5 x W 2.9 cm Purotouch® ‎
Special Order - Price on Application
Dimension: L 200 x H 27 x W 26 cm
Decorative corbel B408 (click image for larger picture and dimensions). Install with Decofix Pro (from our Accessories section).
Dimension: 22.5cm (w) x 40cm (h) x 13cm (d)
Click to view product
Large recessed niche with opaque base for installing light (not included), highlighting item on display Max dimensions: 69cm (w), 113cm (h)
Deep vee style coving mitre 'box' and saw (FB14). Will accomodate any size of coving, for 45 and 90 degree cuts.
Very unique and individual dentil design, easily fixed to roof soffit.
Dimension: projection : 255mm height : 135mm width : 100mm
Click to view product
A practical and attractive flat over-door canopy with an authentic riven slate effect roof with scalloped or straight detail. Please call for further details. Features * Riven Slate top * Scalloped/straight edge * Variable sizes available * Optional leg brackets * Easy to fit
Dimension: projection: 680mm depth: 1590mm width: 220mm
Simple curve with a subtle carved line below.
Simple curve with a subtle carved line below.
Dimension: L 200 x H 4.4 x W 4.4 cm
.png)
.png)
.png)
Dimension: L 150 x H 50 x W 3.2 cm Purotouch® ‎
Click to view product
.png)
Allow 8-12 weeks delivery freight not included request a quote.
Dimension: Standard width 1770mm
Create mood and understated ambience, with our range of indirect lighting options. Suitable for wet and dry areas. Match with IL002-002 T5 Tubes and IL001-006 light plates. See the full range in the
Dimension: L: 2m x H: 7.3 cm x W: 14cm
Includes CX126 cornice (2m length) and Deco Rail (2m length). For loads of 20kg /m. Orac Decor cornice CX126 only 0.7 Kg / m.
Does the Deco Rail system work with a conventional plaster cornice? NO, tradional plaster is too heavy, Orac Decor cornices are made from Purotouch, Duropolymer and Durofoam any extremely lightweight quality European synthetic mouldings.
Dimension: L200cm x H3.45cm x W0.94cm
Chateau Mont Royal Chantilly, France. Relaxation spa match ceiling rose R08 as to mount wall light, cornice C322, panel moulding P8030 in rigid and flexible materials.
Dimension: Diameter 38cm
Flexible version of the C220. A classic straight cornice moulding that extends along the ceiling. Thanks to its Flex technology, curved walls and surfaces are no problem. Installation remark: It is necessary to screw this profile on the wall. Flex Radius: R min = 400 cm
Installation Guide Flexible Moldings
Dimension: L 200 x H 7.6 x W 11.6 cm Flex ‎
265 gsm (9 oz) high quality, medium weight natural linen. Width is 150 cm (59 inches). Ideal for embroidery, housewares, upholstery and clothing.
Dimension: 150 cm (W)
Flexible version of the P4025. It is unique in its design and fits our other Autoire profiles (W120, W121, C324). It is therefore perfectly fit to create your own custom made framework when already using our ready-made wall panels from the same collection (W120, W121). Flex Radius: R min = 70 cm
Dimension: L 200 x H 8.3 x W 3.4 cm
Dimension: L 200 x H 2 x W 2 cm
Click to view product
Set Half Column Corinthian plain high
| K1121 Captial |
29.5 x 18.5 x 35.5 - Ø 35.5 cm
|
| K1101 Column | 201 x 11 x 22 - Ø 22 cm |
| K1131 Base | 57 x 17.5 x 35 - Ø 35 cm |
| Maximum Height | 287.5 cm |
Corinthian half capital, our most ornamental that has flourishes of acanthus leaves and volutes.
Half column unfluted, plain shaft. Did you know? Cylindrical columns have to be tapered according to strict rules of proportion.
High square socle pedestal for half columns.
Dimension: Max Height 287.5cm
Click to view product
Set Pilaster Corinthian XL.
| K251 Capital | 35.5 x 6 x 43 cm |
| K250 Pilaster | 200 x 2.5 x 27 cm |
| K254 Base | 53 x 7 x 39 cm |
| Height | 288.5 cm |
Large Corinthian capital for pilasters, our most ornamental that has flourishes of acanthus leaves and volutes.
Wide fluted pilaster shaft. Pilasters provide a sense of style and stateliness to a room. For instance, English Georgian-style houses often include pilasters as trim around the doors.
Wide doric pedestal for pilasters.
Dimension: Height 288.5 cm
Click to view product
Inspired by the 1930's, the simple circular form allows the Curve to be present without being intrusive. The LED lighting almost seems to disappear into its surrounds, giving a subtle effect. The compact LEDs are easy to install, have a long life and are also maintenance, environment and energy-friendly.
FAQ
See here for technical details and installation instructions
PDF C362 Also available in .dwg or .dfx files please call 02 9700 7222
Dimension: 200 x 5 x 5 cm
R 2.0 External Wall Batts (Thermal)
| Rating | Description | Product Code | Pieces /Bag |
Sq.m/ Bag |
Bags/ Master Bag |
Bags/ Supacube |
$/Bag | $/Sq.m |
| R 2.0 | 90mm x 430mm x 1160mm | K2437525 | 32 | 15.96 | 5 | 25 | $84.92 | $5.32 |
Dimension: 90mm x 430mm x 1160mm ($5.32 Sq.m)
Click to view product
Beautiful and decadent, match with gold or gilt cornices, cornice also available in white. Synthetic, light-weight easily installed with adhesives.
Dimension: 28cm diameter
Contact the artist, Sam Rey.
Commissions accepted POA.
This anodised aluminium profile has a silver coating. Good tolerance to oxidation and to mechanical impacts. This skirting board is also available in the self-adhesive option for a quicker installation.
.jpg)
Material: Extruded Anodised Aluminium
Colour: Silver
Length: 2 metres
Height: 6cm
| Description | Profile Code |
| Internal Corner | BAI*PS |
| External Corner | BAE*PS |
End caps, internal and external junctions in synthetic resin with the same silver colour to make proper and neat junctions. Available in 6cm height.
Material: Polypropylene
Colour: Silver
Height: 6cm
Dimension: Length 200cm Height 6cm
Click to view product
This large swan-neck profile has been created as part of the "Majestic family" to fit into grand projects and spaces. The S curve with its broken angle is also named the Flemish scroll and was popular in the 17th century during the Flemish Renaissance. This coving has a little brother C333 and bigger proportions with C337.
These substantial sizes are ideal for larger rooms.
PDF C355
Installation
Dimension: 200 x 22.2 x 20.2 cm
Click to view product
.png)
.png)
CONTOUR RAIL
.png)
.png)
Hooks and Hanging AccessoriesInstallation Guide
WATCH THE INSTALLATION VIDEO
Dimension: L2000 x W12.5 x H12.5mm
Click to view product
Small Corinthian capital for pilasters embellished with acanthus leaves and scrolls.
Dimension: L 22.8 x H 14.9 x W 6.2 cm
.png)
.png)
Dimension: SQUARE L 230 x H 10.2 x W 1.3 cm
Click to view product
Dimension: L 9.5 x H 24.9 x W 3.1 cm
Click to view product
Door casing with heavy curvature that fits even the tallest panel moulding seamlessly (such as P4020). Combine with D330LR or other members of the HERITAGE family.
Dimension: L 230 x H 11.9 x W 3.2 cm Duropolymer® ‎
.png)
.png)
Dimension: L 33.3 x H 2.9 x W 33.3 cm ‎
Click to view product
.png)
Flexible version of the C901. Use this cornice moulding as an uplight to add immediate ambience to any space. Thanks to its Flex technology, curved walls and surfaces are no problem. Installation remark: It is necessary to screw this profile on the wall. Flex Radius: R min = 600 cm
Dimension: L 200 x H 14.8 x W 12.4 cm Flex ‎
Second in line in the HERITAGE family. A stately classic cornice moulding inspired by the rich heritage of English country homes.
Dimension: Dimensions: 200 x 15 x 21cm
SANITEC - STAINLESS STEEL HYGENIC COVING
.png)
Steel profiles are made by cold forming sheets of constant thickness, thus differing from the corresponding aluminum and brass versions made by hot extrusion, while maintaining their application and dimensional characteristics. Stainless steel effectively resists high mechanical stress and is particularly suitable for use in the chemical, food, and hospital sectors, where hygiene, durability, and chemical resistance are essential. Normally produced with a semi-gloss finish, a brushed finish can also be achieved by partially removing material using rotating nylon and quartz fiber brushes. This process gives the surface a matte appearance without altering its characteristics.
This steel belongs to the AUSTENITIC category and is the most widespread and commonly used alloy for products requiring high technical and performance characteristics. It is highly resistant to most chemical agents but may stain or darken superficially; a standard polishing product is sufficient to restore its original appearance.
Click to view product
Simple flat cornice moulding with shadow line at the back. Makes the transition from wall to ceiling just a bit more interesting. Designed by Jacques Vergracht.
Dimension: L 200 x H 2 x W 10 cm
Flexible Installation Guide
Dimension: L 200 x H 2.9 x W 2.9 cm Flex ‎
Click to view product
The W120 Wall Panel is unique: a ready-made wall panel with a lot of detail for easy, fast and beautifully finished installation. It is an economical solution for wall depth creation and can be made even more dynamic by filling it up with our insert W122 and/or W123.
.png)
Dimension: L 150 x H 3.2 x W 50 cm
Max column height 2745mm; Shaft diameter 300mm; Capital width 455mm; base dia 430mm (see below for individual column components). Use with FDP700 if installed externally and finish with suitable exterior grade paint. Column K3002, Base K3152, Capital K3142. Our external range of products are manufactured and designed to be maintenance free for decades to come.
As they can be more complicated to order please call us to discuss any installation issues or questions you may have on 02 9660 2177.
Due to the nature of these products, additional carriage charges will apply.
Dimension: 300mm shaft diameter
Tuscan pedestal for full columns with low rounded socle.
Please note columns, capitals and bases are made to order in Belgium, allow 8-10 weeks delivery for manufacture and sea freight. For more information please call 02 9700 7222.
Installation Guide.
Dimension: 20 x 43 x 43 - Ø 43 cm
Click to view product
Half column kit (K3141, K3151 & K3101). Use flat against a wall, or in pairs to wrap around pipework, RSJ's etc. Max height 2755mm. Shaft dia (at base) 300mm. See also component dimensions below. External grade paint required if installed outside.
Large tapered half shaft with top outline.
Dimension: 202 x 15 x 30.5 - Ø 30.5 cm
Small flower template ceiling rose - click image to enlarge and see use as a wall decoration. Use Decofix Pro adhesive FDP500 to install. See also R13 ceiling rose.
Dimension: Diameter 20cm
Simple panel moulding with a linear pattern and rounded corners.
Dimension: L 200 x H 3.1 x W 1 cm ‎
Match with decorative element P21 and SX118, SX156 skirting board. Also available in flexible material.
Dimension: 2m (L) x 45mm (H) x 25mm (P)
.png)
Rounded corner for panel moulding P4020 to create lovely wall frames.
Dimension: L 16.4 x H 2.9 x W 9.1 cm Purotouch®
Uplighter Coving C902 lighting trough (a slightly smaller version of the above) - flexible version min radius 3.8m. Click here for application image of cornice fitted 'normally' (with additional panel mouldings P4020 & P7020) Match with C900, C901 coving, P8020, P8030 dado rail and SX118, SX156 skirting board.
See here for technical details and installation instructions
Indirect Lighting Brochure
Use Quick Links to the Accessories Menu to order adhesives.
Dimension: 2m (L) x 100mm (H) x 100mm (P)
Decorative corbel B409 (click image for larger picture and dimensions). Install with Decofix Pro (from our Accessories section).
Dimension: 30cm (w) x 35cm (h) x 17.5cm (d)
Click to view product
Large recessed niche with opaque base for installing light (not included), highlighting item on display Max dimensions: 69cm (w), 113cm (h)
Left and right arch segment (Set of 2 L & R segments)
Dimension: 64.5cm x 32cm x 3cm
Click to view product
One of the most popular historical dentil patterns, featured on many properties in the UK
Dimension: projection : 175mm height : 75mm width : 155mm
Click to view product
A beautiful hipped style over-door canopy with an authentic Rosemary tiled roof detail. Please call for further details. Features * Rosemary tiled roof * Hipped style * Choice of tile colour * Variable sizes available * Leg brackets (2 styles) * Easy to fit
Dimension: projection: 585mm depth: 1500mm width: 640mm
Add subtle sophistication to your space with this classic, elegantly curved door casing. Complete the space with other products from the HERITAGE family.
.png)
Dimension: L 230 x H 6 x W 2.2 cm
This classic cornice moulding creates an elegant transition from wall to ceiling.
Dimension: L 200 x H 4.5 x W 4.1 cm
Note: BWO = Brick Work Opening
Allow 8-12 weeks delivery freight not included request a quote.
Dimension: Width 1346mm BWO 889mm
See the full range of Luxxus cornices on the main Cornice Menu. Match with panel moulding P8030 and P8030 flexible, skirthing SX118 and Axxent cornice CX124.
Available on Special Order
Dimension: L: 200 cm x H: 5cm x W: 4cm
Chateau Mont Royal Chantilly, France. Bathroom archway decorated with P9010, M9010L, M9010B, flexible panel moulding P9020F and flexible skirting SX118/F.
Match with D300 architrave foot and the Byblos Arch Facia System. Flexible option available.
Dimension: 2m (L) x 90mm (H) x 30mm (P)
FAQ
See here for technical details and installation instructions
Indirect Lighting Brochure
PDF C372 Also available in .dwg or .dfx files
FAQ
See here for technical details and installation instructions
Indirect Lighting Brochure
PDF C372 Also available in .dwg or .dfx files please call
02 9700 7222Dimension: 200 x 28 x 7 cm
Click to view product
Flexible version of the C230. Narrow cornice moulding with a classic linear design. Thanks to its Flex technology, curved walls and surfaces are no problem. Installation remark: It is necessary to screw this profile on the wall. Flex Radius: R min = 150 cm
Installation Guide Flexible Moldings
Dimension: L 200 x H 2.9 x W 2.9 cm Flex ‎
265 gsm (9 oz) high quality, medium weight natural linen. Width is 150 cm (59 inches). Ideal for embroidery, housewares, upholstery and clothing.
This fabric is Made in Europe and is MoL (Masters of Linen) accredited. Sanforized (pre-shrunk). Machine washable. Dry cleanable.
Dimension: 150 cm (W)
Flexible version of the P7070. Art Deco-style panel moulding with a stepped design. Thanks to its Flex technology, curved walls and surfaces are no problem. Installation remark: It is necessary to screw this profile on the wall. Flex Radius: R min = 30 cm, R* min = 230 cm
Dimension: L 200 x H 7.4 x W 2.2 cm
Click to view product
Set Half Column Corinthian fluted low
| K1121 Capital | 29.5 x 18.5 x 35.5 - Ø 35.5 cm |
| K1001 Column | 200 x 11 x 22 - Ø 22 cm |
| K1151 Base | 12 x 16 x 32 - Ø 32 cm |
| Maximum Height | 241.5 cm |
Corinthian half capital, our most ornamental that has flourishes of acanthus leaves and volutes.
Half column fluted shaft.
Half Doric pedestal base.
Dimension: Max Height 241.5 cm
Click to view product
Set Pilaster Ionic.
| K253 Capital | 13.5 x 6.5 x 47 cm |
| K250 Pilaster | 200 x 2.5 x 27 cm |
| k254 Base | 53 x 7 x 39 cm |
| Height | 266.5 cm |
Ionic capital for pilaster with two beautiful volutes.
Wide fluted pilaster shaft. Pilasters provide a sense of style and stateliness to a room. For instance, English Georgian-style houses often include pilasters as trim around the doors.
Wide doric pedestal for pilasters.
Dimension: Height 266.5cm
Click to view product
.png)
.jpg)
R 2.0 External Wall Batts (Thermal)
| Rating | Description | Product Code | Pieces /Bag |
Sq.m/ Bag |
Bags/ Master Bag |
Bags/ Supacube |
$/Bag | $/Sq.m |
| R 2.0 | 90mm x 580mm x 1160mm | K2437528 | 32 | 21.53 | 4 | 16 | $136.07 | $6.32 |
Dimension: 90mm x 580mm x 1160mm ($6.32 Sq.m)
Click to view product
Beautiful and decadent, match with gold or gilt cornices, cornice also available in white. Synthetic, light-weight easily installed with adhesives.
Dimension: 40 cm diameter
Contact the artist, Sam Rey. Embroidered chair with mosaic legs.
Commissions accepted POA.
H=cm
Finish
Product Code
6cm
Polished Stainless Steel not self-adhesive
BA 600 ILN
6cm
Polished Stainless Steel self-adhesive
BA 600 ILA
8cm
Polished Stainless Steel not self-adhesive
BA 800 ILN
8cm
Polished Stainless Steel self-adhesive
BA 800 ILA
Material:
Polished Stainless Steel: AISI 304
Length: 2.7 metres
Height: 6cm: 8cm
Available PVC junctions and end-caps in stainless steel colour.
Internal Corner
BAI-PA
External Corner
BAE-PI
End-cap
BAT-PI
Dimension: 2.7 metres L x 6cm or 8cm H Depth 1cm
Exists in Flex. Flex profiles are really versatile and the finish is far superior to anything one could ever achieve with timber. Especially with design being pushed to its limits these days; rounded lines, circles and curves galore, you will install those flex to your walls and ceilings without any effort at all!
PX103 PDF
PX103A PDF
Flexible Installation
Dimension: 200 x 2.5 x 1.2 cm
Click to view product
.png)
.png)
Contour Rail glued - hanging without drilling
Hooks and Hanging AccessoriesDimension: CONTOUR RAIL GLUED
Click to view product
Dimension: L 200 x H 14.8 x W 1.7 cm
Click to view product
.png)
Dimension: L 18.5 x H 54.1 x W 4.1 cm
Click to view product
.jpg){kind=small}
This large, simple skirting board is part of the SQUARE family. Use this multifunctional profile to fit your entire home with the same skirting board. All you need to do is select the correct size to fit your space.
.png)
.png)
.png)
Skirting Installation Guide
Browse our Catalogue
Duropolymer Data Sheet - our products are waterproof for indoor and exterior use
SX163 Technical Drawing
For more information call (09) 9097858 / 02108066077
Available in ...
Dimension: L 230 x H 10.2 x W 1.3 cm
D400 embellishes and accentuates casings for interior arches, entryways and windows.
Dimension: L 127.5 x H 5.5 x W 14.5 cm Purotouch® ‎
.png){kind=small}
Circle is part of the 3D Wall Panels collection. Release your creativity and design a unique work of art that is a perfect fit for you and your interior. Play around with various shapes and use fun colour accents as a finishing touch. Designed by Orio Tonini. To cover 1 square meter you need 9 pieces.
Dimension: L 33.3 x H 2.9 x W 33.3 cm
Flexible version of the C902. Use this cornice moulding as an uplight to add immediate ambience to any space. Thanks to its Flex technology, curved walls and surfaces are no problem. Installation remark: It is necessary to screw this profile on the wall. Flex Radius: R min = 600 cm
.png)
.png)
Dimension: L 200 x H 10.3 x W 10.3 cm Flex ‎
.png)
.png)
Dimension: L 50 x H 50 x W 3.2 cm Purotouch® ‎
Click to view product
A clean, modern profile from the Steps range. The angled corners above and below provide additional subtle shadow lines. Designed by Orio Tonini.
Dimension: Second in line in the HERITAGE family. A stately classic cornice moulding inspired by the rich heritage of English country homes.
SANITEC SB 30 Cove trim
Hygienic cove shaped profiles between wall and wall and between wall and floor. Connections between the wall and the bathtub, the shower tray or the kitchen surface. The silicones that are normally used lose their anti-mold properties after a few months producing unsightly halos or stains. SB30 is a plastic profile with a rear support to facilitate the application and grip of the silicone with which it is installed on the walls. Improve or restore the appearance of the corners, making them more hygienic.
Click to view product
.png)
Dimension: L 200 x H 11.6 x W 13.3 cm Purotouch® ‎
.jpg)
The W121 Wall Frame is unique: a ready-made wall panel with a lot of detail for easy, fast and beautifully finished installation. It is an economical solution for wall depth creation and can be made even more dynamic by filling it up with with our insert W122 or W123.
Dimension: L 50 x H 3.2 x W 50 cm
Max column height 2430mm; Shaft diameter 220mm; Capital width 365mm; base dia 320mm (see below for individual column components). Use with FDP700 if installed externally and finish with suitable exterior grade paint. Column K1102, Base K1152, Capital K1112. Our external range of products are manufactured and designed to be maintenance free for decades to come.
As they can be more complicated to order please call us to discuss any installation issues or questions you may have on 02 9660 2177.
Due to the nature of these products, additional carriage charges will apply.
Dimension: 220mm shaft dia
Fluted column shaft (305mm dia). Height 2010mm.
Available on Special Order
Half column kit (K1141, K1151 & K1001). Use flat against a wall, or in pairs to wrap around pipework, RSJ's etc. Max height 2245mm. Shaft dia (at base) 220mm. See also component dimensions below. External grade paint required if installed outside.
Decorative rosette with a design of flowers and foliage. Can be used to conceal cables.
Installation Guide Ceiling Roses
.png)
Dimension: L 28 x H 3.1 x W 28 cm Purotouch® ‎
Simple panel moulding with a linear pattern and serrated design.
Dimension: L 200 x H 3.5 x W 1.5 cm
Orac Decor coving/cornice lighting trough - install 15-20 cm from ceiling for full room surround lighting effect. "Mouse over" picture for profile dimensions (cm's). Light fitting options can be found further down in the product list.
Use Quick Links to the Accessories Menu to order adhesives.
See here for technical details and installation instructions
Indirect Lighting Brochure
Dimension: L: 2m x H: 8cm x W: 17.5cm
Decorative corbel B410 (click image for larger picture and dimensions). Install with Decofix Pro (from our Accessories section).
Dimension: 19.5cm (w) x 50cm (h) x 16cm (d)
Click to view product
Large recessed niche with opaque base for installing light (not included), highlighting item on display Max dimensions: 69cm (w), 113cm (h)
A beautiful hipped style over-door canopy with an authentic Rosemary tiled roof detail. Please call for further details. Features * Rosemary tiled roof * Hipped style * Choice of tile colour * Variable sizes available * Leg brackets (2 styles) * Easy to fit
Dimension: projection: 585mm depth: 1840mm width: 640mm
Extremely simple moulding with thin edges to align perfectly with your wall and ceiling. This bestseller fits any interior.
Dimension: L 200 x H 8.7 x W 8.7 cm
External cornice with thin edging to blend in with wall and soffit.
Dimension: 2m (L) x 90mm (H) x 90mm (P)
Note: BWO = Brick Work Opening
Allow 8-12 weeks delivery freight not included request a quote.
Dimension: Width 1392mm BWO 895mm
NEW - Product finished with RAL9003 Signal white. It is not necessary to repaint this profile after installation. This large, simple skirting board is part of the SQUARE family. Use this multifunctional profile to fit your entire home with the same skirting board. All you need to do is select the correct size to fit your space.
.png)
(8).png)
Dimension: L 230 x H 10.2 x W 1.3 cm Duropolymer® ‎
Multi - purpose skirting / architrave / cornice, contemporary styling. Match with panel moulding PX116 PX103 and cornice CX161.
100% recyclable.
Imact and water resistant, great for bathrooms and wet areas.
Use Quick Links to the Accessories Menu to order adhesives. Use only DecoHydro for fixing in wet areas with DecoFix Extra for joining.
Dimension: L: 230cm x H: 6cm x W: 1.2cm
Chateau Mont Royal Chantilly, France. Hallway lighting, R08 used to mount wall light, panel moulding P8030 in rigid and flexible materials.
See below for matching corner profile elements Match with P8030/C , P8030/D dado rail, C213, C217 and SX118 skirting board.
Dimension: 2m (L) x 40mm (H) x 15mm (P)
This profile integrates indirect lighting in your interior in a contemporary and minimalist fashion. Designed by Jacques Vergracht. Installation remark: It is necessary to screw this profile on the wall.
Dimension: L 200 x H 7.1 x W 11 cm
Dimension: L 200 x H 10.8 x W 1.3 cm
Click to view product
Flexible version of the C240. Simple hollow cornice moulding, perfect for an unobtrusive, neat transition from wall to ceiling. Thanks to its Flex technology, curved walls and surfaces are no problem. Installation remark: It is necessary to screw this profile on the wall. Flex Radius: R min = 270 cm
Installation Guide Flexible Moldings
.png)
Dimension: L 200 x H 8 x W 8 cm Flex ‎
Any of the designs can be printed on this fabric, please email your requirements.
Dimension: 145cm (W)
Click to view product
Set Half Column Corinthian fluted high
High square socle pedestal for half columns.
| K1121 Capital | 29.5 x 18.5 x 35.5 - Ø 35.5 cm |
| K1001 Column | 200 x 11 x 22 - Ø 22 cm |
| K1131 Base |
57 x 17.5 x 35 - Ø 35 cm
|
| Maximum Height | 286.5 cm |
Corinthian half capital, our most ornamental that has flourishes of acanthus leaves and volutes.
Half column fluted shaft.
High square socle pedestal for half columns.
Dimension: Max Height 286.5 cm
Click to view product
Set Pilaster Corinthian Small.
| K201 Capital | 15 x 6 x 23 cm |
| K200 Pilaster | 200 x 2 x 13.5 cm |
| K202 Base | 54 x 4 x 18.5 cm |
| Height | 269 cm |
Small Corinthian capital for pilasters, our most ornamental that has flourishes of acanthus leaves and volutes.
Narrow fluted pilaster. Pilasters provide a sense of style and stateliness to a room. For instance, English Georgian-style houses often include pilasters as trim around the doors.
Narrow simple tuscan pedestal for pilaster.
Dimension: Height 269 cm
Click to view product
.png)
.jpg)
Duropolymer - strong, knock resistant, lightweight, water-proof, won't crack or split. Easily installed, pre-primed.
Dimension: 200 x 9 x 9 cm
Click to view product
Beautiful and decadent, match with gold or gilt cornices, cornice also available in white. Synthetic, light-weight easily installed with adhesives.
Dimension: 43 cm diameter
Contact the artist, Sam Rey. Embroidered chair with mosaic legs.
Commissions accepted POA.
.jpg)
Skirting BA-AS Silver Anodised Aluminium
Available in three heights, 4.5cm , 6cm , 8cm , 10cm
This anodised aluminium profile has a silver coating. Good tolerance to oxidation and to mechanical impacts. This skirting is also available in self-adhesive option of a quicker installation.
| H=cm | Finish | Profile Code |
| 4.5cm | Silver Anodised Aluminium | BA 450 ASN |
| 4.5cm | Silver Anodised Aluminium | BA 450 ASA |
| 6cm | Silver Anodised Aluminium | BA 600 ASN |
| 6cm | Silver Anodised Aluminium | BA 600 ASA |
| 8cm | Silver Anodised Aluminium | BA 800 ASN |
| 8cm | Silver Anodised Aluminium | BA 800 ASA |
| 10cm | Silver Anodised Aluminium | BA 1000 ASN |
| 10cm | Silver Anodised Aluminium | BA 1000 ASA |
.jpg)
.jpg)
Material: Extruded Anodised Aluminium
Colour: Silver
Length 2.00 metres
Height: 4.5cm , 6cm , 8cm , 10cm
Available junction and end-caps in synthetic resin Silver colour for BA 6cm / 8cm H skirtings.
| Joint | Finish | Profile Code |
| External Corner | Anodised Silver | BAE AS |
| Internal Corner | Anodised Silver | BAI AS |
Material: Polypropylene
Colour: Silver
Height: 4.5cm , 6cm , 8cm , 10cm
| H=cm | Finish | Profile Code |
| 6cm | Corten | BA 600 A60 |
| 6cm | Micaceous Grey | BA 600A50 |
Material: Extruded Powder Coated Aluminium
Length: 2.00 metres
Colour: , Micaceous Grey , Corten
Height: 6cm
Dimension: 200cm L x (4.5cm H) : (6cm H) : (8cm( H) : (10cm H)
Click to view product
Soft baroque curls and minimalistic design meet up to integrate past and future. Not avant-garde, not antique, simply unique. This profile can be used as a base cap to finish off the bottom of a baseboard, especially when the floors are not even (to hide a gap). Bigger brother to PX103. Use the PX120A wall panel corner to make frames on your wall. Works well with the SX118 skirting board.
Use panel mouldings to create wall frames or wainscoting. These can evoke the atmosphere of stately homes, and tastefully protect your walls. They are equally suitable for both modern and classical homes, and can bring texture to any wall.
Exists in Flex. Flex profiles are really versatile and the finish is far superior to anything one could ever achieve with timber. Especially with design being pushed to its limits these days; rounded lines, circles and curves galore, you will install those flex to your walls and ceilings without any effort at all!
PX120 PDF
PX120A PDF
Flexible Installation
Dimension: 200 x 4 x 1.9 cm
Click to view product
CLICK RAIL PRO
.png)
.png)
Hooks and Hanging AccessoriesDimension: L2000 x W10mm x H38 mm
Click to view product
With this modern profile, you can perfectly integrate indirect LED lighting into your interior.
Want to take it to the next level? Combine it with the other L3 profiles (C381, C382, C383) and create a sophisticated linear pattern of light and shadow.
Dimension: 200 x 5 x 5 cm
D401 embellishes and accentuates casings for interior arches, entryways and windows with a pattern of blocks.
Dimension: L 127.5 x H 5.5 x W 14.5 cm
.jpg)
Flexible version of the CX188. Rounded compact design profile for indirect LED lighting. Thanks to its Flex technology, curved walls and surfaces are no problem. Designed by Orio Tonini. Installation remark: It is necessary to screw this profile on the wall. Use an aluminum tape on the inside of the profile, or an aluminum LED support to avoid the light showing through the moulding. Flex Radius: R min = 110 cm
.jpg)
Dimension: 200 x H 3.4 x W 3 cm Flex ‎
Rounded corner for panel moulding P8020 to create lovely wall frames.
Dimension: L 19.8 x H 2.6 x W 11
Flexible version of the P8020. This panel moulding's elegant design provides any space with refined allure. Thanks to its Flex technology, curved walls and surfaces are no problem. Installation remark: It is necessary to screw this profile on the wall. Flex Radius: R min = 40 cm, R* min = 130 cm
.png)
.png)
Check the flexible cornice minimum radius chart.
Dimension: L 200 x H 6 x W 2.6 cm Flex ‎
Click to view product
Large Ovolo-inspired cornice moulding. Fits all types of interiors effortlessly.
Also available in flexible material.
Dimension: Dimensions: 200 x 14.8 x 12.4cm
SANITEC SB 24 Cove trim
Click to view product
.png)
Dimension: L 200 x H 10.3 x W 15.6 cm Purotouch® ‎
Coving CX112 - 4cm x 5.5cm (move over image for enlarged picture). Install with Decofix Pro (fixing adhesive/filler) and Extra Fix (for ultra high strength joint bonding). 2m sections only. Match with CX100 coving, PX116, PX117 dado rail, R08 ceiling rose and SX125 skirting board.
100% recyclable, impact and water resistant, great for bathrooms and wet areas.
Use Quick Links to the Accessories Menu to order adhesives. Use only DecoHydro for fixing in wet areas with DecoFix Extra for joining.
Available on Special Order
Dimension: 2m (L) x55mm (H) x40mm (P)
Click to view product
.jpg)
Flexible version of the C321. Classic Cotswold model with linear design. Thanks to its Flex technology, curved walls and surfaces are no problem. Installation remark: It is necessary to screw this profile on the wall. Flex Radius: R min = 140 cm
Flexible Installation Guide
Dimension: L 200 x H 9.9 x W 5 cm Flex ‎
Max column height 2880mm; Shaft diameter 220mm; Capital width 365mm; base width 350mm (see below for individual column components). Use with FDP700 if installed externally and finish with suitable exterior grade paint. Column K1102, Base K1132, Capital K1112. Our external range of products are manufactured and designed to be maintenance free for decades to come.
As they can be more complicated to order please call us to discuss any installation issues or questions you may have on 02 9660 2177.
Due to the nature of these products, additional carriage charges will apply.
Dimension: 220mm shaft dia
Half column kit (K1141, K1131 & K1001). Use flat against a wall, or in pairs to wrap around pipework, RSJ's etc. Max height 2695mm. Shaft dia (at base) 220mm. See also component dimensions below. External grade paint required if installed outside.
Large ionic half capital with two beautiful volutes called ram's horns.
Dimension: 16 x 22.5 x 45 - Ø 45 cm
Installation Guide Ceiling Roses
Dimension: L 33 x H 3 x W 33 cm Purotouch® ‎
Click to view product
.png)
Also available in a smaller size ...
.png)
Dimension: L 200 x H 4 x W 1.9 cmx
Click to view product
Orac Decor coving/cornice lighting trough - install 15-20 cm from ceiling for full room surround lighting effect. "Mouse over" picture for profile dimensions (cm's).
Use Quick Links to the Accessories Menu to order adhesives.
See here for technical details and installation instructions
Indirect Lighting Brochure
Dimension: L: 2m x H: 7.5cm x W: 17cm
Large recessed niche with opaque base for installing light (not included), highlighting item on display Max dimensions: 69cm (w), 113cm (h)
Dimension: L 200 x H 6 x W 2.6 cm Purotouch®
Click to view product
A beautiful hipped style over-door canopy with an authentic Rosemary tiled roof detail. Please call for further details. Features * Rosemary tiled roof * Hipped style * Choice of tile colour * Variable sizes available * Leg brackets (2 styles) * Easy to fit
Dimension: projection: 585mm depth: 2180mm width: 640mm
External cornice based on our best selling internal profile (CX106)
Dimension: 2m (L) x 120mm (H) x 120mm (P)
Non standard sizes:
(Note BWO = Brick Work Opening)
- Width 1830mm projection 127mm
- Width 2135mm projection 127mm
- Width 2440mm projection 127mm
Dimension: Standard width 1830mm projection 127mm
Click to view product
Dimension: L 200 x H 9.4 x W 9.4 cm
Click to view product
Match with DX162-2300 architrave, skirting SX118, cornice CX126
100% recyclable.
Imact and water resistant, great for bathrooms and wet areas.
Use Quick Links to the Accessories Menu to order adhesives. Use only DecoHydro for fixing in wet areas with DecoFix Extra for joining.
Dimension: L: 200cm x H: 18cm x W: 1cm
Chateau Mont Royal Chantilly, France. Indoor pool, cornice C200 used in combination with columns K3112, K3102 with wall panelling P8030 and PX103
Lighting profile with surprising angled corner. The hollow profile with shadow line conceals the LED strip perfectly and ensures optimal light distribution. Designed by Jacques Vergracht. Installation remark: It is necessary to screw this profile on the wall.
.jpg)
Dimension: L 200 x H 7.3 x W 14 cm
Click to view product
Flexible version of the C250. This traditional, symmetrical cornice moulding is the smallest in our range. Thanks to its Flex technology, curved walls and surfaces are no problem. Installation remark: It is necessary to screw this profile on the wall. Flex Radius: R min = 70 cm
Installation Guide Flexible Moldings
.png)
Dimension: L 200 x H 1.6 x W 1.6 cm Flex ‎
Machine washable. Expect some shrinkage after first wash.
Dimension: 45 x 45 cm
Click to view product
Flexible version of the P8030. This panel moulding's elegant design provides any space with refined allure. Thanks to its Flex technology, curved walls and surfaces are no problem. Installation remark: It is necessary to screw this profile on the wall. Flex Radius: R min = 20 cm, R* min = 70 cm
.png)
Also available in ...
.png)
Dimension: L 200 x H 4.1 x W 1.7 cm Flex ‎
Set Half Column Doric plain low.
| K1111 Capital | 30 x 18.5 x 36.5 - Ø 36.5 cm |
| K1101 Column | 201 x 11 x 22 - Ø 22 cm |
| K1151 Pedestal | 12 x 16 x 32 - Ø 32 cm |
| Maximum Height | 243 cm |
Simple Doric half capital.
Half column unfluted, plain shaft. Did you know? Cylindrical columns have to be tapered according to strict rules of proportion.
Half Doric pedestal.
Dimension: Max Height 243 cm
Click to view product
Set Corinthian Frame.
| K201 L/R | 23 x 15 x 6 cm |
| K200 Pilaster | 200 x 2 x 13.5 cm |
| D320 | 25 x 2.5 x 13.5 cm |
| Height | 248 cm |
Small Corinthian capital corners for pilasters, our most ornamental that has flourishes of acanthus leaves and volutes.
Narrow fluted pilaster. Pilasters provide a sense of style and stateliness to a room. For instance, English Georgian-style houses often include pilasters as trim around the doors.
Pilasters Door Frames Byblos.
Dimension: Height 248 cm
Click to view product
Duropolymer - strong, knock resistant, lightweight, water-proof, won't crack or split. Easily installed, pre-primed.
Dimension: 200 x 4.5 x 4.5 cm
Beautifully detailed ornate design in gold gilt, match with gilt cornices and corbels, also available in white.
Lightweight synthetic materials easily installed using adhesives.
Dimension: 43 cm diameter
Contact the artist, Sam Rey. Embroidered chair with mosaic legs.
Commissions accepted POA.
.png)
Available in other sizes ...
.png)
SX165F .png)
SX172FDimension: L 200 x H 13.8 x W 1.8 cm Flex ‎
Click to view product
Skirting BT (Available in AS Silver Anodised Aluminium & ASB Bright Polished Aluminium Chrome Effect)
Minimal profile in aluminium conceived for skirting with low thickness or vitreous mosaic coverings. The profile contoured ends give a snug fit on the wall covering over the bottom perimeter along the dilation gap joint, thus ensuring the necessary expansion movement to the floor and hiding any defects in cutting of the skirting material / tile. Can be used as a base or base & cap.
| H=cm | Finish | Product Code |
| 4.5cm | Silver Anodised Aluminium | BT 45 AS |
| 4.5cm | Bright Polished Aluminium Chrome Effect | BT 45 ASB |
BT 45 AS Silver Anodised Aluminium
A silver coated aluminium profile which offers adequate protection and tolerance to wear over time.
Material: Extruded Anodised Aluminium
Colour: Silver
Length: 2.7 metres
BT 45 ASB Bright Polished Aluminium -Chrome Effect
The surface of this anodised aluminium profile has been chrome -effect treated in order to give that sparkling effect in combination sith bathroom ware. It holds the same properties as the other aluminium models.
Material: Extruded Anodised Aluminium
Colour: Bright Coloured Chrome
Length: 2.7 metres
.jpg)
Dimension: 2.7m L x 4.5cm W
Click to view product
Big brother to PX117 200 x 3.5 x 1.5 cm, great dado and panel frame combination.
Dimension: 200 x 6 x 2.7 cm
Click to view product
.png)
This modern profile allows you to effortlessly integrate indirect LED lighting into your interior. Combine it with the other L3 profiles (C380, C381, C383) for an interplay of light and shadow. Designed by Orio Tonin.
See here for technical details and installation instructions
Indirect Lighting Brochure
PDF C381 Also available in .dwg or .dfx files
Dimension: 200 x 14 x 5 cm
P3070 PDF
Dimension: Dimensions: 200 x 12.5 x 3.2cm
Simple keystone for the centre of a casing. Combine with D400 or D401
Dimension: L 14.5 x H 5.5 x W 12 cm
Zigzag is part of the 3D Wall Covering collection. Release your creativity and design a unique work of art that is a perfect fit for you and your interior. Play around with various shapes and use fun colour accents as a finishing touch. Designed by Orio Tonini. To cover 1 square meter you need 2 pieces.
Dimension: L 200 x H 25 x W 1.8 cm Purotouch® ‎
Flexible version of the CX189. Compact angular design profile for indirect LED lighting. The subtle shadow line adds to the lighting's ambience. Designed by Orio Tonini. Installation remark: It is necessary to screw this profile on the wall. Use an aluminum tape on the inside of the profile, or an aluminum LED support to avoid the light showing through the moulding. Flex Radius: R min = 90 cm
Dimension: L 200 x H 2.7 x W 2.7 cm Flex ‎
A contemporary cornice moulding with multiple applications. Here we fix the largest section to the wall for an elevated effect. Designed by Ulf Moritz.
Dimension: Dimensions: 200 x 11 x 14cm
SANITEC SB 20 Cove trim
.png)
Click to view product
Dimension: L 200 x H 17.6 x W 13 cm Purotouch® ‎
.png)
Timeless narrow, flat cornice moulding with shadow line at the back. Designed by Jacques Vergracht.
Dimension: L 200 x H 2.1 x W 6 cm Purotouch® ‎
.png)
Dimension: 200 x H 4.1 x W 1.7 cm Purotouch®
Click to view product
Slightly smaller version of coving pattern CX109 above. 3cm x 3cm (move over image for enlarged picture). Install with Decofix Pro (fixing adhesive/filler) and Extra Fix (for ultra high strength joint bonding). Match with CX111, CX132, CX133 coving, PX103, PX116 dado rail and SX125 skirting board.
100% recyclable, impact and water resistant, great for bathrooms and wet areas.
Use Quick Links to the Accessories Menu to order adhesives. Use only DecoHydro for fixing in wet areas with DecoFix Extra for joining.
Available on Special Order
Dimension: 2m (L) x30mm (H) x30mm (P)
Click to view product
Max column height 2345mm; Shaft diameter 300mm; Capital width 415mm; base width 430mm (see below for individual column components). Use with FDP700 if installed externally and finish with suitable exterior grade paint. (For a maintenance free external column, see KD9/10 below) ALSO AVAILABLE WITH A 2.4m CENTRAL SHAFT (= max colum height of 2.725m) - see KD9 below.
Our external range of products are manufactured and designed to be maintenance free for decades to come. As they can be more complicated to order please call us to discuss any installation issues or questions you may have on 02 9660 2177.
Due to the nature of these products, additional carriage charges will apply.
Dimension: 300mm shaft diameter
Large ionic full capital with two beautiful volutes called ram's horns. The design is thought to resemble a feminine hair style
Installation Guide.
Dimension: 16 x 45 x 45 cm
Click to view product
Half column kit (K3141, K2131 & K3001). Use flat against a wall, or in pairs to wrap around pipework, RSJ's etc. Max height 2370mm. Shaft dia (at base) 300mm. See also component dimensions below. External grade paint required if installed outside.
High octogonal foot for half columns.
Dimension: 57.5 x 22.5 x 45.5 - Ø 45.5 cm
Dimension: L 47 x H 3.5 x W 47 cm Purotouch® ‎
Click to view product
Cornice lighting trough ref C357 - mouse-over cornice image for product dimensions (cm's), and see light fitting options below.
Use Quick Links to the Accessories Menu to order adhesives.
See here for technical details and installation instructions
Indirect Lighting Brochure
Dimension: L: 200cm x H: 7.5 x W: 11cm
Decorative corbel B413 (click image for larger picture and dimensions). Install with Decofix Pro (from our Accessories section).
Dimension: 16cm (h) x 22.5cm (h) x 8.5cm (d)
Click to view product
Decorative corner block (used on architrave kits KX001 & KX003). Size 9.5cm x 9.5cm (projection = 3cm)
A practical and attractive flat over-door canopy with an authentic riven slate effect roof with scalloped or straight detail. Please call for further details. Features * Riven Slate top * Scalloped/straight edge * Variable sizes available * Optional leg brackets * Easy to fit
Dimension: projection: 680mm depth: 1830mm width: 220mm
Dimension: L 200 x H 2 x W 2 cm
Click to view product
Non Standard Sizes:
(Note BWO = Brick Work Opening)
- Overall width 1729mm to suit BWO 915mm
- Overall width 1806mm to suit BWO 991mm
- Overall width 1882mm to suit BWO 1068mm
- Overall width 1958mm to suit BWO 1144mm
- Overall width 2034mm to suit BWO 1220mm
Dimension: Standard width 1729mm BWO 915 mm
Click to view product
A simple cove with attractive 'cut-out' along the bottom length. 4.5cm x 4.5cm (click image for enlarged picture). Install with Decofix Pro (fixing adhesive/filler) and Extra Fix (for ultra high strength joint bonding). Match with CX126 coving, PX120 or PX113 dado rail, R08 ceiling rose and SX125 skirting board.
Use Quick Links to the Accessories Menu to order adhesives. Use only DecoHydro for fixing in wet areas with DecoFix Extra for joining.
Dimension: 2m (L) x45mm (H) x45mm (P)
Plain column shaft - K1 series. Height: 2010mm (excl capital & plinth), external dia 220mm
Large rounded corner to add an elegant finish to a wall frame.
Dimension: L 19 x H 2 x W 8.8 cm
Printed design width is 138 cm (54.3")
Fabric width = 145 cm (57 inches)
Weight = 400 gsm (11.8 oz/yard). Ideal for upholstery, blinds, making bags and other decorating projects.
Dimension: 145cm (W) x 1m
Click to view product
.jpg)
Dimension: L 200 x H 12 x W 3 cm
Click to view product
Set Half Column Doric plain high
| K1111 Capital | 30 x 18.5 x 36.5 - Ø 36.5 cm |
| K1101 Column | 201 x 11 x 22 - Ø 22 cm |
| K1131 Base | 57 x 17.5 x 35 - Ø 35 cm |
| Maximum Height | 288 cm |
Simple Doric half capital.
Simple Doric half capital.
High square socle pedestal for half columns.
Dimension: Max Height 288cm
Click to view product
Installation Guide
CATALOGUE
Dimension: Handle Set - BRS117R8
High quality foam cornice. Cheap as chips, no visible difference to plaster when installed. Installs in a fraction of the time. Perfect definition ready to paint.
Dimension: 200 x 7 x 7 cm
Beautiful and decadent, match with gold or gilt cornices, cornice also available in white. Synthetic, light-weight easily installed with adhesives.
Dimension: 40 cm diameter
Contact the artist, Sam Rey. Embroidered chair with mosaic legs.
Commissions accepted POA.
Skirting BI700 Silver Anodised Interlocking Aluminium H 7cm (also available in H 10cm)
This skirting anodised aluminium profile is easy to install and allows one to cover and protect low running cables over the perimeter providing an elegant finish to low wall corners. The internal interlocking support piece is fixed to the wall with screws or glued.
This profile is ideal for office environment or home for both aesthetic requirements and for telephone and computer wire passage.
| H=cm | Finish | Product Code |
| 7cm | Silver Anodised Alumimium | BI 700 ASN |
| 10cm | Silver Anodised Alumimium | bi 1000 ASN |
| Supports | BIS 20 ANF |
This anodised aluminium profiles has a silver coating. Good tolerance to oxidation and to mechanical impacts. Relevant pre-drilled interlock-pieces (2 pcs per meter) to be purchased separately, code BIS 20 ANF. Available junctions and end-plugs in synthetic resin Silver colour. This skirting board is also available powder coated with RAL colour reference.
This anodised aluminium profile has a silver coating. Good tolerance to oxidation and to mechanical impacts. Relevant pre-drilled interlock-pieces (2 pcs per meter) to be purchased separately, code BIS 20 ANF. Available junctions and end-plugs in synthetic resin Silver colour. This skirting board is also available powder coated with RAL colour reference.
Material: Extruded Anodised Aluminium
Colour: Silver
Length: 2.00 metres
End-caps, internal and external junctions in synthetic resin with the same Silver colour, to make proper and neat junctions. Available in 7cm height.
Material: Polypropylene
Colour: Silver
Height: 7cm
Dimension: 2.7metres L x (7cm H) & (10cm H)
Click to view product
.png)
With this modern profile, you can perfectly integrate indirect LED lighting into your interior.
Want to take it to the next level? Combine it with the other L3 profiles (C380, C381, C382) and create a sophisticated linear pattern of light and shadow.
Dimension: 200 x 14 x 5 cm
.png)
This design with its double expanding wave is by Ulf Moritz. Combine it horizontally one above the other or vertically alongside each other for an extraordinary silhouette.
PDF 3071
Dimension: L 200 x H 37.2 x W 7.6 cm
Small Corinthian capital for pilasters embellished with acanthus leaves and scrolls. Combine with K251
.png)
Dimension: L 22.8 x H 14.9 x W 6.2 cm
Valley is part of the 3D Wall Covering collection. Release your creativity and design a unique work of art that is a perfect fit for you and your interior. Play around with various shapes and use fun colour accents as a finishing touch. Designed by Orio Tonini. To cover 1 square meter you need 2 pieces.
Dimension: L 200 x H 25 x W 1.3 cm
.png)
Flexible version of the CX190. Subtle, impact-resistant U-shaped profile. Add ambience to your interior with indirect LED lighting. Designed by Orio Tonini. Thanks to its Flex technology, curved walls and surfaces a re no problem. Installation remark: It is necessary to screw this profile on the wall. Use an aluminum tape on the inside of the profile, or an aluminum LED support to avoid the light showing through the moulding. Flex Radius: R min = 30 cm, R* min = 130 cm
.png)
Dimension: L 200 x H 2 x W 3 cm
Click to view product
Dimensions: L260 x H9.5 x W4.5cm
Ledge Brochure
Installation Guide
Dimension: Dimensions: L260 x H9.5 x W4.5cm
Click to view product
SANITEC SB 18 Cove trim
Click to view product
Dimension: C220 L 200 x H 7.6 x W 11.6 cm
Max column height 2720mm; Shaft diameter 300mm; Capital width 415mm; base width 455mm (see below for individual column components). Use with FDP700 if installed externally and finish with suitable exterior grade paint. (For a maintenance free external column, see KD9/10 below). Our external range of products are manufactured and designed to be maintenance free for decades to come.
As they can be more complicated to order please call us to discuss any installation issues or questions you may have on 02 9660 2177.
Due to the nature of these products, additional carriage charges will apply.
Dimension: 300mm shaft diameter
High octogonal foot for full columns.
Please note columns, capitals and bases are made to order in Belgium, allow 8-10 weeks delivery for manufacture and sea freight. For more information please call 02 9700 7222.
Installation Guide.
Dimension: 57.5 x 45.5 x 45.5 - Ø 45.5 cm
Click to view product
Half column kit (K3141, K3151 & K3001). Use flat against a wall, or in pairs to wrap around pipework, RSJ's etc. Max height 2745mm. Shaft dia (at base) 300mm. See also component dimensions below. External grade paint required if installed outside.
Medium sized ceiling rose - click image for larger picture & application photo. Use Decofix Pro adhesive FDP500 to install. See also R23 and R52 ceiling roses.
Dimension: L 49 x H 4.7 x W 49 cm Purotouch® ‎
Click to view product
Flexible version of the PX120. Classic panel moulding with gentle curlicues. Thanks to its Flex technology, curved walls and surfaces are no problem. Installation remark: It is necessary to screw this profile on the wall. Flex Radius: R min = 30 cm, R* min = 110 cm
Dimension: L 200 x H 4 x W 1.9 cm
See below for matching corner element P4020A. Match with PX120 dado rail, C213, C217 coving and SX122 skirting board.
Available in flexible material, ideal for ceiling / wall borders.
Dimension: 2m (L) x 50mm (H) x 30mm (P)
Uplighter Coving C900 lighting trough - use lighting systems below for a beautiful creative warm glow on the ceiling - 2m lengths. Click here to see application as a 'normal' cornice (not uplighting). Match with C901, C902 coving, P8020, P8030 dado rail and SX118, SX156 skirting board.
See here for technical details and installation instructions
Indirect Lighting Brochure
Use Quick Links to the Accessories Menu to order adhesives.
Available on Special Order
Dimension: 2m (L) x 170mm (H) x 145mm (P)
Decorative corbel B414 (click image for larger picture and dimensions). Install with Decofix Pro adhesive (from our Accessories section).
Dimension: 10cm (w) x 22cm (h) x 7cm (d)
Click to view product
Corner block (used on architrave kits KX002 & KX004). Size 9.5cm x 9.5cm (projection = 3cm)
Gentle curlicues to fit any interior. This panel moulding's elegant design provides any space with refined allure.
.jpg)
Dimension: L 19 x H 1.7 x W 8.6 cm Duropolymer® ‎
Click to view product
A practical and attractive flat over-door canopy with an authentic riven slate effect roof with scalloped or straight detail. Please call for further details. Features * Riven Slate top * Scalloped/straight edge * Variable sizes available * Optional leg brackets * Easy to fit
Dimension: projection: 680mm depth: 2310mm width: 220mm
Our largest external cornice profile
Dimension: 2m (L) x 270mm (H) x 260mm (P)
Non Standard Sizes:
(Note BWO = Brick Work Opening)
- Overall width 1601mm to suit BWO 915mm
- Overall width 1678mm to suit BWO 991mm
- Overall width 1754mm to suit BWO 1068mm
- Overall width 1830mm to suit BWO 11144mm
- Overall width 1906mm to suit BWO 1220mm
Dimension: Standard width 1601mm BWO 915mm
Click to view product
Match with D300 architrave foot and the Byblos Arch Facia System. Flexible option available.
Use Quick Links to the Accessories Menu to order adhesives. Use only DecoHydro for fixing in wet areas with DecoFix Extra for joining.
Dimension: 2m (L) x 90mm (H) x 30mm (P)
Dimension: L 200 x H 3 x W 3 cm
Click to view product
Match with corner blocks P5020/A and P5020/B below, also matches with C402 coving. Also available in flexible material.
Dimension: 2m (L) x 90mm (H) x 15mm (P)
Printed design width is 138 cm (54.3")
Fabric width = 145 cm (57 inches)
Weight = 400 gsm (11.8 oz/yard). Ideal for upholstery, blinds, making bags and other decorating projects.
Dimension: 145cm (W) x 1m
Click to view product
Dimension: L 200 x H 9.1 x W 3 cm
Click to view product
Set Half Column Tuscan plain lowest.
| K311 Capital | 12.5 x 21 x 41.5 - Ø 41.5 cm |
| K3101 Column | 202 x 15 x 30.5 - Ø 30.5 cm |
| K2131 Pedestal | 20 x 21.5 x 43 - Ø 43 cm |
| Maximum Height | 234.5 cm |
Tuscan half capital.
Large tapered half shaft with top outline.
Tuscan pedestal for half columns with low rounded socle.
Dimension: Max Height 234.5 cm
Click to view product
See here for technical details and installation instructions
Indirect Lighting Brochure
PDF C900 Also available in .dwg or .dfx files
Dimension: 200 x 17 x 14.5 cm
Click to view product
Installation Guide
CATALOGUE
Dimension: Handle Set - BL117R8
High quality foam cornice. Cheap as chips, no visible difference to plaster when installed. Installs in a fraction of the time. Perfect definition ready to paint.
Dimension: 200 x 5 x 5 cm
Beautifully detailed ornate design in gold gilt, match with gilt cornices and corbels, also available in white.
Lightweight synthetic materials easily installed using adhesives.
Dimension: 40 cm diameter
Contact the artist, Sam Rey. Embroidered chair with mosaic legs.
Commissions accepted POA.
| H=cm | Finish | Product Code |
| 6cm | Silver Anodised Aluminium | BF 600 ASN |
Material: Extruded anodised aluminium
Colour: Silver
Length: 2.7 metres
BASE Height: 6cm
| H=cm | Finish | Product Code |
| 5.5cm | Silver Anodised Aluminium | BF 550 ASN |
Material: Extruded anodised aluminium
Colour: Silver
Length: 2.7 metres
TOP Height: 5.5cm
| H=cm | Finish | Product Code |
| 5.5cm | Powder Coated Matt White | BF 550 ASN |
Material: Extruded anodised aluminium
Colour: Powder Coated Matt White
Length: 2.7 metres
TOP Height: 5.5cm
| H=cm | Finish | Product Code |
| 5.5cm | Solid Wood - RON Natural Oak | BF 550 RON |
| 5.5CM | Solid Wood - RO Gloss Painted Oak | BF 550 RO |
Material: Solid Wood
Colour: RON Natural Oak
Colour: RO Gloss painted Oak
Length: 2.7 metres
TOP Height: 5.5cm
The finishing profile is available in three finishes to coordinate with any interior design, a powder coated finish to harmonize with the wall colour, anodised aluminium for a modern look or in an oak finish to complement floors and furniture.
The silver anodised aluminium BASE is installed at the same time as the wall finish to sit flush with the wall acting as the wall base and allowing the plasterworks to be neatly finished.
The TOP finishing profile is fixed once the floor and wall coverings have been fitted and allows for minor differences in floor height +/-2.5mm.
Ideal to finish spaces with a modern minimalist design.
Dimension: BASE 270 xcm L x 6cm H TOP 200cm x 5.5cm H
Click to view product
Flexible version of the SX104. Modern skirting board with linear pattern. The restrained design of this skirting board makes it suitable for a variety of decorating styles. Thanks to its Flex technology, curved walls and surfaces are no problem. Installation remark: It is necessary to screw this profile on the wall. Flex Radius: R min = 40 cm
.png)
Skirting Installation Guide
Browse our Catalogue
Duropolymer Data Sheet - our products are waterproof for indoor and exterior use
SX104F Technical Drawing
For more information call (09) 9097858 / 02108066077
Dimension: L 200 x H 14.8 x W 1.7 cm
.png)
Flexible version of the SX180. The pure shape and perfect proportions of the High Line skirting boards create an ideal transition between floor and wall. Thanks to its Flex technology, curved walls and surfaces are no problem. Installation remark: It is necessary to screw this profile on the wall. Flex Radius: R min = 45 cm
(1).png)
Installation Guide
Available in two sizes.
SX137F
L 200 x H 9.9 x W 1.5 cm Flex - Also available in rigid
.png)
SX137F
Installation Guide
Dimension: L 200 x H 13.8 x W 1.5 cm
Click to view product
Large Corinthian capital for pilasters embellished with acanthus leaves and scrolls.
Dimension: L 42.5 x H 35 x W 10.5 cm Purotouch® ‎
Flexible version of W109. Valley is part of the 3D Wall Covering collection. Release your creativity and design a unique work of art that is a perfect fit for you and your interior. Play around with various shapes and use fun colour accents as a finishing touch. Designed by Orio Tonini. To cover 1 square meter you need 2 pieces. Flex Radius: R min = 40 cm, R** min = 30 cm
Dimension: L 200 x H 25 x W 1.3 cm
CX216 Ledge is our most versatile L-shaped model to date: a cornice, curtain profile and light source all in one. Elegant, lightweight and quickly installed - Ledge is a subtle powerhouse for those who love sleek and smart design. Available in three different sizes.
Ledge Brochure
Installation Guide
Dimension: Dimensions: L260 x H12.5 x W4.5cm
SANITEC SB 12 Cove trim
SANITEC SB 12 profiles resolve wall-to-wall or wall-to-floor transitions. The cove-shaped profile is easy to clean and offers a hygienic solution to internal corners in kitchen countertops, shower stalls and bathtubs, replacing silicone caulking that inevitably yellows and absorbs dirt over time.
DATASHEET
Click to view product
Dimension: L 200 x H 2.9 x W 2.9 cm Purotouch® ‎
L 200 x H 4.3 x W 2.9 cm
.png)
Dimension: L 200 x H 4.3 x W 2.9 cm
Click to view product
Max column height 2870mm; Shaft diameter 220mm; Capital width 365mm; base width 350mm (see below for individual column components). Use with FDP700 if installed externally and finish with suitable exterior grade paint. Our external range of products are manufactured and designed to be maintenance free for decades to come.
As they can be more complicated to order please call us to discuss any installation issues or questions you may have on 02 9660 2177.
Due to the nature of these products, additional carriage charges will apply.
Dimension: 220mm shaft diameter
Half column kit (K1111, K1151 & K1101). Use flat against a wall, or in pairs to wrap around pipework, RSJ's etc. Max height 2430mm. Shaft dia (at base) 220mm. See also component dimensions below. External grade paint required if installed outside.
Classic recessed oval rosette with impressive carved foliage and flowers. Installation remark: It is necessary to screw this profile on the wall.
Dimension: 77.5 x H 3.6 x W 53 cm Purotouch® ‎
Click to view product
Modern skirting board with linear pattern. The restrained design of this skirting board makes it suitable for a variety of decorating styles.
Dimension: L 200 x H 14.8 x W 1.7 cm Duropolymer® ‎
Dimension: L 200 x H 9.1 x W 3 cm Flex ‎
Click to view product
T5 Fluroescent Tubes. This gorgeous combination of colour and light creates the perfect ambience to relax and shop surrounded with style.
This custom made circular lumiere is back lit with T5 fluroescent tubes available in 119cm and 59cm lengths. The edges of the lumiere are trimmed with flexible moulding C215F covered with light weight stretch material available in a multitude of colours. Acoustic materials available for use indoors for wet and dry areas.
Dimension: L 119cm
Matching corner element for dado P4020 (above)
Special delivery.
Dimension: 165mm(L) x70mm(H) x30mm (P)
Gentle curlicues to fit any interior. This panel moulding's elegant design provides any space with refined allure. Match with panel moulding P8030 and decorative corner elements P8030C.
Also available in a larger size perfect dado match for P8030 wall frames.
Dimension: L 13.2 x H 1.7 x W 13.2 cm Duropolymer®
Dimension: L 200 x H 4.7 x W 0.8 cm
Click to view product
Non standard sizes:
(Note BWO = Brick Work Opening)
- Overall width 1601mm to suit BWO 915mm
- Overall width 1678mm to suit BWO 991mm
- Overall width 1754mm to suit BWO 1068mm
- Overall width 1830mm to suit BWO 1144mm
- Overall width 1906mm to suit BWO 1220mm
Dimension: Standard Size W 1601mm BWO 915mm
Click to view product
Dentil coving (see also our C211 and C422 cornice patterns from our Luxxus range, as well as CX129 below). 12cm x 12cm (move over image for enlarged picture). Install with Decofix Pro (fixing adhesive/filler) and Extra Fix (for ultra high strength joint bonding). Available in 2m or 2.44m sections. Match with P6020 dado rail, R07, 08, 09 and 16 ceiling roses and SX137 skirting board.
Dimension: 2m (L) x120mm(H) x120mm(P)
.png)
Flexible version of the SX155. This restrained, timeless skirting board with a linear design is perfect for almost any interior. Thanks to its Flex technology, curved walls and surfaces are no problem. Designed by Xavier Donck. Installation remark: It is necessary to screw this profile on the wall. Flex Radius: R min = 30 cm
.png)
Installation Guide
PDF Drawing File
Dimension: L 200 x H 10.8 x W 2.5 cm
Click to view product
Click to view product
Flexible version of the P9050. Small panel moulding with a linear pattern for a subtle finishing touch. Thanks to its Flex technology, curved walls and surfaces are no problem. Installation remark: It is necessary to screw this profile on the wall. Flex Radius: R min = 20 cm, R* min = 60 cm
.png)
Dimension: L 200 x H 2.5 x W 1.3 cm
Set Half Column Tuscan plain high
| K3111 Capital | 12.5 x 21 x 41.5 - Ø 41.5 cm |
| K3101 Column | 202 x 15 x 30.5 - Ø 30.5 cm |
| k3151 Pedestal | 57.5 x 22.5 x 45.5 - Ø 45.5 cm |
| Maximum Height | 272 cm |
Tuscan half capital.
Large tapered half shaft with top outline.
High octogonal foot for half columns.
Dimension: Max Height 272 cm
Click to view product
Large Ovolo-inspired cornice moulding. Use this cornice moulding as an uplight to add immediate ambience to any space. Installation remark: It is necessary to screw this profile on the wall.
.png)
.jpg)
See here for technical details and installation instructions
Indirect Lighting Brochure
PDF C901 Also available in .dwg or .dfx files
Dimension: 200 x 15 x 12.5 cm
Click to view product
Installation Guide
CATALOGUE
Dimension: Handle Set - BSC117R8
High quality foam cornice. Cheap as chips, no visible difference to plaster when installed. Installs in a fraction of the time. Perfect definition ready to paint.
Dimension: 200 x 3.5 x 3.5 cm
Beautiful and decadent, match with gold or gilt cornices, cornice also available in white. Synthetic, light-weight easily installed with adhesives.
Dimension: 40 cm diameter
Contact the artist, Sam Rey. Beautifully finished decorative bowls.
Commissions accepted POA.
Full Column
Large tapered shaft.
Please note columns, capitals and bases are made to order in Belgium, allow 8-10 weeks delivery for manufacture and sea freight.
Installation Guide.
Dimension: 240 x 33.5 x 33.5 - Ø 33.5 cm
Click to view product
.png)
This simple flower completes your wall frame perfectly.
Dimension: L 6.1 x H 0.8 x W 6.1 cm
Dimensions: L260 x W5 x H15.5cmCX217 Ledge is our most versatile L-shaped model to date: a cornice, curtain profile and light source all in one. Elegant, lightweight and quickly installed - Ledge is a subtle powerhouse for those who love sleek and smart design. Available in three different sizes.
Dimension: Dimensions: L260 x W5 x H15.5cm
Click to view product
SANITEC RT cove-shaped profile
It is ideal for spaces in which frequent cleaning is required, offering a hygienic solution.
The profile is applied before laying the floor and wall covering, making it perfectly integrated into the surfaces.
Click to view product
.png)
Dimension: L 200 x H 8 x W 8 cm Purotouch® ‎
Panel moulding embellished with acanthus leaves and almonds. Combine it with P1020 for sophisticated wall frames. Use with panel moulding P1020
.png)
Dimension: L 24.5 x H 2.4 x W 24.5 cm Purotouch® ‎
Flexible version of the C333. Classic, elegant swan-neck cornice moulding. Thanks to its Flex technology, curved walls and surfaces are no problem. Installation remark: It is necessary to screw this profile on the wall. Flex Radius: R min = 300 cm
Flexible Installation Guide
Dimension: L 200 x H 12.2 x W 11.1 cm Flex ‎
Max column height 2335mm; Shaft diameter 300mm; Capital width 415mm; base width 430mm (see below for individual column components). Use with FDP700 if installed externally and finish with suitable exterior grade paint. (For a maintenance free external column, see KD9/10 below). Our external range of products are manufactured and designed to be maintenance free for decades to come.
As they can be more complicated to order please call us to discuss any installation issues or questions you may have on 02 9660 2177.
Due to the nature of these products, additional carriage charges will apply.
Dimension: 300mm shaft diameter
Half column kit (K1111, K1131 & K1101). Use flat against a wall, or in pairs to wrap around pipework, RSJ's etc. Max height 2705mm. Shaft dia (at base) 220mm. See also component dimensions below. External grade paint required if installed outside.
Segmented fluted half column. Add sections to vary height 5 x K4001+K4121(Base)+K4131(Capital) = 4.09metres (H). Price shown is for each half section.
Dimension: 72 x 17 x 34.5 - Ø 34.5 cm
The fine detailing of this ceiling ornament has a magnificent effect on your space. Installation remark: It is necessary to screw this profile on the wall.
Dimension: L 71 x H 4.4 x W 71 cm Purotouch® ‎
Click to view product
Flexible version of the PX144. Simple flat profile that gives both classic and modern interiors that little something extra. Thanks to its Flex technology, curved walls and surfaces are no problem. Installation remark: It is necessary to screw this profile on the wall. Flex Radius: R min = 20 cm, R* min = 220 cm
.png)
Dimension: L 200 x H 4.7 x W 0.8 cm
.png)
Xinnix recessed lighting fixture - for MycroLynx F7W or LED bulbs (not incl)
Dimension: 10 x 10 x 9cm
Decorative shelf corbel B417(click image for larger picture and dimensions). Install with Decofix Pro adhesive (from our Accessories section).
Dimension: 90.5cm (w) x 13.5cm (h) x 14cm (d)
Click to view product
Our fragmented panel moulding P4025 is unique in its design and fits our other Autoire profiles (W120, W121, C324). It is therefore perfectly fit to create your own custom made framework when already using our ready-made wall panels from the same collection (W120, W121).
.png)
Dimension: L 200 x H 8.3 x W 3.4 cm
Architrave 'foot' Architrave / byblos 'foot' Match with DX119, DX121 architrave, D200, D210 corner block and SX118 skirting board.
.png)
Dimension: L 200 x H 13.8 x W 1.8 cm Flex ‎
Click to view product
Flat cornice moulding used primarily as a border.
Dimension: L 200 x H 1.3 x W 3.9 cm
Dimension: 2m (L) x 50mm (H) x 25mm (P)
Click to view product
.png)
Produced to standard size to accommodate entrances from 914mm to 1439mm wide.
Supplied with Doric pilasters ref. D9.
Allow 8-12 weeks delivery freight not included request a quote.
Dimension: 2185 wide x 215 projection
Flexible version of the P9900. This stepped profile is a great way to provide depth to flat cornice mouldings. Thanks to its Flex technology, curved walls and surfaces are no problem. Installation remark: It is necessary to screw this profile on the wall. Flex Radius: R min = 20 cm, R* min = 250 cm
Dimension: L 200 x H 8 x W 1 cm Flex
Set Half Column Doric fluted low
| K1111 Capital | 30 x 18.5 x 36.5 - Ø 36.5 cm |
| K1001 Column | 200 x 11 x 22 - Ø 22 cm |
| K1151 Base | 12 x 16 x 32 - Ø 32 cm |
| Maximum Height | 242 cm |
Simple Doric half capital.
Half column fluted shaft.
Half Doric pedestal.
Dimension: Max Height 242 cm
Click to view product
L 200 x H 10.3 x W 10.3 cm
See here for technical details and installation instructions
Indirect Lighting Brochure
PDF C902 Also available in .dwg or .dfx files
FAQ
See here for technical details and installation instructions
PDF C902 Also available in .dwg or .dfx files please call 02 9700 7222
Dimension: 200 x 10.3 x 10.3 cm
Click to view product
Installation Guide
CATALOGUE
Dimension: Handle Set - IX117R8
Extra Large Coving.
Luxxus Range very large C-section profile - 160 x 215mm. Combine with P9900 panel mould to create intricate detailing.
Use Quick Links to the Accessories Menu to order adhesives.
Available on Special Order
Dimension: 2m x 215mm x 160mm
Multi-functional profile, skirting, arcitrave,cornice availabile in standard and flexible materials.
(1).png)
Also available in two other sizes.
(4).png)
SX162F (5).png)
SX163F
.png)
Installation of Flexible Profiles
PDF Drawing File
Dimension: 200 (L) x 6.5 (H) x 1.3(W) cm
Beautifully detailed ornate design in gold gilt, match with gilt cornices and corbels, also available in white.
Lightweight synthetic materials easily installed using adhesives.
Dimension: 40 cm diameter
Contact the artist, Sam Rey. Don't throw it away, transform into a statement of art!
Commissions accepted POA.
Segmented Column Tiers
3 Tiers
4 Tiers
5 Tiers
Dimension: 72 x 34.5 x 34.5 - Ø 34.5 cm
.png)
.png)
Skirting Installation Guide
Browse our Catalogue
Duropolymer Data Sheet - our products are waterproof for indoor and exterior use
SX105 Technical Drawing
For more information call (09) 9097858 / 02108066077
Dimension: L 200 x H 10.8 x W 1.3 cm
Click to view product
Flexible version of W110. 3D Wall Covering with repetitive design is trending, it adds extra design and dimension to your space and creates a wide range of opportunities to personalise your interior. The W110 Hill profiles, designed by Orio Tonini, are easy to install and are made from sustainable materials. In addition, they have proven positive thermal and acoustic properties. To cover 1 square meter you need 2 pieces. Flex Radius: R min = 40 cm, R** min = 30 cm
.png)
.png)
.jpg)
Dimension: L 200 x H 25 x W 1.6 cm
SANITEC RS Cove trim
.png)
ACCESSORIES
Click to view product
Classic panel moulding with gentle curlicues. Can also be used for a nice finish at the bottom of a skirting board. Complements PX103.
.jpg)
Dimension: L 19 x H 1.5 x W 3.5 cm Duropolymer® ‎
Panel moulding embellished with acanthus leaves and almonds. This profile provides some nice detail and is suitable for use in both classic and modern interiors. Combine it with P101A.
(1).png)
.jpg)
Dimension: L 200 x H 4.9 x W 2.4 cm
Flexible version of the C334. Classic, elegant swan-neck cornice moulding. Thanks to its Flex technology, curved walls and surfaces are no problem. Installation remark: It is necessary to screw this profile on the wall. Flex Radius: R min = 380 cm
Flexible Installation Guide
Dimension: L 200 x H 15 x W 19.5 cm Flex ‎
Click to view product
Max column height 2710mm; Shaft diameter 300mm; Capital width 415mm; base width 455mm (see below for individual column components). Use with FDP700 if installed externally and finish with suitable exterior grade paint. (For a maintenance free external column, see KD9/10 below). Column K3002, Base K3152, Capital K3112. Our external range of products are manufactured and designed to be maintenance free for decades to come.
As they can be more complicated to order please call us to discuss any installation issues or questions you may have on 02 9660 2177.
Due to the nature of these products, additional carriage charges will apply.
Dimension: 300mm shaft diameter
Half column kit (K3111, K2131 & K3101). Use flat against a wall, or in pairs to wrap around pipework, RSJ's etc. Max height 2345mm. Shaft dia (at base) 300mm. See also component dimensions below. External grade paint required if installed outside.
Base for segmented fluted half column. Add sections K4001 to vary height.
Dimension: 40.5 x 23.5 x 46.5 - Ø 46.5 cm
.png)
.png)
Dimension: L 79 x H 6 x W 79 cm Purotouch® ‎
Click to view product
Match with corner blocks P5020/A and P5020/B below, also matches with C402 coving.
Also available in flexible material.
Dimension: 2m (L) x 90mm (H) x 15mm (P)
Dimension: L 200 x H 1.6 x W 1.6 cm Purotouch® ‎
Flat cornice moulding used primarily as a border.
.png)
.png)
Dimension: L 200 x H 1.3 x W 6.9 cm Duropolymer® ‎
.jpg)
Long corner block for use at the bottom of a door casing (plinth).
.png)
Dimension: L 13.6 x H 2.7 x W 24.8 cm
Large recessed niche with opaque base for installing light (not included), highlighting item on display Max dimensions: 69cm (w), 113cm (h)
Use Quick Links to the Accessories Menu to order adhesives. Use only DecoHydro for fixing in wet areas with DecoFix Extra for joining.
Simple, multifunctional profile. A perfect way to conceal cables or other imperfections.
Dimension: L 200 x H 2.4 x W 3 cm
The W111 BAR is the straightforward addition to ZIGZAG, VALLEY and HILL profiles. Designed to fit perfectly with CX190 and SX194 it offers endless possibilities and fast finishing. Cover wall sections from top to bottom to add give an immediate wow effect to any room or use.
(1).png){kind=small}
Dimension: L 200 x H 25 x W 2 cm Purotouch® ‎
Flexible version of the SX162. Our simplest panel moulding is part of the SQUARE family. Use this multifunctional profile to fit your entire home with the same moulding. All you need to do is select the correct size to fit your space. Installation remark: It is necessary to screw this profile on the wall. Flex Radius: R min = 20 cm, R* min = 80 cm
.png)
Available in other sizes ...
.png)
SX157F .png)
SX163F
Dimension: L 200 x H 4 x W 1 cm Flex
Classic panel moulding with gentle curlicues. Can also be used for a nice finish at the bottom of a skirting board. Installation remark: It is necessary to screw this profile on the wall. Flex Radius: R min = 20 cm, R* min = 80 cm
.png)
Available in ....
.png)
Dimension: L 200 x H 2.5 x W 1.2 cm
Set Half Column Doric fluted high
| K1111 Capital | 30 x 18.5 x 36.5 - Ø 36.5 cm |
| K1001 Column | 200 x 11 x 22 - Ø 22 cm |
| K1131 Base | 57 x 17.5 x 35 - Ø 35 cm |
| Maximum Height | 287 cm |
Simple Doric half capital.
Half column fluted shaft.
High square socle pedestal for half columns.
Dimension: Max Height 287 cm
Click to view product
Installation Guide
CATALOGUE
Dimension: Handle Set - BSC204R8
Beautifully detailed ornate design in gold gilt, match with gilt cornices and corbels, also available in white.
Lightweight synthetic materials easily installed using adhesives.
Dimension: 40 cm diameter
Contact the artist, Sam Rey. Decorative mosaic chest.
Commissions accepted POA.
.png)
.png)
.png)
Flexible version of the SX105. Contemporary skirting board with grooves. The restrained design creates an elegant transition between the floor and the wall. Thanks to its Flex technology, curved walls and surfaces are no problem. Installation remark: It is necessary to screw this profile on the wall. Flex Radius: R min = 30 cm
Dimension: L 200 x H 10.8 x W 1.3 cm
INTERJOLLY IJ connecting trims between the walls and the bath or shower trays.
Stainless Steel Steel profiles are made by cold forming sheets of constant thickness, thus differing from the corresponding alu minum and brass versions made by hot extrusion, while maintaining their application and dimensional char acteristics. Stainless steel effectively resists high mechanical stress and is particularly suitable for use in the chemical, food, and hospital sectors, where hygiene, durability, and chemical resistance are essential. Normally pro duced with a semi-gloss finish, a brushed finish can also be achieved by partially removing material using rotating nylon and quartz fiber brushes. This process gives the surface a matte appearance without altering its characteristics. AISI 304 STAINLESS STEEL - EN X 5 CrNi 18 10 - DIN 1.4301: This steel belongs to the AUSTENITIC category and is the most widespread and commonly used alloy for products requiring high technical and performance characteristics. It is highly resistant to most chemical agents but may stain or darken superficially; a standard polishing product is sufficient to restore its original appearance.
PVC RESINTOP Rigid thermoplastic synthetic resin: This material is specifically formulated to optimize the performance of rigid profiles intended for permanent indoor and outdoor applications, where both aesthetic and durability requirements must be met. Produced from primary resin with a Polyvinyl Chloride (PVC)-based composition, it is suitable for a wide range of uses at temperatures up to +60°C. The selected raw material ensures excellent resistance to UV rays, limited mechanical impacts, and strong protection against the stagnation of fungi and bacteria.
DATA SHEET
Click to view product
Horizontal profile to finish wainscoting with PX147. Complete with a skirting board for the perfect finish.
Dimension: L 200 x H 5.5 x W 3.4 cm Duropolymer® ‎
Segmented column system - priced for 3 segments (extra segments K4002 can be added) - see individual components below for specification. Column shaft dia 345mm. Use adhesive FDP500 (x1) for indoor application, or FDP700 (x1) for external use.
Base, K4132, Capital K4122. Our external range of products are manufactured and designed to be maintenance free for decades to come.
As they can be more complicated to order please call us to discuss any installation issues or questions you may have on 02 9660 2177.
Due to the nature of these products, additional carriage charges will apply.
Half column kit (K3111, K3151 & K3101). Use flat against a wall, or in pairs to wrap around pipework, RSJ's etc. Max height 2720mm. Shaft dia (at base) 300mm. See also component dimensions below. External grade paint required if installed outside.
Capital for fluted segmented half column. Add or remove sections to vary height.
Dimension: 21.5 x 24 x 48.5 - Ø 48.5 cm
.png)
Dimension: L 75 x H 4.5 x W 75 cm Purotouch® ‎
Click to view product
.jpg)
Xinnix recessed fixture for energy saving light (not incl)
Photo Gallery
Ask a question
Dimension: 19.5 x 34 x 8.5cm
Xinnix recessed fixture for energy saving light (not incl)
Dimension: 19.5 x 34 x 8.5cm
Matching corner element for P5020 (above)
Not currently in stock. Non-stock orders allow 15 days delivery, airfreight will incur additional costs, please call to arrange a no obligation quote 02 9660 2177 or arrange a special delivery.
Dimension: 90mm x 90mm x 15mm
.png)
Dimension: L 200 x H 4.1 x W 4.8 cm ‎
(4).png)
.png)
Dimension: L 200 x H 6.6 x W 1.3 cm
Click to view product
Medium/large ornate ceiling rose. Click on image for larger picture. Use Decofix Pro adhesive FDP500 to install. Match with skirting SX118.
Available on Special Order
Use Quick Links to the Accessories Menu to order adhesives. Use only DecoHydro for fixing in wet areas with DecoFix Extra for joining.
Dimension: 65.5cm diameter
.png)
This XL profile has been created as part of The Cotswold’s family to fit into grand projects and spaces. The big brother of C321.
Flexible Installation Guide
Dimension: 200 x 14 x 6 cm
Click to view product
Flexible version of the C333. Classic, elegant swan-neck cornice moulding. Thanks to its Flex technology, curved walls and surfaces are no problem. Installation remark: It is necessary to screw this profile on the wall. Flex Radius: R min = 300 cm
.png)
.jpg)
Dimension: L 200 x H 12.2 x W 11.1 cm Flex ‎
Flexible version of the PX120. Classic panel moulding with gentle curlicues. Thanks to its Flex technology, curved walls and surfaces are no problem. Installation remark: It is necessary to screw this profile on the wall. Flex Radius: R min = 30 cm, R* min = 110 cm
.png)
Also available in ...
.png)
Dimension: 200 x H 4 x W 1.9 cm
Set Half Column Tuscan fluted low
| K3111 Capital | 12.5 x 21 x 41.5 - Ø 41.5 cm |
| K3001 Column | 201 x 15.3 x 30.5 - Ø 30.5 cm |
| K2131 Pedestal | 20 x 21.5 x 43 - Ø 43 cm |
| Maximum Height | 223.5cm |
Tuscan half capital.
Fluted half column.
Tuscan pedestal for half columns with low rounded socle.
Dimension: Max Height 223.5 cm
Click to view product
Installation Guide
CATALOGUE
Dimension: Handle Set - IX204R8
Beautifully detailed ornate design in gold gilt, match with gilt cornices and corbels, also available in white.
Lightweight synthetic materials easily installed using adhesives.
Dimension: 40 cm diameter
Contact the artist, Sam Rey. Sam's innovation does not stop, stones, old concrete is miraculously transformed into beautiful garden art.
Commissions accepted POA.
Capital for segmented columns fit with K4002
3 Tiers
4 Tiers
5 Tiers
Dimension: 21.5 x 48.5 x 48.5 - Ø 48.5 cm
Click to view product
Flexible version of the SX163. Our simplest skirting board is part of the SQUARE family. Thanks to its Flex technology, curved walls and surfaces are no problem. Installation remark: It is necessary to screw this profile on the wall. Flex Radius: R min = 35 cm
.png)
Kelle M - Yes, did the installation all by myself. It was really easy. All I needed was a Stanley knife and a caulking gun.
Installation Guide
Available in three sizes.
(3).png)
SX162FSX157F
Dimension: L 200 x H 10.2 x W 1.3 cm
Click to view product
.png)
.jpg)
.png)
Larger version of our very popular CX100 cove. 9.5cm x 9.5cm (click image for enlarged picture). Install with Decofix Pro (fixing adhesive/filler) and Extra Fix (for ultra high strength joint bonding). Match with CX128 coving, PX120 or PX113 dado rail, R09 ceiling rose and SX137/SX138 skirting board.
100% recyclable, impact and water resistant, great for bathrooms and wet areas.
Use Quick Links to the Accessories Menu to order adhesives. Use only DecoHydro for fixing in wet areas with DecoFix Extra for joining.
NEW! Now available in flexible profiles.
Dimension: 2m (L) x95mm (H) x95mm (P)
Click to view product
Add subtle sophistication to your space with this classic, elegantly curved panel moulding. Complete the space with other products from the HERITAGE family.
.png)
.jpg)
Dimension: L 200 x H 5 x W 1.7 cm
Flexible version of the C373. Add ambiance to your space with this modern lighting profile by Ulf Moritz. Thanks to its Flex technology, curved walls and surfaces are no problem. Installation remark: It is necessary to screw this profile on the wall. Flex Radius: R min = 100 cm
Flexible Installation Guide
.png)
Dimension: L 200 x H 8 x W 5 cm Flex
Click to view product
Max column height 2425mm. Column diameter 220mm. Column comprises of K1122, K1152 & K1102 - see individual components below for 3D image and specification. Use with FDP700 if installed externally. Our external range of products are manufactured and designed to be maintenance free for decades to come.
As they can be more complicated to order please call us to discuss any installation issues or questions you may have on 02 9660 2177.
Due to the nature of these products, additional carriage charges will apply.
Dimension: 220mm shaft diameter
Half column kit (K1111, K1151 & K1001). Use flat against a wall, or in pairs to wrap around pipework, RSJ's etc. Max height 2420mm. Shaft dia (at base) 220mm. See also component dimensions below. External grade paint required if installed outside.
Medium-sized rosette with classic ornamentation and room to conceal cables.
Dimension: L 38.5 x H 2.7 x W 38.5 cm Purotouch® ‎
Click to view product
Match with P5050, dado rail C352, C353, C354, C356 coving and SX155 skirting board. Also available in flexible material.
Dimension: 2m (L) x 30mm (H) x 10mm (P)
This simple skirting board has a slight angle and fits any interior. This multifunctional moulding creates a seamless transition betweens walls and doors, windows and even ceilings.
.png)
.png)
Dimension: L 200 x H 6 x W 1.2 cm
Aesthetic and functional. Match cornice C240 with skirting SX104. Imact and water resistant, great for bathrooms and wet areas.
Use Quick Links to the Accessories Menu to order adhesives. Use only DecoHydro for fixing in wet areas with DecoFix Extra for joining.
Dimension: 200 x 15 x 1.5cm
Rounded panel moulding with an organic acanthus leaf design. Combine it with P3020A for a wall frame full of character.
.png)
.jpg)
Dimension: L 200 x H 6.1 x W 3.2 cm
Dimension: 1m (L) x 150 cm (W)
Click to view product
Dimension: L 200 x H 4.7 x W 0.8 cm
Click to view product
Flexible version of the SX163. Our simplest panel moulding is part of the SQUARE family. Thanks to its Flex technology, curved walls and surfaces are no problem. Installation remark: It is necessary to screw this profile on the wall. Flex Radius: R min = 35
Dimension: L 200 x H 10.2 x W 1.3 cm Flex ‎
Half column kit (K1141, K1151 & K1101). Use flat against a wall, or in pairs to wrap around pipework, RSJ's etc. Max height 2255mm. Shaft dia (at base) 220mm. See also component dimensions below. External grade paint required if installed outside.
Dimension: Max Height 2255mm Shaft diameter 220mm
Set Half Column Tuscan fluted high
| K3111 Capital | 12.5 x 21 x 41.5 - Ø 41.5 cm |
| K3001 Column | 201 x 15.3 x 30.5 - Ø 30.5 cm |
| K3151 Pedestal |
57.5 x 22.5 x 45.5 - Ø 45.5 cm
|
| Maximum Height | 271 cm |
Tuscan half capital.
Fluted column.
High octogonal foot for half columns.
Dimension: Max Height 271 cm
Click to view product
Flexible version of the SX165. Elegant, classic skirting board from the CONTOUR family which combines a minimalist design with gentle curlicues. Thanks to its Flex technology, curved walls and surfaces are no problem. Installation remark: It is necessary to screw this profile on the wall. Flex Radius: R min = 40 cm
PDF Drawing File
Also available in 2 other sizes.
.png)
SX173F .png)
SX118F
Dimension: L 200 x H 6.9 x W 1.1 cm Flex ‎
Beautiful and decadent, match with gold or gilt cornices, cornice also available in white. Synthetic, light-weight easily installed with adhesives.
Dimension: 47cm diameter
Contact the artist, Sam Rey. Italian commission by the artist, fire surround and floors.
Commissions accepted POA.
K1122 (Capital) + K1102 (Column)+ K1152 (Base)
Please note columns, capitals and bases are made to order in Belgium, allow 8-10 weeks delivery for manufacture and sea freight. Please call for more information 02 9700 7222
Installation Guide.
Dimension: Hmax/min = 2.425m
Click to view product
NEW - Product finished with RAL9003 Signal white. It is not necessary to repaint this profile after installation. This classic skirting board is part of the CONTOUR family. To create a consistent look for the entire dwelling, we provide the same design in various sizes.
.png)
.png)
Skirting Installation Guide
Browse our Catalogue
Duropolymer Data Sheet - our products are waterproof for indoor and exterior use
SX118-RAL9003 Technical Drawing
For more information call (09) 9097858 / 02108066077
Dimension: L 200 x H 13.8 x W 1.8 cm
Click to view product
W112 RIDGE and W113 COBBLE’s unique feature is the texture on the structure. Moving closer or further creates an intriguing light & shadow effect that instantly transforms any interior. Designed to perfectly with CX190 and SX194 it offers endless possibilities and fast finishing.
Dimension: L 200 x H 25 x W 1.9 cm
.png)
Innovative 3-in-1 system Designed to complete installations of different heights with one single product
Uptec is a universal, adjustable pedestal for outdoor raised floor installations, specifically indicated for 2 cm - 3/4” ceramic tile. Uptec launches the 3-in-1 revolution, 3 articles (3 base codes: SUPAL, SUPAS and SUPAR) in only one system. The three products work seamlessly with 3 accessories (3 codes: SUPA2, SUPA4 and SUPAW) designed for standard installations (2 mm - 3/32” and 4 mm - 5/32”tile joints) or for wood and aluminum joists. The rubber, interchangeable accessories guarantee a sound dampening, non-slip system. Uptec allows you to reach the desired floor height by simply adding SUPAR spacer rings; an ingenuous locking disc lets you easily change from a self-leveling head to a fixed head. Simple mechanism to change from a self-leveling head to a fixed head.
Raised outdoor floor: how to make it?
Advantages of UPTEC self-leveling version of the pedestal
Whats the maximum installation height of pedestals for raised floors?
Planning
.jpg)
DESIGN YOUR RAISED FLOOR!
A new platform at your disposal to find out which and how many items are needed for the realisation of your project.
Create a login for the UPTEC PLANNER then load your project plans, for additional help contact Customer Service.
Click to view product
Dimension: L 200 x H 14.4 x W 6.5 cm
Egg and dart coving/cornice. Larger version of CX101. 9.5cm x 9.5cm (move over image for enlarged picture). Install with Decofix Pro (fixing adhesive/filler) and Extra Fix (for ultra high strength joint bonding). Match with CX129 coving, PX120, PX114 dado rail, R77 ceiling rose and SX137 skirting board.
100% recyclable, impact and water resistant, great for bathrooms and wet areas.
Use Quick Links to the Accessories Menu to order adhesives. Use only DecoHydro for fixing in wet areas with DecoFix Extra for joining.
Dimension: 2m (L) x95mm (H) x95mm (P)
Click to view product
lexible version of the PX175. Add subtle sophistication to your space with this classic, elegantly curved panel moulding. Thanks to its Flex technology, curved walls and surfaces are no problem. Installation remark: It is necessary to screw this profile on the wall. Flex Radius: R min = 30 cm, R* min = 80 cm
Dimension: L 200 x H 5 x W 1.7 cm
.png)
Flexible version of the C901. Large Ovolo-inspired cornice moulding. Thanks to its Flex technology, curved walls and surfaces are no problem. Installation remark: It is necessary to screw this profile on the wall. Flex Radius: R min = 600 cm
Flexible Installation Guide
Dimension: L 200 x H 14.8 x W 12.4 cm Flex
Click to view product
Max column height 2875mm. Column diameter 220mm. Column comprises of K1122, K1132 & K1102 - see individual components below for 3D image and specification. Use with FDP700 if installed externally. Our external range of products are manufactured and designed to be maintenance free for decades to come.
As they can be more complicated to order please call us to discuss any installation issues or questions you may have on 02 9660 2177.
Due to the nature of these products, additional carriage charges will apply.
Dimension: 220mm shaft diameter
Corinthian Fluted Column
Max column height 2415mm. Column diameter 220mm.
Column comprises of K1122 (Capital) , K1152 (Base) & K1002 (Column) - see individual components below for 3D image and specification. Use with FDP700 if installed externally. Our external range of products are manufactured and designed to be maintenance free for decades to come.
Dimension: Hmax/min 2.415m
Half column kit (K1111, K1131 & K1001). Use flat against a wall, or in pairs to wrap around pipework, RSJ's etc. Max height 2870mm. Shaft dia (at base) 220mm. See also component dimensions below. External grade paint required if installed outside.
.png)
A beautiful sea shell to create a southern atmosphere. All fittings & instructions included.
Dimension: 22 x 16 x 35 cm
Can also be installed "upside down" Match with P5051 dado rail, C351 coving and SX118, SX156 skirting board.
Dimension: 2m (L) x 20mm (H) x 15mm (P)
Joining piece 12/7 x 14.5 x 6cm. Can be used with D400 and D401. Match with C217 coving, R76 ceiling rose and SX105, SX155 skirting board.
Very large C-section profile - 160 x 215mm. Combine with P9900 panel mould to create intricate detailing.
Use Quick Links to the Accessories Menu to order adhesives.
Available on Special Order
Dimension: 2m (L) x 215mm (H) x 160mm (P)
Supplied pre-primed ready to paint - install with Decofix Pro FDP500 adhesive / filler. Suitable for hiding electrical cables (max 8mm) in cavity space at wall side of skirting.
Use Quick Links to the Accessories Menu to order adhesives. Use only DecoHydro for fixing in wet areas with DecoFix Extra for joining.
Dimension: Height 15cm, projection 1.6cm, length 2m
.png)
.png)
Dimension: L 200 x H 4 x W 1 cm
Click to view product
Installation Guide Flexible Moldings
.png)
Dimension: L 200 x H 14.1 x W 6.4 cm Flex ‎
Click to view product
Dimension: 1m (L) x 150 cm (W)
Click to view product
Flexible version of the PX175. Add subtle sophistication to your space with this classic, elegantly curved panel moulding. Thanks to its Flex technology, curved walls and surfaces are no problem. Installation remark: It is necessary to screw this profile on the wall. Flex Radius: R min = 30 cm, R* min = 80 cm
Dimension: L 200 x H 5 x W 1.7 cm
Half column kit (K1141, K1131 & K1101). Use flat against a wall, or in pairs to wrap around pipework, RSJ's etc. Max height 2705mm. Shaft dia (at base) 220mm. See also component dimensions below. External grade paint required if installed outside.
Dimension: Max Height 2705mm Shaft diamter 220mm
Set Half Column Tuscan plain low.
| K3111 Capital | 12.5 x 21 x 41.5 - Ø 41.5 cm |
| K3201 Column | 240 x 16.5 x 33.5 - Ø 33.5 cm |
| K2131 Pedestal |
20 x 21.5 x 43 - Ø 43 cm
|
| Maximum Height | 272.5 cm |
Tuscan half capital.
Plain tapered half column.
Tuscan pedestal for half columns with low rounded socle.
Dimension: Max Height 272.5 cm
Click to view product
Beautifully detailed ornate design in gold gilt, match with gilt cornices and corbels, also available in white.
Lightweight synthetic materials easily installed using adhesives.
Dimension: 47cm diameter
Contact the artist, Sam Rey. Recycled cupboard decorated with mosaic top and feet.
Commissions accepted POA.
This classic skirting board is part of the CONTOUR family. To create a consistent look for the entire dwelling, we provide the same design in various sizes.
.png)
Skirting Installation Guide
Browse our Catalogue
Duropolymer Data Sheet - our products are waterproof for indoor and exterior use
SX118 Technical Drawing
For more information call (09) 9097858 / 02108066077
Available in two more sizes . . .
.png)
Dimension: L 200 x H 13.8 x W 1.8 cm
.png)
Flexible version of the SX172. This elegant, timeless design fits any interior. Thanks to its Flex technology, curved walls and surfaces are no problem. Installation remark: It is necessary to screw this profile on the wall. Flex Radius: R min = 35 cm
.png)
Dimension: L 200 x H 8.5 x W 1.4 cm
Click to view product
Dimension: L 200 x H 5 x W 2.9 cm
Dimension: L 200 x H 25 x W 2.2 cm
Click to view product
.jpg)
Dimension: L 200 x H 11.3 x W 4 cm Duropolymer® ‎
Click to view product
SUPAS – Standard pedestal for raised floors
DATA SHEET
.jpg)
Installation Video Standard Floor
Dimension: 43 - 58mm
Click to view product
.png)
Match with PX120/A corner piece, CX100 coving, R07 ceiling rose and SX122 skirting board.
Dimension: L2m x H40mm x W20mm
Dentil style coving, slightly smaller than our CX107 cove. 9.5cm x 9.5cm (move over image for enlarged picture). Install with Decofix Pro (fixing adhesive/filler) and Extra Fix (for ultra high strength joint bonding). Match with CX107 coving, P6020, PX114 dado rail, R16 ceiling rose and SX137 skirting board.
100% recyclable, impact and water resistant, great for bathrooms and wet areas.
Use Quick Links to the Accessories Menu to order adhesives. Use only DecoHydro for fixing in wet areas with DecoFix Extra for joining.
Available on Special Order
Dimension: 2m/2.4m (L) x95mm (H) x95mm (P)
Click to view product
Flexible version of the C341. A stately classic cornice moulding inspired by the rich heritage of English country homes. Thanks to its Flex technology, curved walls and surfaces are no problem. Installation remark: It is necessary to screw this profile on the wall. Flex Radius: R min = 400 cm
Flexible Installation Guide
Dimension: L 200 x H 8.8 x W 12.2 cm Flex
Click to view product
Set Full Column Corinthian fluted high
Please note columns, capitals and bases are made to order in Belgium, allow 8-10 weeks delivery for manufacture and sea freight. Please call for more information 02 9700 7222
Installation Guide.
Dimension: Hmax = 2.865m / Hmin = 2.505m
Click to view product
Max column height 2865mm. Column diameter 220mm. Column comprises of K1122, K1132 & K1002 - see individual components below for 3D image and specification. Use with FDP700 if installed externally. Our external range of products are manufactured and designed to be maintenance free for decades to come.
As they can be more complicated to order please call us to discuss any installation issues or questions you may have on 02 9660 2177.
Due to the nature of these products, additional carriage charges will apply.
Dimension: 220mm shaft diameter
Half column kit (K3111, K2131 & K3001). Use flat against a wall, or in pairs to wrap around pipework, RSJ's etc. Max height 2335mm. Shaft dia (at base) 300mm. See also component dimensions below. External grade paint required if installed outside.
Large rosette with concentric circles. Can be used to conceal cables. Installation remark: It is necessary to screw this profile on the wall.
Installation Guide Ceiling Roses
Dimension: L 74.5 x H 3.1 x W 74.5 cm Purotouch® ‎
Click to view product
Flexible version of the SX118. This classic skirting board is part of the CONTOUR family. Thanks to its Flex technology, curved walls and surfaces are no problem. Installation remark: It is necessary to screw this profile on the wall. Flex Radius: R min = 40 cm
Skirting Installation Guide
Browse our Catalogue
Duropolymer Data Sheet - our products are waterproof for indoor and exterior use
SX118 Technical Drawing
For more information call (09) 9097858 / 0218066077
Flexible available in two more sizes ...
Dimension: L 200 x H 13.8 x W 1.8 cm Flex ‎
Can also be installed "upside down". Match with C356 coving, C352 Uplighting cornice, P5050 dado rail and SX105 skirting board.
Dimension: 2m (L) x 85mm (H) x 15mm (P)
Flexible Installation Guide
Dimension: L 200 x H 10.3 x W 10.3 cm Flex
Click to view product
Orac Decor C219 - Large "country mansion" style cornice. Match with C307 coving, P3020 or P8050 dado rail, R17 ceiling rose and SX118, SX156 skirting board.
Use Quick Links to the Accessories Menu to order adhesives.
Available on Special Order
Dimension: 2m (L) x 175mm (H) x 130mm (P)
Use Quick Links to the Accessories Menu to order adhesives. Use only DecoHydro for fixing in wet areas with DecoFix Extra for joining.
Available on Special Order
Dimension: 19.5 x 34 x 8.5cm
Dimension: 1m (L) x 150 cm (W)
Click to view product
Flexible version of the SX173. Elegant, classic skirting board from the CONTOUR family which combines a minimalist design with gentle curlicues. Thanks to its Flex technology, curved walls and surfaces are no problem. Installation remark: It is necessary to screw this profile on the wall. Flex Radius: R min = 45 cm
Available in two other sizes ...
.png)
SX165F .png)
SX118F
Dimension: L 200 x H 10 x W 1.6 cm
Dimension: Max Height 2380mm Shaft dai.Base 300mm
Click to view product
Set Half Column Tuscan plain highest.
| K3111 | 12.5 x 21 x 41.5 - Ø 41.5 cm |
| K3201 | 240 x 16.5 x 33.5 - Ø 33.5 cm |
| K3151 | 57.5 x 22.5 x 45.5 - Ø 45.5 cm |
| Maximum Height | 310 cm |
Tuscan half capital.
Plain tapered column.
High octogonal foot for half columns.
Dimension: Max Height 310 cm
Click to view product
Beautifully detailed ornate design in gold gilt, match with gilt cornices and corbels, also available in white.
Lightweight synthetic materials easily installed using adhesives.
Dimension: 34 cm diameter
Contact the artist, Sam Rey. Italian commission by the artist, fire surround and floors.
Commissions accepted POA.
.png)
.png){kind=small}
.jpg)
Dimension: L 200 x H 15.1 x W 1.4 cm
Click to view product
Rounded corner for panel moulding P4020 to create lovely wall frames.
.png)
Dimension: L 16.4 x H 2.9 x W 9.1 cm
The W120 Wall Panel is unique: a ready-made wall panel with a lot of detail for easy, fast and beautifully finished installation. It is an economical solution for wall depth creation and can be made even more dynamic by filling it up with our insert W122 and/or W123.
.png)
Dimension: L 150 x H 3.2 x W 50 cm
ased on the iconic CX190 U-profile, the U-STEPS take on different shapes with ease. With a limited number of decorative mouldings, you can bring walls and entire interiors to life. The results are always unique. Designed by Orio Tonini
Indirect Lighting Installation Guide
.png)
Dimension: L 200 x H 11.3 x W 4 cm
Flexible version of PX209. PX209 RIBBON is the perfect new rounded trim for your walls and all of our 3D wall covering panels. Bypass joints with this elegant in-between profile that is a great transition on the wall between panels. Or use it as a slim and refined panel mould, it can perfectly hold its own on the wall. Designed by Orio Tonini.
Dimension: Dimensions: 200 x 1 x 1.8cm
.png)
Large rounded corner to add an elegant finish to a wall frame.
Dimension: L 19 x H 2 x W 8.8 cm Duropolymer® ‎
Twisted rope style coving. 7cm x 7cm (move over image for enlarged picture). Install with Decofix Pro (fixing adhesive/filler) and Extra Fix (for ultra high strength joint bonding). 2m lengths only. Match with PX130, PX131 dado rail, R09 ceiling rose and SX122 skirting board.
100% recyclable, impact and water resistant, great for bathrooms and wet areas.
Use Quick Links to the Accessories Menu to order adhesives. Use only DecoHydro for fixing in wet areas with DecoFix Extra for joining.
Available on Special Order
Dimension: 2m (L) x70mm (H) x70mm (P)
Click to view product
Rounded corner for panel moulding P8020 to create lovely wall frames. Use with panel moulding P8020
(1).png)
Dimension: L 19.8 x H 2.6 x W 11 cm
Flexible version of the CX100. Timeless cornice moulding that combines easily with a variety of decorating styles. Thanks to its Flex technology, curved walls and surfaces are no problem. Installation remark: It is necessary to screw this profile on the wall. Flex Radius: R min = 200 cm
Flexible Installation Guide
Dimension: L 200 x H 6.9 x W 7.1 cm Flex ‎
Click to view product
Half column kit (K3111, K3151 & K3001). Use flat against a wall, or in pairs to wrap around pipework, RSJ's etc. Max height 2710mm. Shaft dia (at base) 300mm. See also component dimensions below. External grade paint required if installed outside.
Medium/large Ceiling rose - click image for larger picture. Use Decofix Pro adhesive FDP500 to install. Matches with R14 & R16 ceiling roses. Match with skirting SX118.
Dimension: Diameter 53.5cm
Click to view product
Complements our dentil cornice C211 and C422 and also covings CX107 and CX129. Also match with P7040 dado rail, R24 ceiling rose and SX118, SX156 skirting board. Also available in flexible material.
Dimension: 2m (L) x 65mm (H) x 30mm (P)
See below for matching corner profile elements Match with P8030/C , P8030/D dado rail, C213, C217 and SX118 skirting board.
Dimension: 2m (L) x 40mm (H) x 15mm (P)
Flexible version of the C341. A stately classic cornice moulding inspired by the rich heritage of English country homes. Thanks to its Flex technology, curved walls and surfaces are no problem. Installation remark: It is necessary to screw this profile on the wall. Flex Radius: R min = 400 cm
Flexible Installation Guide
Dimension: L 200 x H 8.8 x W 12.2 cm Flex ‎
Click to view product
Dimension: 42 x 42 cm
Click to view product
Set Half Column Ionic plain low.
| K1141 Capital | 12.5 x 17 x 35 - Ø 35 cm |
| K1101 Column | 201 x 11 x 22 - Ø 22 cm |
| K1151 Base | 12 x 16 x 32 - Ø 32 cm |
| Maximum Height | 225.5 cm |
Ionic half capital with two beautiful volutes called ram's horns.
Half column unfluted, plain shaft. Did you know? Cylindrical columns have to be tapered according to strict rules of proportion.
Half Doric pedestal.
Dimension: Max Height 225.5 cm
Click to view product
Beautifully detailed ornate design in gold gilt, match with gilt cornices and corbels, also available in white.
Lightweight synthetic materials easily installed using adhesives.
Dimension: 28 cm diameter
Contact the artist, Sam Rey. This mosaic kitchen counter top by Sam Rey was featured in Belle Magazine.
Commissions accepted POA.
Flexible version of the X157. Our simplest panel moulding is part of the SQUARE family. Use this multifunctional profile to fit your entire home with the same moulding. All you need to do is select the correct size to fit your space. Installation remark: It is necessary to screw this profile on the wall. Flex Radius: R min = 35 cm, R* min = 260 cm
Available in other sizes..
(1).png)
(4).png)
Dimension: L 200 x H 6.6 x W 1.3 cm
Please note columns, capitals and bases are made to order in Belgium, allow 8-10 weeks delivery for manufacture and sea freight. Please call for more information 02 9700 7222
Installation Guide.
Dimension: Hmax = 2.88m / Hmin = 2.515m
Click to view product
Flexible version of the SX180. The pure shape and perfect proportions of the High Line skirting boards create an ideal transition between floor and wall. Thanks to its Flex technology, curved walls and surfaces are no problem. Installation remark: It is necessary to screw this profile on the wall. Flex Radius: R min = 45 cm
.png)
Dimension: L 200 x H 12 x W 1.6 cm
Click to view product
PX209 RIBBON is the perfect new rounded trim for your walls and all of our 3D wall covering panels. Bypass joints with this elegant in-between profile that is a great transition on the wall between panels. Or use it as a slim and refined panel mould, it can perfectly hold its own on the wall. Designed by Orio Tonini.
Dimension: Dimensions: 200 x 1 x 1.8cm
.png)
Dimension: Dimensions: L 200 x H 15.5 x W 3.1cm
.png)
.png)
.jpg)
Skirting Installation Guide
Browse our Catalogue
Duropolymer Data Sheet - our products are waterproof for indoor and exterior use
SX122 Technical Drawing
For more information call (09) 9097858 / 02108066077
Dimension: L 200 x H 7.9 x W 2.2 cm ‎
Click to view product
The W121 Wall Frame is unique: a ready-made wall panel with a lot of detail for easy, fast and beautifully finished installation. It is an economical solution for wall depth creation and can be made even more dynamic by filling it up with with our insert W122 or W123.
.png)
.png){kind=small}
Dimension: L 50 x H 3.2 x W 50 cm ‎
Based on the iconic CX190 U-profile, the U-STEPS take on different shapes with ease. With a limited number of decorative mouldings, you can bring walls and entire interiors to life. The results are always unique. Designed by Orio Tonini.
Indirect Lighting Fact Sheet
.png)
.png)
Dimension: L 200 x H 11.3 x W 4 cm Duropolymer® ‎
SUPAK 3 ways adjustment key
Installation Video Standard Floor
Click to view product
Dimension: L 200 x H 19.5 x W 19.5 cm ‎
Flexible version of the CX106. This elegant cornice moulding creates a subtle transition from wall to ceiling. Thanks to its Flex technology, curved walls and surfaces are no problem. Installation remark: It is necessary to screw this profile on the wall. Flex Radius: R min = 360 cm
Flexible Installation Guide
Dimension: L 200 x H 11.8 x W 11.7 cm Flex ‎
Click to view product
Set Full Column Tuscan plain lowest
Assembly K3112 (Capital) + K3102 (Column) + K2132 (Base)
To make a column shorter or longer it is always better to start with the base (the foot) of the column. Columns can't be used to bear constructions but they are ideal to wrap constructive elements. Please check the minimal inside width of the columns.
Dimension: Hmax = 2.334m / Hmin = 2.245m
Click to view product
Half column segment kit (K4131, K4121 & 4 x K4001). Use singly flat against a wall, or in pairs to wrap around pipework, RSJ's etc. See below for individual component dimensions.
Small/medium Ceiling rose - click image for larger picture. Use Decofix Pro adhesive FDP500 to install. Match with skirting SX118.
Dimension: Diameter 32cm
Click to view product
Match with P7020 dado rail, C218 coving, R37 ceiling rose. Also available in flexible material.
Special Order. Special orders allow 15 days delivery, airfreight will incur additional costs, please call to arrange a no obligation quote 02 9700 7222.
Dimension: 2m (L) x 105mm (H) x 20mm (P)
Architrave (as used on KX001 & KX003). Length 2.3 m only. Match with D210 corner block and SX118 skirting board.
Dimension: L: 230cm x H: 9.5cm x W: 2.4cm
Dentil coving (see also our C211 and C422 cornice patterns from our Luxxus range, as well as CX129 below). 12cm x 12cm (move over image for enlarged picture). Install with Decofix Pro (fixing adhesive/filler) and Extra Fix (for ultra high strength joint bonding). Available in 2m or 2.44m sections. Match with P6020 dado rail, R07, 08, 09 and 16 ceiling roses and SX137 skirting board.
100% recyclable.
Impact and water resistant, great for bathrooms and wet areas.
Use Quick Links to the Accessories Menu to order adhesives. Use only DecoHydro for fixing in wet areas with DecoFix Extra for joining.
Dimension: 2m (L) x120mm(H) x120mm(P)
Indirect uplighting cornice ref C358 - mouse-over image for cornice dimensions (cm's). For lights, see below.
Use Quick Links to the Accessories Menu to order adhesives.
See here for technical details and installation instructions
Indirect Lighting Brochure
Dimension: L: 2m x H: 7.5cm x W: 14cm
A small, plain, concentric ceiling centre - Click image to enlarge. Matches with R08, R09, R40, R66 and R76 ceiling roses.
Use Quick Links to the Accessories Menu to order adhesives. Use only DecoHydro for fixing in wet areas with DecoFix Extra for joining.
PURCHASE NOW
Dimension: Dimension: Diameter 26cm
Flexible version of the C901. Large Ovolo-inspired cornice moulding. Thanks to its Flex technology, curved walls and surfaces are no problem. Installation remark: It is necessary to screw this profile on the wall. Flex Radius: R min = 600 c
Indirect Lighting Brochure
.png)
.jpg)
Installation Guide Flexible Moldings
Dimension: L 200 x H 14.8 x W 12.4 cm Flex ‎
.jpg)
Dimension: 500
Click to view product
Available in other sizes ...
Dimension: L 200 x H 4 x W 1 cm Flex ‎
Click to view product
Available in other sizes ....
(2).png)
SX183F.png)
SX184F
Dimension: Dimensions: 200 x 5 x 1.3cm
Set Half Column Ionic plain high.
| K1141 Capital | 12.5 x 17 x 35 - Ø 35 cm |
| K1101 Column | 201 x 11 x 22 - Ø 22 cm |
| K1131 Base | 57 x 17.5 x 35 - Ø 35 cm |
| Maximum Height | 270.5 cm |
Set Half Column Ionic plain high.
Half column unfluted, plain shaft. Did you know? Cylindrical columns have to be tapered according to strict rules of proportion.
High square socle pedestal for half columns.
Dimension: Max Height 270.5 cm
Click to view product
.png)
Contact the artist, Sam Rey. Bathroom benchtop.
Commissions accepted POA.
The W122 is one of the insert options for our ready-made wall panels. Fit four of them in the W120 or one in the W121. Mix and match with our other insert option W123.
Dimension: L 33.3 x H 2.6 x W 33.3 cm
SUPAR – SUPAR stackable ring
DATA SHEET
.jpg)
.jpg)
What’s the height of the SUPAR ring for outdoor raised floor pedestals?
The stackable rings for Uptec pedestals for raised floors are 3cm high each.
Installation Video Standard Floor
Dimension: Modular ring +30 mm
Click to view product
.jpg)
Fit to coving/cornice C307 (above) approx every 15-20 cm's.
Use Quick Links to the Accessories Menu to order adhesives.
Available on Special Order
Dimension: 75mm (L) x 95mm (H) x 40mm (P)
Flexible version of the CX109. Simple curve with a subtle carved line below. Thanks to its Flex technology, curved walls and surfaces are no problem. Installation remark: It is necessary to screw this profile on the wall. Flex Radius: R min = 160 cm
Flexible Installation Guide
Dimension: L 200 x H 4.4 x W 4.4 cm Flex ‎
Click to view product
Set Full Column Tuscan plain high
Assembly: K3112 (Capital) + (Column) K3102 + (Base) K3152
To make a column shorter or longer it is always better to start with the base (the foot) of the column. Columns can't be used to bear constructions but they are ideal to wrap constructive elements. Please check the the minimal inside width of the columns.
To make a column shorter or longer it is always better to start with the base (the foot) of the column. Columns can't be used to bear constructions but they are ideal to wrap constructive elements. Please check the minimal inside width of the columns.
Installation Guide
Dimension: Hmax = 2.72m Hmin = 2.28m
Click to view product
Doric column capital - fit with K3002 or K3102. Dims: 415mm square, Height: 125mm
Half column kit (K1121, K1151 & K1101). Use flat against a wall, or in pairs to wrap around pipework, RSJ's etc. Max height 2425mm. Shaft dia (at base) 220mm. See also component dimensions below. External grade paint required if installed outside.
Large rosette with classic carving. Can be used to conceal cables. Installation remark: It is necessary to screw this profile on the wall.
Dimension: L 69.5 x H 4.8 x W 69.5 cm Purotouch® ‎
Click to view product
Match with C303 coving, R37 ceiling rose, P7010 dado rail and SX118 skirting board. Also available in flexible material.
Special Order. Special orders allow 15 days delivery, airfreight will incur additional costs, please call to arrange a no obligation quote 02 9700 7222.
Dimension: 2m (L) x 110mm (H) x 20mm (P)
Especially good for hiding cables etc behind (16mm gap to wall). Also available in flexible format for curved walls (see below). Supplied primed, ready to paint.
Also available in flexible.
Dimension: Height 11cm, projection 2.5cm, length 2m
A small but elegant profile - Orac Decor coving C322 (min radius for flexible version 1.2m). Match with C215, C240, C260 coving, P8030 dado rail and SX105, SX118 skirting board.
Use Quick Links to the Accessories Menu to order adhesives. Use only DecoHydro for fixing in wet areas with DecoFix Extra for joining.
Dimension: 2m (L) x 50mm (H) x 40mm (P)
Flexible version of the C902. Smaller Ovolo-inspired cornice moulding. Fits all types of interiors effortlessly. Thanks to its Flex technology, curved walls and surfaces are no problem. Installation remark: It is necessary to screw this profile on the wall. Flex Radius: R min = 600 cm
Indirect Lighting Brochure
Installation Guide Flexible Moldings
Dimension: L 200 x H 10.3 x W 10.3 cm Flex ‎
Gentle curlicues to fit any interior. This panel moulding's elegant design provides any space with refined allure.
.jpg)
Dimension: L 200 x H 4.1 x W 1.7 cm
Ottomans are generally made-to-order so please allow up to 5 weeks for delivery.
Dimension: 500mm H x 430mm diameter
Click to view product
Flexible version of the SX163. Our simplest panel moulding is part of the SQUARE family. Thanks to its Flex technology, curved walls and surfaces are no problem. Installation remark: It is necessary to screw this profile on the wall. Flex Radius: R min = 35 cm
.png)
Available in other sizes ...
(2).png)
.png)
Dimension: L 200 x H 10.2 x W 1.3 cm Flex ‎
Click to view product
Flexible version of the SX183. This multifunctional skirting board with rounded top provides endless possibilities. Thanks to its Flex technology, curved walls and surfaces are no problem. Installation remark: It is necessary to screw this profile on the wall. Flex Radius: R min = 40 cm
Also available in other sizes ...
.png)
SX182F.png)
SX184F
Dimension: L 200 x H 7.5 x W 1.3 cm
Set Half Column Ionic plain XXL lowest.
| K3141 Capital | 16 x 22.5 x 45 - Ø 45 cm |
| K3101 Column | 202 x 15 x 30.5 - Ø 30.5 cm |
| K2131 Pedestal | 20 x 21.5 x 43 - Ø 43 cm |
| Maximum Height | 238 cm |
Large ionic half capital with two beautiful volutes called ram's horns.
Large tapered half shaft with top outline.
Tuscan pedestal for half columns with low rounded socle
Dimension: Max Height 238 cm
Click to view product
Contact the artist, Sam Rey
This vinyl spa bath was brought back to life finish by the artist with mosaic tiles.
Commissions accepted POA.
Dimension: Dimensions: - L200 x H17 x W14.5 cm
The W123 is one of the insert options for our ready-made wall panels. Fit four of them in the W120 or one in the W121. Mix and match with our other insert option W122
Dimension: L 33.3 x H 3.5 x W 33.3 cm
SUPALFX – Low fixed-head pedestal for raised floors
Uptec FX is a fixed head system consisting of only 3 polypropylene elements adjustable in height, designed to create outdoor raised floors. The Uptec FX system, consists of: SUPALFX (low support - adjustable from 28 to 43mm) SUPASFX (standard support - adjustable from 43 to 58mm) SUPAR (30mm stackable ring compatible with SUPASFX to reach heights above 58mm)
Data Sheet
Click to view product
Dimension: L 200 x H 24.8 x W 6.3 cm
Flexible version of the CX110. This classic cornice moulding creates an elegant transition from wall to ceiling. Thanks to its Flex technology, curved walls and surfaces are no problem. Installation remark: It is necessary to screw this profile on the wall. Flex Radius: R min = 180 cm
Flexible Installation Guide
Dimension: L 200 x H 4.5 x W 4.1 cm Flex ‎
Click to view product
K1112 (Capital) + K1002 (Column) + K1152 (Base)
To make a column shorter or longer it is always better to start with the base (the foot) of the column. Columns can't be used to bear constructions but they are ideal to wrap constructive elements. Please check the minimal inside width of the columns.
Please note columns, capitals and bases are made to order in Belgium, allow 8-10 weeks delivery for manufacture and sea freight. Please call for more information 02 9700 7222
Installation Guide.
Dimension: Hmax/min = 2.42m
Click to view product
Half column kit (K1121, K1131 & K1101). Use flat against a wall, or in pairs to wrap around pipework, RSJ's etc. Max height 2875mm. Shaft dia (at base) 220mm. See also component dimensions below. External grade paint required if installed outside.
A simple rounded lamp fixture ideal for all interiors. All fittings & instructions included
Dimension: 15 x 15 x 30.5 cm
NEW larger column, as per KD4 above but with 2.4m shaft. Max total height = 3.120m Column K3202, Base K2132, Capital K3112.
Our external range of products are manufactured and designed to be maintenance free for decades to come. As they can be more complicated to order please call us to discuss any installation issues or questions you may have on 02 9660 2177.
Due to the nature of these products, additional carriage charges will apply. Available on Special Order
Dimension: 300mm shaft diameter
Orac Decor coving/cornice lighting trough - install 15-20 cm from ceiling for full room surround lighting effect. "Mouse over" picture for profile dimensions (cm's).
Use Quick Links to the Accessories Menu to order adhesives.
See here for technical details and installation instructions
Indirect Lighting Brochure
Dimension: L: 2m x H: 7.5cm x W: 17cm
Cornice lighting trough ref C357 - mouse-over cornice image for product dimensions (cm's), and see light fitting options below.
Use Quick Links to the Accessories Menu to order adhesives. Use only DecoHydro for fixing in wet areas with DecoFix Extra for joining.
See here for technical details and installation instructions
Dimension: L: 200cm x H: 7.5 x W: 11cm
.png)
.png)
.png)
Dimension: L 19 x H 1.7 x W 8.6 cm
Click to view product
Flexible version of the SX184. This multifunctional cornice moulding with rounded top provides endless possibilities. Thanks to its Flex technology, curved walls and surfaces are no problem. Installation remark: It is necessary to screw this profile on the wall. Flex Radius: R min = 45 cm
Dimension: L 200 x H 11 x W 1.3 cm Flex ‎
.png)
Dimension: L 200 x H 6.9 x W 7.1 cm Flex ‎
Click to view product
To facilitate shipping, we only sell the covers.
NOTE: PLEASE allow up to 3 weeks delivery if this item is not in stock. We will notify you if this is the case.
Dimension: 42 x 42 cm
Click to view product
Set Half Column Ionic plain XXL high
| K3141 Capital | 16 x 22.5 x 45 - Ø 45 cm |
| K3101 Column | 202 x 15 x 30.5 - Ø 30.5 cm |
| K3151 Pedestal | 57.5 x 22.5 x 45.5 - Ø 45.5 cm |
| Maximum Height | 275.5 cm |
Large ionic half capital with two beautiful volutes called ram's horns.
Large tapered half shaft with top outline.
High octogonal foot for half columns.
Dimension: Max Height 275.5 cm
Click to view product
Installation Guide
Dimension: L 200 x H 2 x W 1 cm ‎
Click to view product
.png)
This medium-tall, rounded profile provides your wall with an elegant finish.
.png)
Skirting Installation Guide
Browse our Catalogue
Duropolymer Data Sheet - our products are waterproof for indoor and exterior use
SX137 Technical Drawing
For more information call (09) 9097858 / 02108066077
Available in ...
.png)
Dimension: L 200 x H 9.9 x W 1.5 cm
Click to view product
Dimension: L 200 x H 2 x W 40 cm‎
Click to view product
SUPASFX – Standard fixed-head pedestal for raised floors
The Uptec SUPASFX support is adjustable in height from to 43 to 58 mm, with a base of 190 mm in diameter and a head of 130 mm. It’s possible to compensate for slopes by using the SUPL2 and SUPL3 accessories. SUPALFX is the ideal solution in terms of ease of use for wide, horizontal and perfectly planar areas. On the head it is possible to apply the accessories for standard installations (2mm spacers or 4mm spacers) or to add the aluminium joist (on the head with 4mm spacers). To reach higher elevations, just add the SUPAR stackable extension ring.
The base of the supports has a diameter of 190mm and the top has a diameter of 130mm. SUPA2FX and SUPA4FX heads can be mounted on the top of supports to create joints of 2mm and 4mm, respectively. The heads are made of polypropylene and rubber and provide high anti-noise and anti slip performance.
Data Sheet
Flexible version of the CX123. This classic cornice moulding with elegant curves creates a neat transition from wall to ceiling. Thanks to its Flex technology, curved walls and surfaces are no problem. Installation remark: It is necessary to screw this profile on the wall. Flex Radius: R min = 280 cm
Flexible Installation Guide
Dimension: L 200 x H 8 x W 8 cm Flex ‎
Click to view product
Half column kit (K1121, K1151 & K1001). Use flat against a wall, or in pairs to wrap around pipework, RSJ's etc. Max height 2415mm. Shaft dia (at base) 220mm. See also component dimensions below. External grade paint required if installed outside.
.png)
Dimension: L 95.2 x H 4.8 x W 95.2 cm Purotouch® ‎
Click to view product
Match with C304 coving, R28 ceiling rose and SX118, SX155 skirting board. Also available in flexible material.
Special Order. Special orders allow 15 days delivery, airfreight will incur additional costs, please call to arrange a no obligation quote 02 9700 7222.
Dimension: 2m (L) x 80mm (H) x 25mm (P)
NEW larger column, as per KI3 above but with 2.4m shaft. Max total height = 2.725m. Column K3202, Base K2132, Capital K3142. Our external range of products are manufactured and designed to be maintenance free for decades to come. As they can be more complicated to order please call us to discuss any installation issues or questions you may have on 02 9660 2177.
Due to the nature of these products, additional carriage charges will apply. Available on Special Order
Dimension: 300mm shaft diameter
Contemporary modern cornice range - click picture for further info and example roomset images. Match with C353, C355, C356 coving, P5051 dado rail and SX104 skirting board.
Incorporated shadow line makes decorating finish (paint or wallpaper) much easier and gives effect of 'floating' on the ceiling. Looks fantastic!
Use Quick Links to the Accessories Menu to order adhesives.
Dimension: 200 x 4 x 21.5 cm
New! DX163 -2300 multi-functional profiles are made from knock and water resistant Duropolymer a 100% recyclable synthetic material. This amazing light weight profile is both durable and multi-functional, it can be incorporated into skirting profiles used as cornice, trim, architraves or for panel mouldings.
Match with our Duropolymer DX range of skirtings and architraves.
Tip! Add our FB13 Mitre Box to your order for perfect joins.
NEW Multi-purpose contemporary cornice, skirting and trim. Match with DX162-2300 OR DX163-2300.
100% recyclable.
Impact and water resistant, great for bathrooms and wet areas.
Use Quick Links to the Accessories Menu to order adhesives. Use only DecoHydro for fixing in wet areas with DecoFix Extra for joining.
Available on Special Order
Dimension: L: 200cm x H: 7cm W: 1.3cm
DX163-2300 multi-purpose architrave, panelling or cornice. Match with dx162-2300m PX 147, PX113 and skirting SX118/F.
Impact and water resistant, great for bathrooms and wet areas.
100% recyclable
Use Quick Links to the Accessories Menu to order adhesives. Use only DecoHydro for fixing in wet areas with DecoFix Extra for joining.
Dimension: L:230cm x H:10cm x W:1.3cm
Gentle curlicues to fit any interior. This panel moulding's elegant design provides any space with refined allure. Use with panel moulding P8030
Dimension: L 13.2 x H 1.7 x W 13.2 cm
Flexible version of the CX106. This elegant cornice moulding creates a subtle transition from wall to ceiling. Thanks to its Flex technology, curved walls and surfaces are no problem. Installation remark: It is necessary to screw this profile on the wall. Flex Radius: R min = 360 cm
.png)
Dimension: L 200 x H 11.8 x W 11.7 cm Flex ‎
Click to view product
Fretwork is an original & timeless design inspired by the architectural gable details of a traditional Queenslander homestead.
Hand-printed on hard-wearing Upholstery weight, pre-shrunk European Natural Linen.
Currently availalble in RED print or custom colours.
Dimension: 500 H x 430 mm diameter
Click to view product
.jpg)
The flexible version of the SX195. The SX195 HAMBURG is a timeless skirting board. Its unique shape with a rich history provides your wall with an elegant finish. Flex Radius: R min = 30 cm
.png)
Installation Guide
Dimension: L 200 x H 8 x W 1.9 cm Flex ‎
Set Half Column Ionic fluted low.
| K1141 Capital | 12.5 x 17 x 35 - Ø 35 cm |
| K1001 Column | 200 x 11 x 22 - Ø 22 cm |
| K1151 Base | 12 x 16 x 32 - Ø 32 cm |
| Maximum Height | 224.5 cm |
Ionic half capital with two beautiful volutes called ram's horns.
Half column fluted shaft.
Half Doric pedestal base.
Dimension: Max Height 2224.5 cm
Click to view product
Set Full Column Doric fluted high
Click to view product
Flexible version of the SX137. This medium-tall, rounded profile provides your wall with an elegant finish. Thanks to its Flex technology, curved walls and surfaces are no problem. Installation remark: It is necessary to screw this profile on the wall. Flex Radius: R min = 40 cm
.png)
Skirting Installation Guide
Browse our Catalogue
Duropolymer Data Sheet - our products are waterproof for indoor and exterior use
SX137 Technical Drawing
For more information call (09) 9097858 / 02108066077
Available in ...
.png)
SX138FDimension: L 200 x H 9.9 x W 1.5 cm
Click to view product
SUPT pedestals for floating floors installation of minimum height
Click to view product
Assembly" K3112 (Capital) + K3002 (Column) + K2132 (Base)
To make a column shorter or longer it is always better to start with the base (the foot) of the column. Columns can't be used to bear constructions but they are ideal to wrap constructive elements. Please check the minimal inside width of the columns.
Please note columns, capitals and bases are made to order in Belgium, allow 8-10 weeks delivery for manufacture and sea freight. Please call for more information 02 9700 7222
Installation Guide.
Dimension: Hmax = 2.335m / Hmin = 2.235m
Click to view product
Half column kit (K1121, K1131 & K1001). Use flat against a wall, or in pairs to wrap around pipework, RSJ's etc. Max height 2865mm. Shaft dia (at base) 220mm. See also component dimensions below. External grade paint required if installed outside.
Dimension: L 54.5 x H 2.4 x W 54.5 cm Purotouch® ‎
Click to view product
Match with C218, D161 pediment and R64 ceiling rose.
Special Order. Special orders allow 15 days delivery, airfreight will incur additional costs, please call to arrange a no obligation quote 02 9700 7222.
Dimension: 2m (L) x 220mm (H) x 20mm (P)
Click to view product
A classic corbel-like lamp fixture. All fittings & instructions included
Dimension: 15.5 x 19 x 39 cm
Smallest of our contemporary cornice styles. Click cornice picture for side profile image
Use Quick Links to the Accessories Menu to order adhesives.
Dimension: 2m (length) x 2cm (max thickness) x 6cm (projection)
NEW Multi-purpose contemporary cornice, skirting and trim. Match with DX162-2300 OR DX163-2300.
100% recyclable.
Impact and water resistant, great for bathrooms and wet areas.
Use Quick Links to the Accessories Menu to order adhesives. Use only DecoHydro for fixing in wet areas with DecoFix Extra for joining.
Dimension: L:200 x H: 4 x W:1.3cm
Multi - purpose skirting / architrave/ cornice, contemporary styling. Match with panel mouldings PX 103, PX 144, PX120, PX114, PX103 and cornice CX161
Impact, insect and water resistant, great for bathrooms and wet areas.
100% Recyclable
Use Quick Links to the Accessories Menu to order adhesives. Use only DecoHydro for fixing in wet areas with DecoFix Extra for joining.
Dimension: 230 x 4 x 1 cm
Flexible version of the CX109. Simple curve with a subtle carved line below. Thanks to its Flex technology, curved walls and surfaces are no problem. Installation remark: It is necessary to screw this profile on the wall. Flex Radius: R min = 160 cm
Dimension: L 200 x H 4.4 x W 4.4 cm Flex ‎
Dimension: 500mm H x 430mm diameter
Click to view product
Set Half Column Ionic fluted high
| K1141 Capital | 12.5 x 17 x 35 - Ø 35 cm |
| K1001 Column | 200 x 11 x 22 - Ø 22 cm |
| K1131 Base | 57 x 17.5 x 35 - Ø 35 cm |
| Maximum Height | 269 cm |
Ionic half capital with two beautiful volutes called ram's horns.
Half column fluted shaft.
High square socle pedestal for half columns.
Dimension: Max Height 269 cm
Click to view product
.jpg)
Dimension: Dimensions: 200 x H 11 x W 17.8 cm
This tall, rounded profile provides your wall with a classic finish.
Skirting Installation Guide
Browse our Catalogue
Duropolymer Data Sheet - our products are waterproof for indoor and exterior use
SX138 Technical Drawing
For more information call (09) 9097858 / 02108066077
Available in ....
.png)
Dimension: L 200 x H 13.8 x W 1.5 cm
Classic panel moulding with gentle curlicues. Can also be used for a nice finish at the bottom of a skirting board. Combine with PX103A corner element. Also available in a larger size, see PX120
.png)
.png)
Dimension: L 200 x H 2.5 x W 1.2 cm
SUPB base to reach a greater height
Click to view product
.png)
Dimension: L 19 x H 1.2 x W 3.5 cm
Click to view product
Large rosette with classic carving. Can be used to conceal cables. Installation remark: It is necessary to screw this profile on the wall.
Dimension: L 70 x H 5.9 x W 70 cm Purotouch® ‎
Click to view product
To make a column shorter or longer it is always better to start with the base (the foot) of the column. Columns can't be used to bear constructions but they are ideal to wrap constructive elements. Please check the the minimal inside width of the columns.
Dimension: Hmax = 2.335m / Hmin = 2.235m
Matching corner element for dado P8020 (above)
Special Order. Special orders allow 15 days delivery, airfreight will incur additional costs, please call to arrange a no obligation quote 02 9700 7222.
Dimension: 200mm(L) x85mm(H) x25mm (P)
Orac Decor coving/cornice lighting trough - install 15-20 cm from ceiling for full room surround lighting effect. "Mouse over" picture for profile dimensions (cm's). Light fitting options can be found further down in the product list.
Use Quick Links to the Accessories Menu to order adhesives.
See here for technical details and installation instructions
Dimension: L: 2m x H: 8cm x W: 17.5cm
Multi - purpose skirting / architrave, contemporary styling. Match with panel moulding PX 164, PX 147 and cornice CX161.
Arhitraves mix and match profiles, overlay CX160 on DX157-2300 LHS, RHS / Centred.
Imact and water resistant, great for bathrooms and wet areas.
100% recyclable
Dimension: 230 x 6.5 x 1.3cm
Rigid or flexible version of our most popular skirting (SX118 as above) - solves all those curved wall problems! Min radius 0.4m. Available in 2m lengths.
Impact and water resistant, great for bathrooms and wet areas.
Use Quick Links to the Accessories Menu to order adhesives. Use only DecoHydro for fixing in wet areas with DecoFix Extra for joining.
Dimension: L 200 x H 13.8 x W 1.8 cm Flex ‎
Flexible version of the CX110. This classic cornice moulding creates an elegant transition from wall to ceiling. Thanks to its Flex technology, curved walls and surfaces are no problem. Installation remark: It is necessary to screw this profile on the wall. Flex Radius: R min = 180 cm
.png)
Dimension: L 200 x H 4.5 x W 4.1 cm Flex ‎
This product is shock- and waterproof thanks to its high-density polymer blend.
Dimension: 200 x 2 x 2cm
Dimension: 500 H x 430 mm diameter
Click to view product
Set Half Column Ionic fluted XXL low.
| K3141 Capital | 16 x 22.5 x 45 - Ø 45 cm |
| K3001 Column | 201 x 15.3 x 30.5 - Ø 30.5 cm |
| K2131 Pedestal | 20 x 21.5 x 43 - Ø 43 cm |
| Maximum Height | 237 cm |
Large ionic half capital with two beautiful volutes called ram's horns.
Fluted half column.
Tuscan pedestal for half columns with low rounded socle.
Dimension: Max Height 237 cm
Click to view product
.png)
Dimension: Dimensions: L 200 x H 3.4 x W 3 cm
Flexible Installation Guide
Dimension: 2m (L) x95mm (H) x95mm (P)
Click to view product
Flexible version of the SX138. This tall, rounded profile provides your wall with a classic finish. Thanks to its Flex technology, curved walls and surfaces are no problem. Installation remark: It is necessary to screw this profile on the wall. Flex Radius: R min = 40 cm
Skirting Installation Guide
Browse our Catalogue
Duropolymer Data Sheet - our products are waterproof for indoor and exterior use
SX138 Technical Drawing
For more information call (09) 9097858 / 02108066077
Available in ....
Dimension: L 200 x H 13.8 x W 1.5 cm
SUPATRAY safety grid
Installation Video
Dimension: 59.8 x 59.8 x 3.8cm
Classic panel moulding with gentle curlicues. Can also be used for a nice finish at the bottom of a skirting board. Combine with PX120 corner element. Also available in a smaller size PX103
.png)
Dimension: L 200 x H 4 x W 1.9 cm
Flexible version of the CX132. This small rounded profile creates a nice transition from wall to ceiling. Thanks to its Flex technology, curved walls and surfaces are no problem. Installation remark: It is necessary to screw this profile on the wall. Flex Radius: R min = 70 cm
Flexible Installation Guide
Dimension: L 200 x H 2 x W 2 cm Flex ‎
Installation Guide.
Dimension: Hmax = 2.71m Hmin = 2.395m
Click to view product
Dimension: L 62 x H 4.1 x W 62 cm Purotouch® ‎
Click to view product
This restrained, timeless skirting board with a linear design is perfect for almost any interior. Designed by Xavier Donck.
.png)
.png)
PDF Drawing File
Dimension: L 200 x H 10.8 x W 2.5 cm Duropolymer® ‎
Architrave (as used on KX001 & KX003). Length 2.3 m only. Match with D200 corner block and SX118 skirting board.
Dimension: L: 230cm x H; 9.3cm x W:2.3CM
Orac Decor decorative elements combine to create this stunning "Queen of Light" display.
Dimension: 74.5 cm diameter
Multi - purpose skirting / architrave / cornice, contemporary styling. Match with panel moulding PX116 PX103 and cornice CX161.
Impact and water resistant, great for bathrooms and wet areas.
100% recyclable. Imact and water resistant, great for bathrooms and wet areas.
Use Quick Links to the Accessories Menu to order adhesives. Use only DecoHydro for fixing in wet areas with DecoFix Extra for joining.
Dimension: 230 x 6 x 1.2 cm
Flexible version of the CX123. This classic cornice moulding with elegant curves creates a neat transition from wall to ceiling. Thanks to its Flex technology, curved walls and surfaces are no problem. Installation remark: It is necessary to screw this profile on the wall. Flex Radius: R min = 280 cm
.png)
Dimension: L 200 x H 8 x W 8 cm Flex ‎
Click to view product
Linen is a beautiful natural fibre known for its great absorption qualities. Tea Towel size is 50 cm x 70 cm (19.5 x 27.5 inches).
Machine washable. Expect some shrinkage after first wash.
Dimension: 50 x 70 cm
Click to view product
Set Half Column Ionic fluted XXL high.
| K3141 Capital | 16 x 22.5 x 45 - Ø 45 cm |
| K3001 Column | 201 x 15.3 x 30.5 - Ø 30.5 cm |
| K3151 Pedestal | 57.5 x 22.5 x 45.5 - Ø 45.5 cm |
| Maximum Height | 274.5 |
Large ionic half capital with two beautiful volutes called ram's horns.
Fluted half column.
High octogonal foot for half columns.
Dimension: Max Height 274.5 cm
Click to view product
NEW! Multifunctional Profile - Skirting, cornice, architrave. Also available in 10cm, 6.5cm and 4cm heights view on product.
Available in standard and flexible, use the drop-down list for flexible prices.
Multi-functional profiles are made from knock and water resistant Duropolymer a 100% recyclable synthetic material. This amazing light weight profile is both durable and multi-functional, it can be incorporated into skirting profiles used as cornice, trim, architraves or for panel mouldings.
This multi-fonctional profile opens a world of possibilities and allows you to deliver customised first-rate work at an affordable price.
Drawing files available in PDF, .dwg and dxf files, please email us.
Dimension: L 200 x H 15.1 x W 1.4 cm
.png)
Dimension: Dimensions: L200 x H 2.7 x W 2.7cm
Dimension: L 200 x H 8.3 x W 3.4 cm Purotouch® ‎
SUPATRAYGRIP
SUPATRAYGRIP is made of aluminum and connects four SUPATRAY grids for added stability during installation
Dimension: 2 & 4mm
.png)
.png)
.png)
Dimension: L 19 x H 2 x W 8.8 cm
Click to view product
Flexible version of the CX190. Subtle, impact-resistant U-shaped profile. A handy solution to conceal cables along walls and ceilings. Designed by Orio Tonini. Thanks to its Flex technology, curved walls and surfaces are no problem. Installation remark: It is necessary to screw this profile on the wall. Flex Radius: R min = 30 cm, R* min = 130 cm
Flexible Installation Guide
Dimension: L 200 x H 2 x W 3 cm Flex ‎
Large rosette with oval pattern.
Dimension: L 62 x H 4.2 x W 62 cm Purotouch® ‎
Click to view product
See below for matching corner profile elements Match with P8030/C , P8030/D dado rail, C213, C217 and SX118 skirting board.
Corner element P8030 C/D
Dimension: 2m (L) x 40mm (H) x 15mm (P)
Click to view product
Set Full Column Tuscan plain lowInstallation Guide.
Please note columns, capitals and bases are made to order in Belgium, allow 8-10 weeks delivery for manufacture and sea freight. Please call for more information 02 9700 7222
Dimension: Hmax-2.725m / Hmin=2.66m
Click to view product
Integrating a stylish and flexible art or curtain hanging system into a retail, home, office or gallery or public space is quickly and easily don with click rail solution - in just 3 simple steps the click rail can be fastened to a wall ready for art, posters, graphics or other interior decor to be hung.
By inserting droppers into the click rail track at any location, combined with your choice of hooks, you can create a flexible and easily changeable suspension solution for all yor wall decorations.
This system cannot be used with solid plaster cornice mouldings, they are too heavy. Orac Decor mouldings are made from high quality light-weight European synthetic materials which are a fraction of the weight of wood or plaster.
Please email us for pricing for connectors, droppers and hooks.
 |
 |
.jpg) |
Dimension: L: 200cm x H: 3.45cm x W: 0.94 cm
Click to view product
A simple cove with attractive 'cut-out' along the bottom length. 4.5cm x 4.5cm (click image for enlarged picture). Install with Decofix Pro (fixing adhesive/filler) and Extra Fix (for ultra high strength joint bonding). Match with CX126 coving, PX120 or PX113 dado rail, R08 ceiling rose and SX125 skirting board.
100% recyclable. Impact and water resistant, great for bathrooms and wet areas.
Use Quick Links to the Accessories Menu to order adhesives. Use only DecoHydro for fixing in wet areas with DecoFix Extra for joining.
Dimension: 2m (L) x45mm (H) x45mm (P)
.png)
Dimension: L 200 x H 4.9 x W 4.9 cm Flex ‎
Click to view product
Linen is a beautiful natural fibre known for its great absorption qualities. Tea Towel size is 50 cm x 70 cm (19.5 x 27.5 inches). Machine washable. Expect some shrinkage after first wash.
Dimension: 50 x 70 cm
Click to view product
Set Half Column Ionic plain XXL low.
| K3141 Capital | 16 x 22.5 x 45 - Ø 45 cm |
| K3201 Column | 240 x 16.5 x 33.5 - Ø 33.5 cm |
| K2131 Pedestal | 20 x 21.5 x 43 - Ø 43 cm |
| Maximum Height | 276 cm |
Large ionic half capital with two beautiful volutes called ram's horns.
Plain tapered half column.
Tuscan pedestal for half columns with low rounded socle.
Dimension: Max Height 276 cm
Click to view product
Dimension: L 200 x H 6.5 x W 7 cm Purotouch® ‎
.png)
Dimension: Dimensions: 200 x 2 x 3cmL200 x H 2 x W 3 cm
Flexible version of the SX155. This restrained, timeless skirting board with a linear design is perfect for almost any interior. Thanks to its Flex technology, curved walls and surfaces are no problem. Designed by Xavier Donck. Installation remark: It is necessary to screw this profile on the wall. Flex Radius: R min = 30 cm
.png)
Skirting Installation Guide
Browse our Catalogue
Duropolymer Data Sheet - our products are waterproof for indoor and exterior use
SX155 Technical Drawing
For more information call (09) 9097858 / 02108066077
Dimension: L 200 x H 10.8 x W 2.5 cm
SUPATRAYTAB Tab for safety grid
Spacers for safety tray
SUPATRAYTAB is a rubber disc with anti-slip and anti-noise performance, and is available in two different fin sizes (2 mm and 4 mm joints).
.jpg)
This tall skirting board prevents the abrupt transition from wall to floor and effortlessly conceals any small imperfections. Designed by Xavier Donck.
.png)
.png){kind=small}
.jpg)
Dimension: L 200 x H 20.2 x W 1.6 cm
Set Full Column Tuscan plain highest
Installation Guide
Dimension: Hmax = 3.1m / Hmin = 2.785
Click to view product
Matching corner element for dado P8030 above. Match with P8030 and P8020 panel mouldings and skirting SX118 / SX156. Cornice C217.
Special Order. Special orders allow 15 days delivery, airfreight will incur additional costs, please call to arrange a no obligation quote 02 9700 7222.
Dimension: 190mm(L) x55mm(H) x15mm (P)
Flexible version of the SX157. Our simplest cornice moulding is part of the SQUARE family. Thanks to its Flex technology, curved walls and surfaces are no problem. Installation remark: It is necessary to screw this profile on the wall. Flex Radius: R min = 35 cm, R* min = 260 cm
Flexible Installation Guide
Dimension: L 200 x H 6.6 x W 1.3 cm Flex
Click to view product
Integrating a stylish and flexible art or curtain hanging system into a retail, home, office or gallery or public space is quickly and easily don with click rail solution - in just 3 simple steps the click rail can be fastened to a wall ready for art, posters, graphics or other interior decor to be hung.
By inserting droppers into the click rail track at any location, combined with your choice of hooks, you can create a flexible and easily changeable suspension solution for all yor wall decorations.
The click rail solution has a maximum load weight of 30kg per metre when correctly fixed to a wall using our click and connects positioned every 30cm.
Please email us for pricing pricing of connectors, droppers and hangers.
 |
9.4303 White / Primed 200cm / 300cm |
 |
9.4105 End Cap White |
 |
9.4107 Corner Connector White |
 |
9.4341 Auminium Brushed 200cm / 300cm |
 |
9.4104 End Cap Grey |
 |
9.4108 Corner Connector Grey |
 |
9.4113 Click & Connect Spacer |
 |
9.4919 Wall Screw |
 |
9.4909 Nylon Wall Plug 6mm |
 |
9.6645 Rail Stopper |
Dimension: L: 2m x H: 2.5cm x W: 0.85cm
Click to view product
Xinnix recessed fixture for energy saving light (not incl)
Dimension: 19.5 x 34 x 8.5cm
Flexible version of the CX127. Timeless cornice moulding that combines easily with a variety of decorating styles. Thanks to its Flex technology, curved walls and surfaces are no problem. Installation remark: It is necessary to screw this profile on the wall. Flex Radius: R min = 240 cm
.png)
.jpg)
Dimension: L 200 x H 9.4 x W 9.4 cm Flex ‎
Dimension: 50 x 70 cm
Click to view product
Set Half Column Ionic plain XXL highest.
| K3141 Capital | 16 x 22.5 x 45 - Ø 45 cm |
| K3201 Column | 240 x 16.5 x 33.5 - Ø 33.5 cm |
| K3151 Pedestal | 57.5 x 22.5 x 45.5 - Ø 45.5 cm |
| Maximum Height | 313.5 |
Large ionic half capital with two beautiful volutes called ram's horns.
Plain tapered half column.
High octogonal foot for half columns.
Dimension: Max Height 313.5cm
Click to view product
.png)
Small decorative floral ceiling ornament.
.png)
.png)
Dimension: L 19.5 x H 1.8 x W 19.5 cm Purotouch® ‎
BST20 Data Sheet
.jpg)
Click to view product
Flexible version of the SX162. Our simplest cornice moulding is part of the SQUARE family. Thanks to its Flex technology, curved walls and surfaces are no problem. Installation remark: It is necessary to screw this profile on the wall. Flex Radius: R min = 20 cm, R* min = 80 cm
Flexible Installation Guide
Dimension: L 200 x H 4 x W 1 cm Flex
.png)
.png)
.png)
Skirting Installation Guide
Dimension: L 200 x H 6.6 x W 1.3 cm
Click to view product
Matching corner element for dado P8030 (above).
Dimension: 130mm(L) x130mm(H) x15mm (P)
Architrave kit - 2 x DX119 (213cm), 1 x DX119 (107cm) and 2 x D200 corner elements (see above)
For interior / exterior use.
Integrating a stylish and flexible art or curtain hanging system into a retail, home, office or gallery or public space is quickly and easily don with click rail solution - in just 3 simple steps the click rail can be fastened to a wall ready for art, posters, graphics or other interior decor to be hung.
By inserting droppers into the click rail track at any location, combined with your choice of hooks, you can create a flexible and easily changeable suspension solution for all yor wall decorations.
Applicable weight up to 50kg/ m, available in white / primer. Please email us for pricing for connectors, droppers and hooks.
 |
 |
 |
 |
 |
 |
9.5420 White available in 200cm, 300cm lengths |
 |
9.4120 End Cap, White |
 |
9.4122 Corner Connector White |
 |
9.5320 Click Rail Aluminium Brushed, available in 200cm/300cm |
 |
9.4121 Click Rail End Cap, Grey |
 |
9.4123 Click Rail Corner Connector Grey |
 |
9.4124 Click Rail Click & Connect 1 and 3 Spacers |
 |
9.4125 Click Rail Wall Screw |
Dimension: L:200cm m x H: 3.75cm x W: 0.95cm
Click to view product
Match with PX147, CX109 coving, R08 ceiling rose and SX118/F skirting board.
100% recyclable.
Use Quick Links to the Accessories Menu to order adhesives. Use only DecoHydro for fixing in wet areas with DecoFix Extra for joining.
Dimension: L:230cm x H:10cm x W:1.3cm
Marguerite fabric design is now available as tea-towels, tea-towels are hand-printedon 100% Natural Linen using water-based, solvent free inks.
Choose from Red, Crème or Cottage Blue prints on Natural Linen or Blue Marine print on White Linen
Dimension: 50 x 70 cm
Click to view product
Dimension: L 200 x H 15.9 x W 14.3 cm
Please note columns, capitals and bases are made to order in Belgium, allow 8-10 weeks delivery for manufacture and sea freight. Please call for extra information 02 9700 7222
Installation Guide.
Dimension: Hmax/min = 2.55m
Click to view product
.jpg)
The BORDERTEC BSR is recommended for contouring marble and stone balconies and sidewalks. Its unique sectional design allows the use of two different floor thicknesses with the same reversible profile. BORDERTEC BSR in size BSR 20/* can be used with PROFILITEC floating floor support systems. BORDERTEC BSR contains all necessary elements for state-of-the-art installation.
.jpg)
BSR DATA SHEET
.jpg)
Orac Decor coving C331 - Similar to C220 in that it extends across ceiling. (Min radius for flexible version 4.2m). Cornice available in 2m lengths. Also matches with C200, C213 coving, P4020 or P8020 dado rail and SX118 skirting board.
Use Quick Links to the Accessories Menu to order adhesives.
Available on Special Order
Dimension: 2m (L) x 60mm (H) x 135mm (P)
Architrave kit - 2 x DX119 (213cm), 1 x DX119 (107cm), 2 x D200 corner elements and 2 x D350 'feet'
Flexible version of the SX163. Our simplest cornice moulding is part of the SQUARE family. Thanks to its Flex technology, curved walls and surfaces are no problem. Installation remark: It is necessary to screw this profile on the wall. Flex Radius: R min = 35 cm
Flexible Installation Guide
Dimension: L 200 x H 10.2 x W 1.3 cm Flex
Click to view product
Maximum weight 15kg per drop with suitable picture hook. Use with picture hooks specified for Perlon drops.
Please email us for pricing for connectors, droppers and hooks with selected codes.
 |
9.4205
Picture Hook to 4kg
|
 |
3021.100 Newly H50 Picture Hook to 5kg |
 |
9.4207 Picture Hook to 5kg |
 |
3021.200 Newly Picture Hook to 5kg |
 |
3021.200 Newly H50 Picture Hook for 2mm white rod to 5kg |
 |
9.4208 Picutre Hook to 10kg |
 |
9.4242 Picture Hook to 12kg |
 |
9.4261 Picture Hook to 15kg |
 |
9.4262 Picture Hook to 15kg |
.jpg) |
3020.100 Newly H100 Picture Hook to 20kg |
 |
3020.200 Newly H100S Securiy Picture Hook to 20kg |
Dimension: 7kg Picture Hook
Click to view product
Subtle, impact-resistant U-shaped profile. A handy solution to conceal cables along walls and ceilings. Designed by Orio Tonini
.png)
Dimension: L 200 x H 2 x W 3 cm Duropolymer® ‎
Choose from White or Raspberry prints on Natural Linen
Dimension: 50 x 70 cm
Click to view product
.jpg)
Flexible version of the SX157. Our simplest skirting board is part of the SQUARE family. Thanks to its Flex technology, curved walls and surfaces are no problem. Installation remark: It is necessary to screw this profile on the wall. Flex Radius: R min = 35 cm, R* min = 260 cm
Also available in two other sizes.
SX162F SX163F
Skirting Installation Guide
Browse our Catalogue
Duropolymer Data Sheet - our products are waterproof for indoor and exterior use
SX157 Technical Drawing
For more information call (09) 9097858 / 02108066077
Available in ...
(2).png)
Dimension: L 200 x H 6.6 x W 1.3 cm Flex ‎
BSJ Border profile to be used with 2cm tiles
..
Click to view product
A large, timeless classic. Can be installed horizontally or vertically. See lifestyle application image of coving C332 here or here (with additional panel moulding). Match with C217, C334 coving, P8020 or P8040 dado rail and SX118, SX156 skirting board.
For an innovative twist combine this cornice with ultra contemporary Deco Rail. The Deco Rail system provides a functional way of draping curtains and hanging pictures invisibly supported from behind the cornice. No longer will hanging frames damage your walls, suitable for loads from 4 - 20kg.
Use Quick Links to the Accessories Menu to order adhesives.
Available on Special Order
Dimension: 2m (L) x 230mm (H) x 115mm (P) OR 115mm (H) x 230mm (P)
The flexible version of the SX194. The SX194 is our smallest and simplest profile and is part of the SQUARE family. This multifunctional profile can be used as panel moulding to finish a wainscoting or as a skirting board to create a subtle transition between floor and wall. Flex Radius: R min = 40 cm, R* min = 80 cm
Flexible Installation Guide
.png)
Dimension: L 200 x H 2 x W 1 cm Flex ‎
Click to view product
To make a column shorter or longer it is always better to start with the base (the foot) of the column. Columns can't be used to bear constructions but they are ideal to wrap constructive elements. Please check the the minimal inside width of the columns.
Assembly K3142 + K3002 + K2132
Please note columns are made to order in Belgium, allow 8-10 weeks delivery for manufacture and shipping.
Installation Guide
Dimension: Hmax = 2.37m / Hmin = 2.28m
Cornice C332 and Deco Rail. What a discovery, contemporary and functional Orac Decor cornices!
Ultra contemporary European design, Decor Rail provides a functional system for draping curtains invisibly, hanging pictures. Picture frames no longer need to damage walls, hang cable systems capable of holding loads from 4 - 20kg.
Innumberable uses and applications for the home, office and commercial applications.
CX126 cornice shown with very thin edging that can be feathered in to wall & ceiling. 9cm x 9cm (move over image for enlarged picture). Install with Decofix Pro (fixing adhesive/filler) and Extra Fix (for ultra high strength joint bonding). Match with CX109 coving, PX102, PX144 dado rail, R72 ceiling rose and SX125 skirting board.
Dimension: 50 x 70 cm
Click to view product
Match with P5020B corner elements
Dimension: 200 x 1.5 x 9 cm
Click to view product
.jpg)
Dimension: Dimensions: 260 x 12.5 x 4.5cm
NEW - Product finished with RAL9003 Signal white. It is not necessary to repaint this profile after installation. Our simplest skirting board is part of the SQUARE family. Use this multifunctional profile to fit your entire home with the same skirting board. All you need to do is select the correct size to fit your space.
.png)
.png)
.png)
Skirting Installation Guide
Browse our Catalogue
Duropolymer Data Sheet - our products are waterproof for indoor and exterior use
SX157 Technical Drawing
For more information call (09) 9097858 / 02108066077
Available in three more sizes
(2).png)
.png){kind=small}
Dimension: L 200 x H 6.6 x W 1.3 cm Duropolymer® ‎
Base Option Spacer - 2 mm tabs - 3/32” for ceramic tile installations
Dimension: 2 mm joints
Another of our bestsellers - Orac Decor C333 - a timeless "swan-neck" design. (Min radius for flexible version 3.3m). See example of coving application image here. And another example (showing as curtain pelmet here). Match with C217, C213 coving, P8020 or P8030 dado rail and SX118, SX156 skirting board.
Use Quick Links to the Accessories Menu to order adhesives.
Available on Special Order
Dimension: 2m (L) x 120mm (H) x 110mm (P)
Match with D300 architrave foot and the Byblos Arch Facia System. Flexible option available.
Dimension: 2m (L) x 90mm (H) x 30mm (P)
.jpg)
Dimension: Dimensions: L2300 x H6.6 x W1.3cm‎
Orac Decor C213 - a very popular linear pattern (Min radius for flexible version 1.8m). Matches with C217, C240 coving, P8020 or P8030 dado rail and SX118, SX156 skirting board.
For an innovative twist combine this cornice with ultra contemporary Deco Rail. The Deco Rail system provides a functional way of draping curtains and hanging pictures invisibly supported from behind the cornice. No longer will hanging frames damage your walls, suitable for loads from 4 - 20kg / m
Use Quick Links to the Accessories Menu to order adhesives.
Dimension: L: 2000 x H: 34.5 x W: 9.4 mm
Flexible version of the C250. This traditional, symmetrical cornice moulding is the smallest in our range. Thanks to its Flex technology, curved walls and surfaces are no problem. Installation remark: It is necessary to screw this profile on the wall. Flex Radius: R min = 70 cm
Flexible Installation Guide
.png)
.png)
Dimension: L 200 x H 1.6 x W 1.6 cm Flex ‎
Click to view product
Dimension: 50 x 70 cm
Click to view product
Flexible version of the SX157. Our simplest cornice moulding is part of the SQUARE family. Thanks to its Flex technology, curved walls and surfaces are no problem. Installation remark: It is necessary to screw this profile on the wall. Flex Radius: R min = 35 cm, R* min = 260 cm
Installation Guide Flexible Moldings
.png)
.jpg)
Also available in 2 other sizes
(5).png)
SX162F .png)
SX163F
Installation Guide Flexible Moldings
Dimension: L 200 x H 6.6 x W 1.3 cm Flex ‎
Installation Guide.
Dimension: Hmax = 2.76 m / Hmin = 2.66 m
Click to view product
.jpg)
.png)
.jpg)
Dimension: Dimensions: L 200 x H 9.7 x W 2cm
Click to view product
Larger "swan neck" cornice. Orac Decor coving C334 (min radius for flexible version 3.8m). See life application image of Profile here. Match with C217, C322 coving, P8020 or P8040 dado rail and SX118, SX156 skirting board.
Use Quick Links to the Accessories Menu to order adhesives.
Available on Special Order
Dimension: 2m (L) x 150mm (H) x 195mm (P)
Assembly: K3142 (Capital) + K3202 (Column) + K3152 (Base)
To make a column shorter or longer it is always better to start with the base (the foot) of the column. Columns can't be used to bear constructions but they are ideal to wrap constructive elements. Please check the the minimal inside width of the columns.
Please note columns, capitals and bases are made to order in Belgium, allow 8-10 weeks delivery for manufacture and sea freight. Please call for more information 02 9700 7222
Installation Guide.
Dimension: Hmax =3.135m / Hmin = 2.785 m
Click to view product
For loads of 20kg /m. Orac Decor cornice CX126 only 0.7 Kg / m.
Does the Deco Rail system work with a conventional plaster cornice? NO, tradional plaster is too heavy, Orac Decor cornices are made from Purotouch, Duropolymer and Durofoam any extremely lightweight quality European synthetic mouldings.
Dimension: L: 200cm x H: 3.45cm x W: 0.94cm
Installation Guide Flexible Moldings
Available in two other sizes:
.png)
SX157F (7).png)
SX163FDimension: L 200 x H 4 x W 1 cm Flex ‎
Click to view product
Set your table in style!
Our original hand-drawn Marguerite design is hand-printed with water-based, toxic-free inks on 100% natural, European linen.
Linen is a natural fibre and will shrink slightly with initial wash. Hand or gentle machine wash.
Choose from Creme, Cottage Blue or Red
Dimension: 50 x 33 cm (Set of Two)
Click to view product
Dimension: 200 x 9.1 x 3 cm
Click to view product
Base Option Spacer - 4 mm tabs - 5/32” for ceramic tile installations and tile installations with aluminum joists
Dimension: 4 mm joints
Dimension: 4 mm joints
.png)
Segmented column 3 x K4002 (Column) + K4122 (Base) + K4312 (Capital)
Please note columns, capitals and bases are made to order in Belgium, allow 8-10 weeks delivery for manufacture and sea freight. For more information please call 02 9700 7222.
Installation Guide.
Dimension: Hmax/min = 2.69m
Click to view product
This simple skirting board has a slight angle and fits any interior. This multifunctional moulding creates a seamless transition betweens walls and doors, windows and even ceilings.
.png)
Skirting Installation Guide
Browse our Catalogue
Duropolymer Data Sheet - our products are waterproof for indoor and exterior use
SX159 Technical Drawing
For more information call (09) 9097858 / 02108066077
Dimension: L 200 x H 6 x W 1.2 cm
Very large swan neck cornice, similar to C333 and C334. Also matches with C17, C990 coving, P9900 or P9901 dado rail and SX118, SX156 skirting board.
Use Quick Links to the Accessories Menu to order adhesives.
Available on Special Order
Dimension: 2m (L) x 215mm (H) x 200mm (P)
For an innovative twist combine this cornice CB522 with ultra contemporary Deco Rail. The Deco Rail system provides a functional way of draping curtains and hanging pictures invisibly supported from behind the cornice. No longer will hanging frames damage your walls, suitable for loads from 4 - 20kg / metre
Use Quick Links to the Accessories Menu to order adhesives.
Dimension: L: 200 cm H: 7 cm W: 7 cm
Flexible version of the SX163. Our simplest skirting board is part of the SQUARE family. Thanks to its Flex technology, curved walls and surfaces are no problem. Installation remark: It is necessary to screw this profile on the wall. Flex Radius: R min = 35 cm
Installation Guide Flexible Moldings
(6).png)
Available in two other sizes:
(6).png)
SX162F .png)
SX157F
.png)
Dimension: L 200 x H 10.2 x W 1.3 cm Flex ‎
Set your table in style! The original Marguerite design is hand-printed with water-based, toxic-free inks on 100% natural, European linen.
Available in two lengths, table runners measure approx. 180 cm (70.5") x 42 cm (16.5") or shorter size is 140 cm (55.25") x 42 cm (16.5 "). May be be custom-made to any size. Please contact us for a quote. Gentle machine wash or dry clean. Fabric is pre-washed and pre-shrunk for you.
Choose from Crème, Cottage Blue, Black or Red print on Natural Linen or Blue Marine on White Linen. NOTE: PLEASE allow up to 3 weeks delivery if this item is not in stock. We will notify you if this is the case.
Dimension: 180 x 42cm (long) or 140 x 42cm (short)
Click to view product
PROSKIRTING GILED is an innovative profile in silver anodized aluminum and polished chrome, with 80 and 100 mm height, with a rigid vinyl resin TOP PROFILE, with a 17.5mm exposed surface, available in 3 different marmorised finishes, provided with an integrated LED lighting system generating a soft and indirect light. PROSKIRTING GILED can be used instead of the classic skirting board or rotated 180 degrees and installed along the ceiling edges, allowing to cover up to 15mm wide joints. The reflection of the LED light by the aluminum surface of the profile creates a modern atmosphere. PROSKIRTING GILED is equipped with all the trim pieces available such as inside and outside corner, joints, end caps and power supply box. Conceived and designed by the designer Gilberto Toneguzzi.
.png)
Dimension: L2000 x H80 x W16.4mm
Click to view product
Aluminium Joists available in silver anodised alumium and black.
Installation Video Aluminium Joists
.png)
Segmented column 4 x K4002 (Column) + K4122 (Base) + K4312 (Capital)
Please note columns, capitals and bases are made to order in Belgium, allow 8-10 weeks delivery for manufacture and sea freight. For more information please call 02 9700 7222.
Installation Guide.
Dimension: K4002 x 4 HMax/min = 3.39m
Click to view product
Extra large cornice for the maximum statement - 260mm projection x 270mm wall drop. Match with C332 coving, D120 door pediment, P8050 dado rail, R64 ceiling rose and SX118, SX156 skirting board.
Use Quick Links to the Accessories Menu to order adhesives.
Available on Special Order
Dimension: 2m (L) x 270mm (H) x 260mm (P)
Multi-purpose cornice, skirting, and architrave, impact and water resistant. Match with DX157-2300. Trim with PX164.
Dimension: L 200 x H 1.3 x W 3.9 cm
For an innovative twist combine this traditional cornice C332 with Deco Rail. The Deco Rail system provides a functional way of draping curtains and hanging pictures invisibly supported from behind the cornice. No longer will hanging frames damage your walls, suitable for loads from 4 - 20kg.
Use Quick Links to the Accessories Menu to order adhesives.
A timeless lamp fixture for stylish indirect lighting. All fittings & instructions included.
Dimension: 11.5 x 16.5 x 41 cm
Flexible version of the SX180. The pure shape and perfect proportions of the High Line cornice mouldings create an ideal transition between wall and ceiling. Thanks to its Flex technology, curved walls and surfaces are no problem. Installation remark: It is necessary to screw this profile on the wall. Flex Radius: R min = 45 cm
Dimension: L 200 x H 12 x W 1.6 cm Flex ‎
Choose from Red, Cottage Blue or Crème print.
Dimension: 45 x 45 cm
Click to view product
PROSKIRTING GILED is an innovative profile in silver anodized aluminum and polished chrome, with 80 and 100 mm height, with a rigid vinyl resin TOP PROFILE, with a 17.5mm exposed surface, available in 3 different marmorised finishes, provided with an integrated LED lighting system generating a soft and indirect light. PROSKIRTING GILED can be used instead of the classic skirting board or rotated 180 degrees and installed along the ceiling edges, allowing to cover up to 15mm wide joints. The reflection of the LED light by the aluminum surface of the profile creates a modern atmosphere. PROSKIRTING GILED is equipped with all the trim pieces available such as inside and outside corner, joints, end caps and power supply box. Conceived and designed by the designer Gilberto Toneguzzi.
Dimension: L2000 x H80 x W16.4mm
Click to view product
Dimension: L = 2.40 m
Click to view product
.png)
Multi-purpose skirting and architrave, impact and water resistant. Match with DX163-2300. Trim with PX164.
Design Skirting Profiles 2017
Dimension: L 200 x H 1.3 x W 6.9 cm
For an innovative twist combine this traditional Luxxus cornice C332 or C213.The Deco Rail system provides a functional way of draping curtains and hanging pictures invisibly supported from behind the cornice. No longer will hanging frames damage your walls, suitable for loads from 4 - 20kg.
Use Quick Links to the Accessories Menu to order adhesives.
Dimension: 2m (length) x 4cm (max thickness) x 21.5cm (projection)
Antique-inspiration for this fixture. All fittings & instructions included.
Dimension: 12.5 x 15.5 x 30.5 cm
Flexible version of the SX182. This multifunctional cornice moulding with rounded top provides endless possibilities. Thanks to its Flex technology, curved walls and surfaces are no problem. Installation remark: It is necessary to screw this profile on the wall. Flex Radius: R min = 35 cm
Dimension: L 200 x H 5 x W 1.3 cm Flex ‎
Cover only is sold to facilitate ease of shipping.
Dimension: 42 x 42cm
Click to view product
Segmented column 5 x K4002 (Column) + K4122 (Base) + K4312 (Capital)
Please note columns, capitals and bases are made to order in Belgium, allow 8-10 weeks delivery for manufacture and sea freight. For more information please call 02 9700 7222.
Installation Guide.
Dimension: Hmax/min = 4.09m
Click to view product
.png)
A romantic model for soft indirect lighting. All fittings & instructions included
Dimension: 17 x 14.5 x 29 cm
Dimension: L 200 x H 7.5 x W 1.3 cm Flex ‎
Click to view product
Dimension: 42 x 42 cm
Click to view product
Our simplest skirting board is part of the SQUARE family. Use this multifunctional profile to fit your entire home with the same skirting board. All you need to do is select the correct size to fit your space.
(1).png)
.png)
Skirting Installation Guide
Browse our Catalogue
Duropolymer Data Sheet - our products are waterproof for indoor and exterior use
SX162 Technical Drawing
For more information call (09) 9097858 / 02108066077
Available in three more sizes
(1).png)
Dimension: L 200 x H 4 x W 1 cm
Click to view product
Can a raised floor installed with Uptec pedestals withstand car passage?
Raised floors cannot withstand car passage. One of the advantages of this system is, in fact, the possibility of carrying out a dry tile installation without the use of adhesive and allowing for the future removal of the structure. This type of installation has optimal resistance to static loads (Uptec resistance to point loads = 14kN), but the components are not connected to each other, so the wheels of a vehicle which cause friction across the tile surface could collapse the structure.
Click to view product
- Simple easy mounting in just one move
- Strong loading up to 20Kg
- Safe always in the right position
Click to view product
Click to view product
Flexible version of the SX187. The pure shape and perfect proportions of this smallest High Line cornice moulding create an ideal transition between wall and ceiling. Thanks to its Flex technology, curved walls and surfaces are no problem. Installation remark: It is necessary to screw this profile on the wall. Flex Radius: R min = 40 cm
Dimension: L 200 x H 7.5 x W 1.2 cm Flex ‎
Dimension: 42 x 42 cm
Click to view product
.png)
.png)
Xinnix - which sounds very close to the Dutch phrase meaning 'I see nothing' - comes by its name honestly. These integrated armatures disappear into the wall. The light niches can be painted along with the walls. The perfect optical illusion. Recessed fixture for Mycrolynx or Mycrolynx LED.
Photo Gallery
Ask a question
Dimension: 10 x 10 x 9 cm
Click to view product
Dimension: 42 x 42 cm
Click to view product
Flexible version of the SX162. Our simplest skirting board is part of the SQUARE family. Thanks to its Flex technology, curved walls and surfaces are no problem. Installation remark: It is necessary to screw this profile on the wall. Flex Radius: R min = 20 cm, R* min = 80 cm
.png)
Skirting Installation Guide
Browse our Catalogue
Duropolymer Data Sheet - our products are waterproof for indoor and exterior use
SX162 Technical Drawing
For more information call (09) 9097858 / 02108066077
Available in two more sizes
(1).png)
Dimension: L 200 x H 4 x W 1 cm Flex ‎
Click to view product
The maximum distance between Uptec pedestals is 60cm. Therefore, when using tile lager than 60 x 60cm, we recommend placing a central pedestal in addition to the pedestals placed on the four corners of the tile.
.png)
Decorative Light Box
Our most popular Axxent coving profile ever, and as featured on makeover TV shows. 12cm x 12cm (move over image for enlarged picture). Install with Decofix Pro (fixing adhesive/filler) and Extra Fix (for ultra high strength joint bonding). See here for use of CX106 as both coving and skirting board.
Trimmed with PX120.
Dimension: 2m (L) x120mm(H) x120mm(P)
This XL profile has been created as part of The Cotswold’s family to fit into grand projects and spaces. The big brother of C321
Dimension: 200 x 14 x 6 cm
Dimension: 42 x 42 cm
Click to view product
This large, simple skirting board is part of the SQUARE family. Use this multifunctional profile to fit your entire home with the same skirting board. All you need to do is select the correct size to fit your space.
.png)
.png)
.png)
Skirting Installation Guide
Browse our Catalogue
Duropolymer Data Sheet - our products are waterproof for indoor and exterior use
SX163 Technical Drawing
For more information call (09) 9097858 / 02108066077
Available in three more sizes
Dimension: L 200 x H 10.2 x W 1.3 cm
How do I choose between an Uptec head with a 2mm or 4mm gap?
Choosing between a head with a 2mm (SUPA2) or a 4mm (SUPA4) gap is mainly aesthetically driven (taking into consideration that in outdoor installations a wider joint between the tiles is not as evident as in indoor installations). The advantage of using a head with a 4mm gap is being able to do the final height adjustments using the SUPAK tool, even after the floor is installed, without having to remove any pieces. In addition, the 4mm head can also be used with installations containing aluminum joists.
.png)
Design Seating
Orac Decor C213F - a very popular linear pattern (Min radius for flexible version 1.8m).
Use Quick Links to the Accessories Menu to order adhesives.
Dimension: 2m (L) x 80mm (H) x 80mm (P)
NEW - Product finished with RAL9003 Signal white. It is not necessary to repaint this profile after installation. This large, simple skirting board is part of the SQUARE family. Use this multifunctional profile to fit your entire home with the same skirting board. All you need to do is select the correct size to fit your space.
.png)
SX163 PDF
Adhesives - For a Perfect Finish
Dimension: L 200 x H 10.2 x W 1.3 cm Duropolymer® ‎
Click to view product
Available in jewel tones of Sapphire, Ruby and Emerald to brighten up any room.
Hand-printed with water-based, toxic-free inks on 100% European white linen. Fabric has been pre-washed and pre-shrunk by the manufacturer.
Dimension: 42 x 42 cm
Click to view product
PLANO PS aluminum profile for drywall
.png)
.jpg)
Dimension: L2700 x H13/15mm
Click to view product
.png)
Another different cornice style for a more modern look. Orac Decor coving C402 (min radius for flexible version 1.5m). Match with C216 coving, P5020, P5021 dado rail, R07 ceiling rose and SX118, SX156 skirting board.
Use Quick Links to the Accessories Menu to order adhesives.
Available on Special Order
Dimension: 2m (L) x 95mm (H) x 105mm (P)
Retail Display Wall
Medium/large period Ceiling rose - match with ceiling roses R18, R76, R50, R40.
Dimension: Diameter 69.5cm
Our original PAPER ROSES design is hand-printed with water-based, toxic-free inks on 100% Natural European linen. The back of the cushion cover is unprinted linen.
Ink colours include our custom-mixed 'Raspberry' & 'Shadow' or White.
Please note that each cushion may look slightly different than image depending on where it is cut on fabric.
Cushion cover measures approx. 42 x 42 cm (16.5 x 16.5 inches). Looks best with 45 x 45 cm insert (18 inches). Cover only is sold to facilitate ease of shipping.
Dimension: 42 x 42 cm
Click to view product
Flexible version of the SX163. Our simplest skirting board is part of the SQUARE family. Thanks to its Flex technology, curved walls and surfaces are no problem. Installation remark: It is necessary to screw this profile on the wall. Flex Radius: R min = 35 cm
Kelle M - Yes, did the installation all by myself. It was really easy. All I needed was a Stanley knife and a caulking gun.
Installation Guide
Available in three sizes.
SX162FSX157F
Dimension: L 200 x H 10.2 x W 1.3 cm Flex ‎
Larger dentil version of C211 cornice - typical of Georgian era. Orac Decor coving C422. Click here for application image of C422 . Match with C219 coving, P6020, P8050 dado rail, R40 ceiling rose and SX118, SX156 skirting board.
Use Quick Links to the Accessories Menu to order adhesives.
Available on Special Order
Dimension: 2m (L) x 170mm (H) x 195mm (P)
Retail Counter
A combination of mouldings create this classically styled counter, panel moulding P6020, PX103, cornice moulding CX107 and trimmed with skirting SX118
Complements our dentil cornice C211 and C422 and also covings CX107 and CX129. Also match with P7040 dado rail, R24 ceiling rose and SX118, SX156 skirting board. Also available in flexible material.
Dimension: 2m (L) x 65mm (H) x 30mm (P)
Dimension: 42 x 42 cm
Click to view product
.png)
.png)
.jpg)
Skirting Installation Guide
Browse our Catalogue
Duropolymer Data Sheet - our products are waterproof for indoor and exterior use
SX165 Technical Drawing
For more information call (09) 9097858 / 02108066077
Available in two more sizes . . .
.png)
.png)
Dimension: L 200 x H 6.9 x W 1.1 cm
.png)
"Art Deco" period cornice styling. Orac Decor coving C602 (min radius for flexible version 1.3m). Match with C400, C300 coving, P7070, P5021 dado rail and SX105 & SX155 skirting board.
Use Quick Links to the Accessories Menu to order adhesives.
Available on Special Order
Dimension: 2m (L) x 55mm (H) x 50mm (P)
Decorative Counter / Display Table
Ceiling rose insert R18, used here for this stacked panel counter create a textured finish P9040, P8030, P8040, P8020, P5020.
Dimension: 2m (L) x 55mm (H) x 25mm (P)
Dimension: 42 x 42 cm
Click to view product
Skirting Installation Guide
Installation Videos - How its done
Installation Tools
Dimension: L 200 x H 6.9 x W 1.1 cm
Click to view product
These popular Brass stair nosings are supplied with ribbed treads that create a stylish option for any staircase.
Custom lengths available in polished brass, antique bronze or antique brass.
Dimension: H1 -55 x H2- 4.6 x W67mm
Clean, modern lighting profile suitable for either up- or downlights. Installation remark: use an aluminum tape on the inside of the profile, or an aluminum LED support to avoid the light showing through the moulding.
See here for technical details and installation instructions
Indirect Lighting Brochure
PDF SX179 Also available in .dwg or .dfx files
Dimension: L 200 x H 9.7 x W 2.9 cm
Click to view product
See here for technical details and installation instructions
Indirect Lighting Brochure
PDF C900 Also available in .dwg or .dfx files
Dimension: 2m (L) x 170mm (H) x 145mm (P)
Click to view product
Display Frame
F11 recessed ceiling dome. Mouse over image for larger picture and dimensions. Match with P8050 dado rail.
Dimension: Max dia 745mm
NOTE: PLEASE allow up to 4 weeks delivery if this item is not in stock. We will notify you if this is the case.
Dimension: 42 x 42 cm
Click to view product
Aluminium or PVC wall skirting boards fixed with glue, screws or invisible nails. It is easy to install for an elegant and lasting finish. The profile contoured ends give a snug fit on the wall covering over the bottom perimeter along the dilation gap joint ensuring necessary expansion movement to the floor. BIB 800 ASN
A two-part skirting consisting of a silver anodised aluminium base with decorative top section. The base section fixes directly to the wall (with mechanical or adhesive fixing) and allows the concealment of low voltage cables, in addition to offering durability and resistance from damp. The top section is available in a range of wood and metal effect decorative finishes and clips in to the base, covering the fixing.
Interlocking in Aluminium / Aluminium and Aluminium / Wood Bicolour effect.
RAL Powder Coating available on request minimum order 200 metres.
.jpg)
The base, available only in silver finish is conceived to match both the aluminium and the solid wood TOPS. Available junctions and end plugs in synthetic resin Silver colour.
H=cm
Finish
Product Code
5cm
Aluminium Silver
Material: extruded anodised aluminium
Length: 2 metres
Base Height: 5cm
Complete skirting Height 8cm
.jpg)
.jpg)
| H=cm | Finish | Product Code |
| 3cm | TOP Silver Aluminium | BI 800 ANS |
| 3cm | TOP Aluminium Anthracite | BI 800 A 50 |
| 3cm | TOP Solid Oak Gloss Painted | BI 800 RO |
| 3cm | TOP Solid Oak - natural finish | BI 800 RON |
The top section interlocks with the fixing base in silver anodised aluminium. This skirting board composed of two separate elements allows creation of a totally innovative dual coloured effect.
.jpg)
.jpg)
Installation Guidelines:
- screw of glue the base to the wall
- place the provided seal into the semicircular gap every 40cm
- insert the finishing top
Length: 2 metres
TOP Height: 3cm
Complete Skirting Height: 8cm
| Profile | Product Code |
| Internal Corner | BII800PS |
| External Corner | BIE800PS |
| End-cap | BIT800PS (Packed in a set 1R + 1L) |
.jpg)
Dimension: 200cm L x 8cm H (BASE 5cm & TOP 3cm) Depth 1.8cm
Click to view product
.jpg)
Click to view product
Clean, modern lighting profile suitable for either up- or downlights. Installation remark: use an aluminum tape on the inside of the profile, or an aluminum LED support to avoid the light showing through the moulding.
See here for technical details and installation instructions
Indirect Lighting Brochure
PDF SX179 Also available in .dwg or .dfx files
Dimension: L 200 x H 9.7 x W 2.9 cm
Click to view product
Flexible version of the SX165. Elegant, classic skirting board from the CONTOUR family which combines a minimalist design with gentle curlicues. Thanks to its Flex technology, curved walls and surfaces are no problem. Installation remark: It is necessary to screw this profile on the wall. Flex Radius: R min = 40 cm
.jpg)
Skirting Installation Guide
Browse our Catalogue
Duropolymer Data Sheet - our products are waterproof for indoor and exterior use
SX165 Technical Drawing
For more information call (09) 9097858 / 02108066077
Available in two more sizes . . .
Dimension: L 200 x H 6.9 x W 1.1 cm Flex
This kitchen mantle uses decorative cornice moulding CX129 decorated with corbel B404 (click image for larger picture and dimensions). Install with Decofix Pro (from our Accessories section).
Dimension: 19.5cm (w) x 31.5 (h) x 11.5 (d)
Dimension: 42 x 42cm
Click to view product
The Windsor lamp stand is an additional cost of $49.00+gst
Dimension: 25.5cm diameter x 24 cm high
Click to view product
.png)
.png)
A contemporary cornice moulding with multiple applications. The additional installation bracket allows this profile to integrate LED lighting seamlessly. Ideal as mood lighting.
.jpg)
See here for technical details and installation instructions
Indirect Lighting Brochure
PDF C991 Also available in .dwg or .dfx files
Dimension: L 200 x H 11 x W 14 cm
Click to view product
Plano BFZ is a construction profile that allows to realize a flush with wall skirting board with the same material used for flooring. In the lower part there are grooves, designed to allow the interlocking of a linear profile, positioned at the desired height based on the thickness of the floor above. It will therefore determine the reference point for calculating the height of doors and windows.
Installation Video
.png)
Dimension: 270L x 12H x W12.5cm
Retail Counter & Display Wall
Stacked panel mouldings combine to create a textured finish to walls and cabinetry with panel mouldings P3020, P4020, P9010, P9040 and flexible cornice moulding C213/F
Dimension: 2m (L) x 60mm (H) x 30mm (P)
Flexible version of the C213. This Canterbury model is perfectly symmetrical. Thanks to its Flex technology, curved walls and surfaces are no problem. The larger C217F version has also been a bestseller for years now. Installation remark: It is necessary to screw this profile on the wall. Flex Radius: R min = 280 cm
.jpg)
Dimension: 2m (L) x 80mm (H) x 80mm (P)
Choose from Creme, Red, Cottage Blue or Black on Natural linen or Blue Marine on White Linen
NOTE: PLEASE allow up to 3 weeks delivery if this item is not in stock. We will notify you if this is the case.
Dimension: 42 x 42 cm
Click to view product
The Windsor lamp stand is an additional cost of $49.00+gst
Dimension: 25.5cm diameter x 24 cm high
Click to view product
-
Flush doors and concealed skirting details
-
Shadow line junctions
-
Contemporary architraves
-
Modern wall panelling systems
.png)
Skirting Installation Guide
Browse our Catalogue
Duropolymer Data Sheet - our products are waterproof for indoor and exterior use
SX168 Technical Drawing
For more information call (09) 9097858 / 02108066077
Available in three more sizes
Dimension: L 200 x H 15.1 x W 1.4 cm
Click to view product
.png)
Designer Light Box
Orac Decor coving/cornice lighting trough - install 15-20 cm from ceiling for full room surround lighting effect. "Mouse over" picture for profile dimensions (cm's). Light fitting options can be found further down in the product list.
Use Quick Links to the Accessories Menu to order adhesives.
See here for technical details and installation instructions
Indirect Lighting Brochure
Dimension: L: 2m x H: 8cm x W: 17.5cm
Choose from Creme, Red, Cottage Blue or Black on Natural linen or Blue Marine on White Linen
NOTE: PLEASE allow up to 3 weeks delivery if this item is not in stock. We will notify you if this is the case.
Dimension: 42 x 42 cm
Click to view product
The Windsor lamp stand is an additional cost of $49.00+gst
Dimension: 25.5cm diameter x 24 cm high
Click to view product
.png)
.png)
Dimension: L 200 x H 11 x W 14 cm Purotouch® ‎
.JPG)
.JPG)
.png)
.png)
.png)
Cover Skirting Installation Guide
Browse our Catalogue
Duropolymer Data Sheet - our products are waterproof for indoor and exterior use
SX171 Technical Drawing
For more information call (09) 9097858 / 02108066077
Cover Skirting available in two more styles
.png)
SX186.png)
SX185 Dimension: L 200 x H 10 x W 2.2 cm
Click to view product
Middle piece, Library arch match with M9010 L/R, keystone M9010A, panel moulding P9010 ad skirting SX156
Fabric weight is 4 oz (115 gsm).
Click to view product
The Windsor lamp stand is an additional cost of $49.00+gst
Dimension: 25.5cm diameter x 24 cm high
Click to view product
.jpg)
.jpg)
Click to view product
Dimension: 30.5 diameter x 30.5 cm high
Click to view product
.jpg)
Flexible version of the SX172. This elegant, timeless design fits any interior. Thanks to its Flex technology, curved walls and surfaces are no problem. Installation remark: It is necessary to screw this profile on the wall. Flex Radius: R min = 35 cm
.png)
Skirting Installation Guide
Browse our Catalogue
Duropolymer Data Sheet - our products are waterproof for indoor and exterior use
SX172 Technical Drawing
For more information call (09) 9097858 / 02108066077
Dimension: L 200 x H 8.5 x W 1.4 cm
Dimension: 42 x 42 cm
Click to view product
For one-way prints (eg Peacock Party), specify if lampshade is for hanging or for lampstand.
Dimension: 40.5 diameter x 30.5 cm high
Click to view product
This classic skirting board is part of the CONTOUR family. To create a consistent look for the entire dwelling, we provide the same design in various sizes.
.png)
.png)
Skirting Installation Guide
Browse our Catalogue
Duropolymer Data Sheet - our products are waterproof for indoor and exterior use
SX118 Technical Drawing
For more information call (09) 9097858 / 02108066077
Available in two more sizes ...
.png)
.png)
Dimension: L 200 x H 10 x W 1.6 cm
.jpg)
.jpg)
Ink colour is our custom-mixed 'Blue Marine' on white Linen
Cover only is sold to facilitate ease of shipping.
Dimension: 42 x 42 cm
Click to view product
Dimension: 30.5 diameter x 30.5 cm high
Click to view product
NEW - Product finished with RAL9003 Signal white. It is not necessary to repaint this profile after installation. Elegant, classic skirting board from the CONTOUR family which combines a minimalist design with gentle curlicues.
(2).png)
Skirting Installation Guide
Dimension: L 200 x H 10 x W 1.6 cm
.jpg)
.jpg)
.jpg)
Dimension: Various Heights 2.7 m lengths
Rounded compact design profile for indirect LED lighting. The subtle shadow line adds to the lighting's ambience. Designed by Orio Tonini. Installation remark: use an aluminum tape on the inside of the profile, or an aluminum LED support to avoid the light showing through the moulding.
.jpg)
See here for technical details and installation instructions
Indirect Lighting Brochure
PDF CX188 Also available in .dwg or .dfx files
For more information call (09) 9097858 / 02108066077
Dimension: L 200 x H 3.4 x W 3 cm
Click to view product
Dimension: 42 x 42cm
Click to view product
.jpg)
.jpg)
Available in two other sizes ...
SX165F SX118FDimension: L 200 x H 10 x W 1.6 cm Flex ‎
Click to view product
Dimension: L 200 x H 3.1 x W 0.9 cm Flex ‎
Dimension: 42 x 42 cm
Click to view product
.jpg)
.jpg)
.jpg)
Dimension: Various Heights 2.7 m lengths
.png)
Skirting Installation Guide
Browse our Catalogue
Duropolymer Data Sheet - our products are waterproof for indoor and exterior use
SX179 Technical Drawing
For more information call (09) 9097858 / 02108066077
Dimension: DIAGONAL L 200 x H 9.7 x W 2.9 cm
Click to view product
To facilitate shipping, we only sell the covers.
NOTE: PLEASE allow up to 3 weeks delivery if this item is not in stock. We will notify you if this is the case.
Dimension: 42 x 42 cm
Click to view product
The pure shape and perfect proportions of the High Line skirting boards create an ideal transition between floor and wall. Whichever style of interior you have.
Skirting Installation Guide
Browse our Catalogue
Duropolymer Data Sheet - our products are waterproof for indoor and exterior use
SX180 Technical Drawing
For more information call (09) 9097858 / 02108066077
Available in two more sizes ...
.png){kind=small}
Dimension: L 200 x H 12 x W 1.6 cm
Click to view product
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
To facilitate shipping, we only sell the covers.
NOTE: PLEASE allow up to 3 weeks delivery if this item is not in stock. We will notify you if this is the case.
Dimension: 42 x 42 cm
Click to view product
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
Flexible version of the SX180. The pure shape and perfect proportions of the High Line skirting boards create an ideal transition between floor and wall. Thanks to its Flex technology, curved walls and surfaces are no problem. Installation remark: It is necessary to screw this profile on the wall. Flex Radius: R min = 45 cm
Dimension: L 200 x H 12 x W 1.6 cm Flex ‎
To facilitate shipping, we only sell the covers.
NOTE: PLEASE allow up to 3 weeks delivery if this item is not in stock. We will notify you if this is the case.
Dimension: 42 x 42 cm
Click to view product
Tall, linear mouldings that visually elongate walls and anchor contemporary interiors. High Line profiles create a sense of height and grandeur while serving as a subtle architectural frame. Strong horizontal emphasis, perfect for corridors, open-plan living areas, or boutique retail spaces.
Skirting Installation Guide
Browse our Catalogue
Duropolymer Data Sheet - our products are waterproof for indoor and exterior use
SX181 Technical Drawing
For more information call (09) 9097858 / 02108066077
Available in two more sizes ...
Dimension: L 200 x H 20 x W 2.2 cm
.jpg)
.jpg)
.jpg)
.jpg)
.png)
Choose from Creme, Red, Cottage Blue or Black on Natural linen or Blue Marine on White Linen
NOTE: PLEASE allow up to 3 weeks delivery if this item is not in stock. We will notify you if this is the case.
Dimension: 42 x 42 cm
Click to view product
.jpg)
.jpg)
.jpg)
.jpg)
We have added adorable black pom-poms trim to create extra pretty cushions.
Dimension: 42 x 42 cm
Click to view product
.jpg)
.jpg)
.jpg)
.png)
Skirting Installation Guide
Browse our Catalogue
Duropolymer Data Sheet - our products are waterproof for indoor and exterior use
SX182 Technical Drawing
For more information call (09) 9097858 / 02108066077
Available in two more sizes
.png)
(1).png)
Dimension: CASCADE L 200 x H 5 x W 1.3 cm
Click to view product
Choose from Creme, Red, Cottage Blue or Black on Natural linen or Blue Marine on White Linen
NOTE: PLEASE allow up to 3 weeks delivery if this item is not in stock. We will notify you if this is the case.
Dimension: 42 x 42cm
Click to view product
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
Flexible version of the SX182. This multifunctional skirting board with rounded top provides endless possibilities. Thanks to its Flex technology, curved walls and surfaces are no problem. Installation remark: It is necessary to screw this profile on the wall. Flex Radius: R min = 35 cm
Available in other sizes ....
(2).png)
SX183FSX184F
Dimension: L 200 x H 5 x W 1.3 cm Flex ‎ Also available in rigid
.png)
Dimension: L 200 x H 7 x W 1.4 cm Purotouch®
Dimension: 42 x 42 cm
Click to view product
.jpg)
.jpg)
.jpg)
.jpg)
Dimension: 42 x 42 cm
Click to view product
Recessed with a frosted cover this is the perfect choice if you require a totally linear continuous line.
Photo Gallery
Ask a question
Dimension: 2m x 15mm LED Casing
Click to view product
STAIRTEC SE is an aluminium anodised profile for stairs with a finish coating to apply post laying job. It may be fixed either with screws or adhesive glue. It is meant to satisfy both indoor and outdoor stair nosing situations as it bears high tolerance against oxidation. This profiles is developed with a top grooved surface and is also supplied with a chamfered edge to better ensure the safety step. Available in different sizes with either a rounded or blunt corner, it is the ideal solution for refurbishing damaged steps and to cover possible defects of cutting or matching in pre-existing surfaces.
.jpg)
Dimension: 2.7 metres long Bx H 42mm x 22mm or 45mm x 33mm
Flexible version of the SX183. This multifunctional skirting board with rounded top provides endless possibilities. Thanks to its Flex technology, curved walls and surfaces are no problem. Installation remark: It is necessary to screw this profile on the wall. Flex Radius: R min = 40 cm
Also available in other sizes ...
SX182FSX184F
Skirting Installation Guide
Browse our Catalogue
Duropolymer Data Sheet - our products are waterproof for indoor and exterior use
SX183F Technical Drawing
For more information call (09) 9097858 / 02108066077
Flexible available in 2 more sizes
.png)
.png)
Dimension: CASCADE L 200 x H 7.5 x W 1.3 cm Flex ‎
Click to view product
Our original 'French Stripes' is inspired by a love for French style.
Hand-cut design is hand-printed on 100% natural, European Linen using water-based, solvent free inks. The back of the cushion cover is unprinted.
Choose from Crème, Red print or Cottage Blue print.
Cushion cover measures approx. 42 x 42 cm (16.5 x 16.5 inches). Looks best with 45 x 45 cm insert (18 inches). To facilitate shipping, we only sell the covers.
NOTE: PLEASE allow up to 4 weeks delivery if this item is not in stock. We will notify you if this is the case.
Dimension: 42 x 42 cm
Click to view product
.jpg)
.jpg)
.jpg)
.png)
.png)
Skirting Installation Guide
Browse our Catalogue
Duropolymer Data Sheet - our products are waterproof for indoor and exterior use
SX183 Technical Drawing
For more information call (09) 9097858 / 02108066077
Signal White painted SX183-RAL also available in 7.5cm
Dimension: L 200 x H 7.5 x W 1.3 cm
Click to view product
Choose from Crème, Red print or Cottage Blue print.
NOTE: PLEASE allow up to 4 weeks delivery if this item is not in stock. We will notify you if this is the case.
Dimension: 42 x 42 cm
Click to view product
.jpg)
.jpg)
Luxurious and surreal, Marlies Dekkers Ambsterdam. Orac Decor mouldings D200, D310, D402, D401, panel mouldings P9010/F, finished with skirting SX118
Orac Decor coving/cornice lighting trough - install 15-20 cm from ceiling for full room surround lighting effect. "Mouse over" picture for profile dimensions (cm's).
Use Quick Links to the Accessories Menu to order adhesives.
See here for technical details and installation instructions
Indirect Lighting Brochure
Dimension: L: 2m x H: 7.5cm x W: 17cm
Expect some shrinkage after first wash.
Dimension: 34 x 34 cm
Click to view product
Our High Output SMD Ribbon consists of 120 x (3528 type) SMD LEDs per/metre evenly spaced along its length which provides a continuous linear light form.
| Input Voltage | 12VDC |
| Power Consumption | 9.6 watts maximum |
| LED Quantity | 120 x SMD LEDs |
| LED Lifespan | 80,000 hours |
| LED Spacing | 8.3mm |
| Cutting Interval | 25mm |
| Beam Angle | >120° |
| Dimensions (WxH/mm) | 10x2 |
| Operating Temp | -20~40°C |
| IP Rating | No IP |
| Roll Length | 5m |
Typical Applications
• Illuminated signage
• Under bench lighting
• Stair lighting
• Handrail/Balustrade lighting
• Backlighting transparent or diffused material
| Colour | Product Code | Luminous Flux(±10%) | Colour Temp |
|---|---|---|---|
 Cool White |
LED-DWA-W | 840lm | 4800K-5300K |
 Warm White |
LED-DWA-WW | 660lm | 3000K-3300K |
Dimension: ULTRA HIGH 2835 SMD LED Strip-120leds Cool White 6000-7000K 14.4W 1400Lm
Click to view product
.jpg)
.jpg)
.jpg)
,
Dimension: Widths: 19mm, 25mm, 50mm, various lengths
.jpg)
A large, timeless classic. Can be installed horizontally or vertically. See lifestyle application image of coving C332 here or here (with additional panel moulding). Match with C217, C334 coving, P8020 or P8040 dado rail and SX118, SX156 skirting board.
For an innovative twist combine this cornice with ultra contemporary Deco Rail. The Deco Rail system provides a functional way of draping curtains and hanging pictures invisibly supported from behind the cornice. No longer will hanging frames damage your walls, suitable for loads from 4 - 20kg.
Use Quick Links to the Accessories Menu to order adhesives.
Dimension: 2m (L) x 230mm (H) x 115mm (P) OR 115mm (H) x 230mm (P)
Dimension: 42 x 42 cm
Click to view product
Architectural Flexible LED Strip also available in IP65
Dimension: Metre
.jpg)
.jpg)
.png)
SL Bronze 25 X 10mm (self adhesive)
.jpg)
.jpg)
Dimension: 2.7 metres long B x H 25 x 10 / 25 x 20 / Self Adhesive
A small but elegant profile - Orac Decor coving C322 (min radius for flexible version 1.2m). Match with C215, C240, C260 coving, P8030 dado rail and SX105, SX118 skirting board.
Use Quick Links to the Accessories Menu to order adhesives.
Dimension: 2m (L) x 50mm (H) x 40mm (P)
Available in jewel tones of Sapphire, Ruby and Emerald to brighten up any room.
Cushion cover measures approx. 42 x 42 cm (16.5 x 16.5 inches). Looks best with 45 x 45 cm insert (18 inches). To facilitate shipping, we sell the covers only
Dimension: 42 x 42 cm
Click to view product
.jpg)
.jpg)
Dimension: 2.7 metres long B x H Various Sizes Refer to Schedule
This water-resistant and paintable cover skirting is ideal for renovations. Designed to be installed on top of existing skirting boards (1.7 x 9.5 cm max.). Old or damaged skirting boards that are difficult to remove are obstacles no more.
.png)
.png)
Cover Skirting Installation Guide
Browse our Catalogue
Duropolymer Data Sheet - our products are waterproof for indoor and exterior use
SX185 Technical Drawing
For more information call (09) 9097858 / 02108066077
Cover Skirting available in two more styles
.png)
(2).png)
.png)
.png)
Dimension: L 200 x H 12 x W 2.5 cm‎
Plain column shaft - K1 series. Height: 2010mm (excl capital & plinth), external dia 220mm
-
✔ Fits over existing skirting boards
-
✔ Strong, durable Duropolymer® profiles
-
✔ Pre-primed and ready for finishing
-
✔ Moisture resistant for varied NZ climates
-
✔ Easy install with DecoFix adhesive system
-
✔ Clean, professional architectural result
Internal Cavity Dimensions
Dimension: L 200 x H 12 x W 2.5 cm
Click to view product
Please note that each cushion will look slightly different as they are hand-cut from the fabric yardage.
NOTE: PLEASE allow up to 3 weeks delivery if this item is not in stock. We will notify you if this is the case.
Dimension: 42 x 42 cm
Click to view product
PlanoBF
| H=cm | Finish | Product Code |
| 6cm | Silver Anodised Aluminium | BF 600 ASN |
Material: Extruded anodised aluminium
Colour: Silver
Length: 2.7 metres
BASE Height: 6cm
| H=cm | Finish | Product Code |
| 5.5cm | Silver Anodised Aluminium | BF 550 ASN |
Material: Extruded anodised aluminium
Colour: Silver
Length: 2.7 metres
TOP Height: 5.5cm
| H=cm | Finish | Product Code |
| 5.5cm | Powder Coated Matt White | BF 550 ASN |
Material: Extruded anodised aluminium
Colour: Powder Coated Matt White
Length: 2.7 metres
TOP Height: 5.5cm
| H=cm | Finish | Product Code |
| 5.5cm | Solid Wood - RON Natural Oak | BF 550 RON |
| 5.5CM | Solid Wood - RO Gloss Painted Oak | BF 550 RO |
Material: Solid Wood
Colour: RON Natural Oak
Colour: RO Gloss painted Oak
Length: 2.7 metres
TOP Height: 5.5cm
The finishing profile is available in three finishes to coordinate with any interior design, a powder coated finish to harmonize with the wall colour, anodised aluminium for a modern look or in an oak finish to complement floors and furniture.
The silver anodised aluminium BASE is installed at the same time as the wall finish to sit flush with the wall acting as the wall base and allowing the plasterworks to be neatly finished.
The TOP finishing profile is fixed once the floor and wall coverings have been fitted and allows for minor differences in floor height +/-2.5mm.
Ideal to finish spaces with a modern minimalist design.
Dimension: BASE 270 xcm L x 6cm H TOP 200cm x 5.5cm H
Dimension: 2.7 metres Base 6cm H & Top 5.5cm
Click to view product
See below for matching corner element P4020A. Match with PX120 dado rail, C213, C217 coving and SX122 skirting board. (also available in flexible material).
Dimension: 2m (L) x 50mm (H) x 30mm (P)
Please note that each cushion will look slightly different as they are hand-cut from the fabric yardage.
NOTE: PLEASE allow up to 3 weeks delivery if this item is not in stock. We will notify you if this is the case.
Dimension: 42 x 42 cm
Click to view product
.jpg)
.jpg)
.jpg)
23040 23041 23042
Dimension: 70 cm (H) x 50 cm (W) x 200 cm (L)
Click to view product
Skirting BI 700 (BI1000 no corner joins joints are mitred)
Skirting BI700 Silver Anodised Interlocking Aluminium H 7cm (also available in H 10cm)
This skirting anodised aluminium profile is easy to install and allows one to cover and protect low running cables over the perimeter providing an elegant finish to low wall corners. The internal interlocking support piece is fixed to the wall with screws or glued.
This profile is ideal for office environment or home for both aesthetic requirements and for telephone and computer wire passage.
| H=cm | Finish | Product Code |
| 7cm | Silver Anodised Aluminium | BI 700 ASN |
| 10cm | Silver Anodised Aluminium | bi 1000 ASN |
| Supports | BIS 20 ANF |
This anodised aluminium profiles has a silver coating. Good tolerance to oxidation and to mechanical impacts. Relevant pre-drilled interlock-pieces (2 pcs per meter) to be purchased separately, code BIS 20 ANF. Available junctions and end-plugs in synthetic resin Silver colour. This skirting board is also available powder coated with RAL colour reference.
This anodised aluminium profile has a silver coating. Good tolerance to oxidation and to mechanical impacts. Relevant pre-drilled interlock-pieces (2 pcs per meter) to be purchased separately, code BIS 20 ANF. Available junctions and end-plugs in synthetic resin Silver colour. This skirting board is also available powder coated with RAL colour reference.
.jpg)
Material: Extruded Anodised Aluminium
Colour: Silver
Length: 2.00 metres
End-caps, internal and external junctions in synthetic resin with the same Silver colour, to make proper and neat junctions. Available in 7cm height.
Material: Polypropylene
Colour: Silver
Height: 7cm
Dimension: 2.00 metres L x (7cm H) & (10cm H)
Dimension: 2.7 metre lengths - 7cm & 10cm H
Click to view product
This water-resistant and paintable cover skirting is ideal for renovations. Designed to be installed on top of existing skirting boards (1.4 x 9.9 cm max.). Old or damaged skirting boards that are difficult to remove are obstacles no more.
.png)
.png)
Cover Skirting Installation Guide
Browse our Catalogue
Duropolymer Data Sheet - our products are waterproof for indoor and exterior use
SX186 Technical Drawing
For more information call (09) 9097858 / 02108066077
Cover Skirting available in two more styles
.png)
.png)
.png)
Dimension: L 200 x H 13.8 x W 2.2 cm
.png)
See below for matching corner profile elements Match with P8030/C , P8030/D dado rail, C213, C217 and SX118 skirting board.
Dimension: 2m (L) x 40mm (H) x 15mm (P)
Choose from Crème, Red or Teal Prints or see Pink/Aqua. You may also coordinate with our Spring Garden available here and order lampshades to match here
NOTE: PLEASE allow up to 4 weeks delivery if this item is not in stock. We will notify you if this is the case.
Dimension: 42 x 42 cm
Click to view product
BA-Range
Skirting BA-AS Silver Anodised Aluminium
Available in three heights, 4.5cm , 6cm , 8cm , 10cm
This anodised aluminium profile has a silver coating. Good tolerance to oxidation and to mechanical impacts. This skirting is also available in self-adhesive option of a quicker installation.
| H=cm | Finish | Profile Code |
| 4.5cm | Silver Anodised Aluminium | BA 450 ASN |
| 4.5cm | Silver Anodised Aluminium | BA 450 ASA |
| 6cm | Silver Anodised Aluminium | BA 600 ASN |
| 6cm | Silver Anodised Aluminium | BA 600 ASA |
| 8cm | Silver Anodised Aluminium | BA 800 ASN |
| 8cm | Silver Anodised Aluminium | BA 800 ASA |
| 10cm | Silver Anodised Aluminium | BA 1000 ASN |
| 10cm | Silver Anodised Aluminium | BA 1000 ASA |
.jpg)
.jpg)
Material: Extruded Anodised Aluminium
Colour: Silver
Length 2.70 metres
Height: 4.5cm , 6cm , 8cm , 10cm
Available junction and end-caps in synthetic resin Silver colour for BA 6cm / 8cm H skirtings.
| Joint | Finish | Profile Code |
| External Corner | Anodised Silver | BAE AS |
| Internal Corner | Anodised Silver | BAI AS |
Material: Polypropylene
Colour: Silver
Height: 4.5cm , 6cm , 8cm , 10cm
| H=cm | Finish | Profile Code |
| 6cm | Corten | BA 600 A60 |
| 6cm | Micaceous Grey | BA 600A50 |
Material: Extruded Powder Coated Aluminium
Length: 2.00 metres
Colour: , Micaceous Grey , Corten
Height: 6cm
Dimension: 200cm L x (4.5cm H) : (6cm H) : (8cm( H) : (10cm H)
Dimension: 2.7 metre lengths - Various Heights 450 / 600 / 800 /1000mm
Click to view product
.png)
Contemporary modern cornice styling - click thumbnail for further info and example roomset images. Made with recessed 'shadow line' at back of cornice which gives a wonderful 'floating' illusion. Match with P5051 dado rail and SX104 skirting board or contemporary stacked cornices.
Use Quick Links to the Accessories Menu to order adhesives.
Dimension: 2m (length) x 3cm (max thickness) x 16.5cm (projection)
Cover only is sold to facilitate ease of shipping.
NOTE: PLEASE allow up to 3 weeks delivery if this item is not in stock. We will notify you if this is the case.
Dimension: 42 x 42 cm
Click to view product
Asymetric, anodized aluminium LED profile which is dedicated for build-in into the wood structure walls and direct the LED light to the floor.
Available in 2 metre lengths
Dimension: 200 (L) x 70 (H) x 16 (W) cm
BAR
| Height= cm | Profile Code |
| 6cm | BAR 600 ASN |
| 6cm | BAR 600 ASA |
This anodised aluminium profile has a silver coating. Good tolerance to oxidation and to mechanical impacts. This skirting board is also available in the self-adhesive option for a quicker installation.
.jpg)
Material: Extruded Anodised Aluminium
Colour: Silver
Length: 2 metres
Height: 6cm
| Description | Profile Code |
| Internal Corner | BAI*PS |
| External Corner | BAE*PS |
End caps, internal and external junctions in synthetic resin with the same silver colour to make proper and neat junctions. Available in 6cm height.
Material: Polypropylene
Colour: Silver
Height: 6cm
Dimension: Length 200cm Height 6cm
Dimension: L2.7m x H6cm
Click to view product
The pure shape and perfect proportions of this smallest High Line skirting board create an ideal transition between floor and wall. Whichever style of interior you have.
.png)
Skirting Installation Guide
Browse our Catalogue
Duropolymer Data Sheet - our products are waterproof for indoor and exterior use
SX187 Technical Drawing
For more information call (09) 9097858 / 02108066077
Available in two more sizes . . .
.png){kind=small}
.png)
Dimension: L 200 x H 7.5 x W 1.2 cm
.jpg)
Cover only is sold to facilitate ease of shipping.
NOTE: PLEASE allow up to 3 weeks delivery if this item is not in stock. We will notify you if this is the case.
Dimension: 42 x 42 cm
Click to view product
Asymetric, anodized aluminium LED profile which is dedicated for build-in into the wood structure walls and direct the LED light to the floor.
Available in 2 metre lengths
Dimension: 200 (L) x 70 (H) x 16 (W) cm
| H=cm | Finish | Product Code |
| 6cm | Polished Stainless Steel not self-adhesive | BA 600 ILN |
| 6cm | Polished Stainless Steel self-adhesive | BA 600 ILA |
| 8cm | Polished Stainless Steel not self-adhesive | BA 800 ILN |
| 8cm | Polished Stainless Steel self-adhesive | BA 800 ILA |
Material:
Polished Stainless Steel: AISI 304
Length: 2.7 metres
Height: 6cm: 8cm
Available PVC junctions and end-caps in stainless steel colour.
| Internal Corner | BAI-PA |
| External Corner | BAE-PI |
| End-cap | BAT-PI |
Dimension: 2.7 metres L x 6cm or 8cm H Depth 1cm
Click to view product
Dimension: L2.7 metres H 6cm & 8cm
Click to view product
.jpg)
One of the smaller examples of our contemporary cornice range - click picture for further info example roomset images. Matches with skirting board SX104 and panel railing P5051.
For an innovative twist combine this cornice with ultra contemporary Decor Rail. The Deco Rail system provides a functional way of draping curtains and hanging pictures invisibly supported from behind the cornice. No longer will hanging frames damage your walls, suitable for loads from 4 - 20kg.
Use Quick Links to the Accessories Menu to order adhesives.
Dimension: 2m (length) x 2cm (max thickness) x 10cm (projection)
Cover only is sold to facilitate ease of shipping.
NOTE: PLEASE allow up to 3 weeks delivery if this item is not in stock. We will notify you if this is the case.
Dimension: 42 x 42 cm
Click to view product
BA 400
Skirting BA 400A
Innovative skirting in metal designed to satisfy the minimalist taste in design, where the skirting performs its function while integrating in the interior design discretely and effectively.- sharp angles
- squared cross section
- height reduced to 4cm
The profile is equipped with a hollow on the invisible side which serves to glue it. The profile is equipped with joints and special pieces with the same minimalist visual effect.
.jpg)
.jpg)
.jpg)
FINISHES
|
|
|
Skirting BAS ASN Silver Anodised Aluminium
This anodised aluminium profile has a silver coating. Good tolerance to oxidation and to mechanical impacts. Universal external corner, internal corner and end cap.
Dimension: L2.7 metre lengths - Heights 4 - 6 - 8cm
Click to view product
.png)
Cornice lighting trough ref C357 - mouse-over cornice image for product dimensions (cm's), and see light fitting options below.
Use Quick Links to the Accessories Menu to order adhesives.
See here for technical details and installation instructions
Indirect Lighting Brochure
Dimension: L: 200cm x H: 7.5 x W: 11cm
NOTE: PLEASE allow up to 3 weeks delivery if this item is not in stock. We will notify you if this is the case.
Dimension: 42 x 42 cm
Click to view product
Skirting BIB/BI 800
Aluminium or PVC wall skirting boards fixed with glue, screws or invisible nails. It is easy to install for an elegant and lasting finish. The profile contoured ends give a snug fit on the wall covering over the bottom perimeter along the dilation gap joint ensuring necessary expansion movement to the floor.
A two-part skirting consisting of a silver anodised aluminium base with decorative top section. The base section fixes directly to the wall (with mechanical or adhesive fixing) and allows the concealment of low voltage cables, in addition to offering durability and resistance from damp. The top section is available in a range of wood and metal effect decorative finishes and clips in to the base, covering the fixing.
Interlocking in Aluminium / Aluminium and Aluminium / Wood Bicolour effect.
RAL Powder Coating available on request minimum order 200 metres.
.jpg)
The base, available only in silver finish is conceived to match both the aluminium and the solid wood TOPS. Available junctions and end plugs in synthetic resin Silver colour.
| H=cm | Finish | Product Code |
| 5cm | Aluminium Silver |
BIB 800 ASN |
Material: extruded anodised aluminium
Length: 2 metres
Base Height: 5cm
Complete skirting Height 8cm
.jpg)
| H=cm | Finish | Product Code |
| 3cm | TOP Silver Aluminium | BI 800 ANS |
| 3cm | TOP Aluminium Anthracite | BI 800 A 50 |
| 3cm | TOP Solid Oak Gloss Painted | BI 800 RO |
| 3cm | TOP Solid Oak - natural finish | BI 800 RON |
The top section interlocks with the fixing base in silver anodised aluminium. This skirting board composed of two separate elements allows creation of a totally innovative dual coloured effect.
.jpg)
.jpg)
Installation Guidelines:
- screw of glue the base to the wall
- place the provided seal into the semicircular gap every 40cm
- insert the finishing top
Length: 2 metres
TOP Height: 3cm
Complete Skirting Height: 8cm
| Profile | Product Code |
| Internal Corner | BII800PS |
| External Corner | BIE800PS |
| End-cap | BIT800PS (Packed in a set 1R + 1L) |
.jpg)
Dimension: 200cm L x 8cm H (BASE 5cm & TOP 3cm) Depth 1.8cm
Dimension: 2.7 metre lengths Base 5cm H & Top 3cm H
Click to view product
.png)
Uplighter Coving C901 lighting trough (a slightly smaller version of the above) - flexible version min radius 3.8m. Click here for application image of cornice fitted 'normally' (with additional panel mouldings P4020 & P7020) Match with C900, C902 coving, P8020, P8030 dado rail and SX118, SX156 skirting board.
See here for technical details and installation instructions
Indirect Lighting Brochure
Use Quick Links to the Accessories Menu to order adhesives.
Dimension: 2m (L) x 150mm (H) x 125mm (P)
NOTE: PLEASE allow up to 3 weeks delivery if this item is not in stock. We will notify you if this is the case.
Dimension: 42 x 42 cm
Click to view product
BT
Skirting BT (Available in AS Silver Anodised Aluminium & ASB Bright Polished Aluminium Chrome Effect)
Minimal profile in aluminium conceived for skirting with low thickness or vitreous mosaic coverings. The profile contoured ends give a snug fit on the wall covering over the bottom perimeter along the dilation gap joint, thus ensuring the necessary expansion movement to the floor and hiding any defects in cutting of the skirting material / tile. Can be used as a base or base & cap.
| H=cm | Finish | Product Code |
| 4.5cm | Silver Anodised Aluminium | BT 45 AS |
| 4.5cm | Bright Polished Aluminium Chrome Effect | BT 45 ASB |
BT 45 AS Silver Anodised Aluminium
A silver coated aluminium profile which offers adequate protection and tolerance to wear over time.
Material: Extruded Anodised Aluminium
Colour: Silver
Length: 2.7 metres
BT 45 ASB Bright Polished Aluminium -Chrome Effect
The surface of this anodised aluminium profile has been chrome -effect treated in order to give that sparkling effect in combination sith bathroom ware. It holds the same properties as the other aluminium models.
Material: Extruded Anodised Aluminium
Colour: Bright Coloured Chrome
Length: 2.7 metres
Dimension: 2.7m L x 4.5cm W
Dimension: 2.7m lengths - 4.5cm H
Click to view product
Dimension: L 200 x H 2 x W 1 cm Duropolymer® ‎
Click to view product
.jpg)
No sanding, pre-primed, much faster no plaster, look at the price!!!
For an innovative twist combine this cornice with ultra contemporary Deco Rail. The Deco Rail system provides a functional way of draping curtains and hanging pictures invisibly supported from behind the cornice. No longer will hanging frames damage your walls, suitable for loads from 4 - 20kg.
Use Quick Links to the Accessories Menu to order adhesives.
Dimension: L: 200 cm H: 4 cm W: 3.5 cm
NOTE: PLEASE allow up to 3 weeks delivery if this item is not in stock. We will notify you if this is the case.
Dimension: 42 x 42 cm
Click to view product
BIM 800 Base & Top
| H = cm | Finish | Profile Code |
| 5cm | Aluminium Silver | BIM 800 ASN |
| H= cm | Finish | Profile Code |
| 3cm | Aluminium Silver | BI 800 ASN |
| 3cm | Aluminium Micaceous Grey | BI 800 A 50 |
Material: Extruded anodise aluminium
Colour: Silver
Length: 2m
Base Height: 5cm
Top Height: 3cm
Complete skirting height: 8cm
Dimension: Base 200cm L x 5cm H Top 200cm L x 3cm H
Dimension: 2.7 metre lengths - Top 4cm H & Base 5cm H
Click to view product
The flexible version of the SX194. The SX194 is our smallest and simplest profile and is part of the SQUARE family. This multifunctional profile can be used as panel moulding to finish a wainscoting or as a skirting board to create a subtle transition between floor and wall. Flex Radius: R min = 25 R* min = 80 cm
Dimension: L 200 x H 2 x W 1 cm Flex ‎
.jpg)
No sanding, pre-primed, much faster no plaster, look at the price!!!
For an innovative twist combine this cornice with ultra contemporary Decor Rail. The Deco Rail system provides a functional way of draping curtains and hanging pictures invisibly supported from behind the cornice. No longer will hanging frames damage your walls, suitable for loads from 4 - 20kg.
Use Quick Links to the Accessories Menu to order adhesives.
Dimension: L: 200 cm H: 6 cm W: 5 cm
NOTE: PLEASE allow up to 3 weeks delivery if this item is not in stock. We will notify you if this is the case.
Dimension: 42 x 42 cm
Click to view product
.jpg)
.jpg)
.jpg)
.jpg)
The SX195 HAMBURG is a timeless skirting board. Its unique shape with a rich history provides your wall with an elegant finish.
.png)
.png)
.jpg)
Dimension: L 200 x H 8 x W 1.9 cm Duropolymer® ‎
.jpg)
No sanding, pre-primed, much faster no plaster, look at the price!!!
For an innovative twist combine this cornice with ultra contemporary Deco Rail. The Deco Rail system provides a functional way of draping curtains and hanging pictures invisibly supported from behind the cornice. No longer will hanging frames damage your walls, suitable for loads from 4 - 20kg.
Use Quick Links to the Accessories Menu to order adhesives.
Dimension: L: 200 cm H: 7 cm W: 7 cm
Our original Peacock Party design is hand-printed with water-based, toxic-free inks on 100% natural European eco-friendly linen. The back of the cushion cover is unprinted.
Cushion cover measures approx. 42 x 42 cm (16.5 x 16.5 inches). Looks best with 45 x 45 cm insert (18 inches). To facilitate shipping, we only sell the covers.
Our cushions may be custom-made to any size. Please contact us for a quote.
Choose from Crème, Red or Teal Prints or see Pink/Aqua kid's cushion
NOTE: PLEASE allow up to 4 weeks delivery if this item is not in stock. We will notify you if this is the case.
Dimension: 42 x 42 cm
Click to view product
.jpg)
The flexible version of the SX195. The SX195 HAMBURG is a timeless skirting board. Its unique shape with a rich history provides your wall with an elegant finish. Flex Radius: R min = 30 cm
Dimension: L 200 x H 8 x W 1.9 cm Flex ‎
No sanding, pre-primed, much faster no plaster, look at the price!!!
For an innovative twist combine this cornice with ultra contemporary Decor Rail. The Deco Rail system provides a functional way of draping curtains and hanging pictures invisibly supported from behind the cornice. No longer will hanging frames damage your walls, suitable for loads from 4 - 20kg.
Use Quick Links to the Accessories Menu to order adhesives.
Dimension: L: 200 cm H: 7 cm W: 7 cm
Choose from Crème, Red or Teal Prints or see Pink/Aqua kid's cushion
Dimension: 42 x 42 cm
Click to view product
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
SX206 is the tallest heritage skirting profile in the Heritage range, designed to create strong classical base detailing in traditional and restoration-focused interiors. With refined period proportions, it provides a defined wall-to-floor transition suited to heritage homes and high-ceiling spaces. Part of the Heritage collection — including SX206, SX118 and SX165 — it allows architects and specifiers to maintain consistent classical skirting across varying room scales. Manufactured from water-resistant Duropolymer® and supplied pre-primed, SX206 offers greater dimensional stability than MDF while supporting long-term performance in humid interior environments..png)
Dimension: Dimensions: 200 x 18 x 1.8cm
.jpg)
Dimension: L 200 x H 2 x W 1 cm Duropolymer® ‎
Introducing our new low budget Basixx cornice range. Elegant and affordable the Basixx range is minimalistic and contemporary, great for a fast makeover.
Using standard tools Durofoam cuts easily and is fixed and joined using our adhesive range.
No sanding, pre-primed, much faster no plaster, look at the price!!!
Dimension: L: 200 cm H: 6 cm W: 4 cm
Choose from Crème, Red or Teal Prints or see Pink/Aqua kid's cushion
Dimension: 42 x 42 cm
Click to view product
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
SX207 SQUARE is the largest contemporary skirting board in the SQUARE family, delivering bold, minimalist base detailing for modern interiors. With its clean square-edge profile, SX207 creates a strong architectural line suited to residential, multi-residential and commercial projects. The SQUARE collection — including SX207, SX171, SX168, SX163, SX165 and SX162 — offers multiple height options, allowing architects and designers to maintain consistent contemporary skirting throughout a project while adjusting scale to suit each space. Manufactured from durable, water-resistant Duropolymer®, SX207 provides greater dimensional stability than MDF and is suitable for humid interiors. It can also be used creatively as a 3D wall element, panel frame, cornice or border, and is available in flexible material (along with SX163, SX165, SX162 and SX194) for curved wall applications.
Dimension: Dimensions: 200 x 25 x 1.3cm
Our original French Stripes design is hand-printed with water-based, toxic-free inks on 100% natural, yarn-dyed European linen. The back of the cushion cover is unprinted.
Cushion cover measures approx. 42 x 42 cm (16.5 x 16.5 "). Looks best with 45 x 45 cm insert (18 x 18 "). To facilitate shipping, we only sell the covers.
Our cushions may be custom-made to any size. Please contact us for a quote.
Zipper allows for easy removal and cleaning. Gentle machine wash or dry clean. Fabric is pre-washed and pre-shrunk.NOTE: PLEASE allow up to 4 weeks delivery if this item is not in stock. We will notify you if this is the case.
Dimension: 42 x 42 cm
Click to view product
Wallprotection
.jpg)
.jpg)
.jpg)
.jpg)
Dimension: 2.7 metre Lengths 100mm H
Dimension: 2.7 metre Lenghts 100mm H
Click to view product
Our original French Stripes design is hand-printed with water-based, toxic-free inks on 100% natural, yarn-dyed European linen. The back of the cushion cover is unprinted.
Cushion cover measures approx. 42 x 42 cm (16.5 x 16.5 "). Looks best with 45 x 45 cm insert (18 x 18 "). To facilitate shipping, we only sell the covers.
Our cushions may be custom-made to any size. Please contact us for a quote.
Zipper allows for easy removal and cleaning. Gentle machine wash or dry clean. Fabric is pre-washed and pre-shrunk.NOTE: PLEASE allow up to 4 weeks delivery if this item is not in stock. We will notify you if this is the case.
Dimension: 42 x 42 cm
Click to view product
.png)
Each napkin measures 34 x 34 cm (13.3 square inches).
Dimension: 34 x 34 cm
Click to view product
Plano BF
.png)
.png)
.jpg)
Dimension: L270cm x H6cm
Click to view product
The French Stripes napkins are inspired by a love for French style. Stripes are a hand-cut design.
Sold as Set of 4 and gift-wrapped with cotton Baker's Twine.
Linen is a beautiful natural fibre known for its great absorption qualities. Each napkin measures 34 x 34 cm (13.3 square inches).
Napkins are made in Eastern Europe and hand-printed in Australia using water-based, solvent free inks.
Machine washable. Expect some shrinkage after first wash.
Dimension: 34 x 34 cm
Click to view product
Plano BFW
Designed to be used with plasterboard, these profiles allow a flush finish with wall skirting boards and, in some cases, with the same material used for flooring.
Plano BF is a patented integrated to wall skirting board, consisting of a support piece and a finishing (interlocking) piece in wood or aluminium. The profile, which remains invisible, acts as a support that allows the gluing of the skirting board element and is compatible with the most common plasterboard sections.
Available in 3 styles. The PLANO BFW 1000/130 skirting board has a groove at the end of laying that allows the application of a LED strip.
.png)
.png)
Dimension: 2.7 metre lengths - Heights 6cm and 10cm Widths 13mm - 13.5mm - 22mm
Click to view product
The French Stripes napkins are inspired by a love for French style. Stripes are a hand-cut design.
Sold as Set of 4 and gift-wrapped with cotton Baker's Twine.
Linen is a beautiful natural fibre known for its great absorption qualities. Each napkin measures 34 x 34 cm (13.3 square inches).
Napkins are made in Eastern Europe and hand-printed in Australia using water-based, solvent free inks.
Machine washable. Expect some shrinkage after first wash.
Dimension: 34 x 34 cm
Click to view product
PS130
Drywall is the most commonly used material in modern residential and commercial construction. PLANO PS130, a new, one-of-a-kind profile elegantly finishes drywall ceiling and wall installations. Its discreet, 33/64''x33/64'' (13x13mm) profile section perfectly edges drywall panels, becoming a minimalist design feature. At the floor level, the profile connects with the PLANO DESIGN BF baseboard for a fully integrated installation. The result is a profile that leaves a small gap of negative space, almost suspending the wall in mid-air.
Dimension: L270cm x H1.3cm
Click to view product
Set of 5 low energy LED's (1 LED = 0.2W), plus 5 x 1m extension cables. Requires transformer IL003-012 (below)
4cm x 9mm
Dimension: 4cm x 9mm
ORDER IN 25 cm (1/4 metre) increments. So if you want 1 metre - you will order 4 units. Fabric will always be cut as one continuous piece. 1 metre = 39.4 inches.
Dimension: 150 cm (W)
Click to view product
Xinnix recessed lighting fixture - for MycroLynx F7W or LED bulbs (not incl)
Dimension: 10 x 10 x 9cm
Hand-printed on European white linen. This fabric has been pre-washed and pre-shrunk by the manufacturer. Inks used are water-based and solvent-free.
Printed design width is 138 cm (54.3 inches) fabric width = 150 cm (59 inches).
Dimension: 150 cm (W) x 1m (L)
Xinnix recessed fixture for energy saving light (not incl)
Dimension: 19.5 x 34 x 8.5 cm
Hand-printed on European white linen. This fabric has been pre-washed and pre-shrunk by the manufacturer. Inks used are water-based and solvent-free.
Printed design width is 138 cm (54.3 inches)
Fabric width = 150 cm (59 inches).
Dimension: 150 cm (W) x 1m (L)
Uplighter Coving C900 lighting trough - use lighting systems below for a beautiful creative warm glow on the ceiling - 2m lengths. Click here to see application as a 'normal' cornice (not uplighting). Match with C901, C902 coving, P8020, P8030 dado rail and SX118, SX156 skirting board.
See here for technical details and installation instructions
Indirect Lighting Brochure
Use Quick Links to the Accessories Menu to order adhesives.
Dimension: 2m (L) x 170mm (H) x 145mm (P
Hand-printed on European white linen. This fabric has been pre-washed and pre-shrunk by the manufacturer. Inks used are water-based and solvent-free.
Printed design width is 138 cm (54.3 inches)
Fabric width = 150 cm (59 inches).
Dimension: 1m (L) x 150 cm (W)
Uplighter Coving C901 lighting trough (a slightly smaller version of the above) - flexible version min radius 3.8m. Click here for application image of cornice fitted 'normally' (with additional panel mouldings P4020 & P7020) Match with C900, C902 coving, P8020, P8030 dado rail and SX118, SX156 skirting board.
See here for technical details and installation instructions
Indirect Lighting Brochure
Use Quick Links to the Accessories Menu to order adhesives.
Dimension: 2m (L) x 150mm (H) x 125mm (P)
Dimension: 150 cm (W) x 1m (L)
Click to view product
Orac Decor coving/cornice lighting trough - install 15-20 cm from ceiling for full room surround lighting effect. "Mouse over" picture for profile dimensions (cm's). Light fitting options can be found further down in the product list.
Use Quick Links to the Accessories Menu to order adhesives.
See here for technical details and installation instructions
Indirect Lighting Brochure
Dimension: L: 2m x H: 8cm x W: 17.5cm
Printed design width is 138 cm (54.3")
Fabric width = 145 cm (57 inches)
Weight = 400 gsm (11.8 oz/yard). Ideal for upholstery, blinds, making bags and other decorating projects.
Dimension: 145cm (W) x 1m
Click to view product
Flexible version of the SX184. This multifunctional skirting board with rounded top provides endless possibilities. Thanks to its Flex technology, curved walls and surfaces are no problem. Installation remark: It is necessary to screw this profile on the wall. Flex Radius: R min = 45 cm
.png)
Courtesy - SX184F Beyond Project Management
Installation Guide
Available in three sizes.
.png)
SX182F(3).png)
SX183F
L 200 X H 7.5 X W 1.3 CM DURSX182FOPOLYMER® - ALSO AVAILABLE IN RIGID
Dimension: L 200 x H 11 x W 1.3 cm
Click to view product
.jpg)
Cornice lighting trough ref C357 - mouse-over cornice image for product dimensions (cm's), and see light fitting options below.
Use Quick Links to the Accessories Menu to order adhesives.
See here for technical details and installation instructions
Indirect Lighting Brochure
Dimension: L: 200cm x H: 7.5 x W: 11cm
Printed design width is 138 cm (54.3")
Fabric width = 145 cm (57 inches)
Weight = 400 gsm (11.8 oz/yard). Ideal for upholstery, blinds, making bags and other decorating projects.
Dimension: 145cm (W) x 1m
Click to view product
Indirect uplighting cornice ref C358 - mouse-over image for cornice dimensions (cm's). For lights, see below.
Use Quick Links to the Accessories Menu to order adhesives.
See here for technical details and installation instructions
Indirect Lighting Brochure
Dimension: L: 2m x H: 7.5cm x W: 14cm
Printed design width is 138 cm (54.3")
Fabric width = 145 cm (57 inches)
Weight = 400 gsm (11.8 oz/yard). Ideal for upholstery, blinds, making bags and other decorating projects.
Dimension: 145cm (W) x 1m
Click to view product
Orac Decor coving/cornice lighting trough - install 15-20 cm from ceiling for full room surround lighting effect. "Mouse over" picture for profile dimensions (cm's).
Use Quick Links to the Accessories Menu to order adhesives.
See here for technical details and installation instructions
Indirect Lighting Brochure
L: 2m x H: 7.5cm x W: 17cm
Dimension: L: 2m x H: 7.5cm x W: 17cm
- Printed design width is 138 cm (54.3")
- Fabric width = 145 cm (57 inches)
- Weight = 400 gsm (11.8 oz/yard). Ideal for upholstery, blinds, making bags and other decorating projects.
- Horizontal Repeat = 38.5 cm. Vertical Repeat = 38 cm. Height of tallest flower is 19.5 cm.
Dimension: 138cm (W) x 1M
Click to view product
Multi - purpose skirting / architrave, contemporary styling. Match with panel moulding PX 164, PX 147 and cornice CX161.
Arhitraves mix and match profiles, overlay and centre PX144 on DX163-2300.
Imact and water resistant, great for bathrooms and wet areas.
100% recyclable
Dimension: L:230cm x H:10cm x W:1.3cm
- Printed design width is 138 cm (54.3")
- Fabric width = 145 cm (57 inches)
- Weight = 400 gsm (11.8 oz/yard). Ideal for upholstery, blinds, making bags and other decorating projects.
- Horizontal Repeat = 38.5 cm. Vertical Repeat = 38 cm. Height of tallest flower is 19.5 cm.
Dimension: 138cm (W) x 1M
Click to view product
Add the touch of warmth and beauty to any fireplace with ORAC DECOR® Mantel Pieces. Primed and ready for painting, these Mantel Pieces are certain to transform ordinary, unembellished Fireplaces and Hearths. See here for dimensions and fitting guidelines. Match with P9010, P8050 dado rail, R09 ceiling rose and SX118 skirting board.
Hand-wash or gentle-machine washable. Furniture may be steam-cleaned.
Choose from Black, White, Red or Cottage Blue Prints on Natural Upholstery
Click to view product
Match with PX120/A corner piece, CX100 coving, R07 ceiling rose and SX122 skirting board.
Dimension: 2m (L) x 40mm (H) x 20mm (P)
Hand-wash or gentle-machine washable. Furniture may be steam-cleaned.
Choose from Black, White, Red or Cottage Blue Prints on Natural Upholstery
Dimension: 140cm (W) x 1M
Click to view product
A simple cove with attractive 'cut-out' along the bottom length. 4.5cm x 4.5cm (click image for enlarged picture). Install with Decofix Pro (fixing adhesive/filler) and Extra Fix (for ultra high strength joint bonding). Match with CX126 coving, PX120 or PX113 dado rail, R08 ceiling rose and SX125 skirting board.
Dimension: 2m (L) x45mm (H) x45mm (P)
Hand-wash or gentle-machine washable. Furniture may be steam-cleaned.
Choose from Black, White, Red or Cottage Blue Prints on Natural Upholstery
Dimension: 140cm (W) x 1M
Click to view product
A simple, elegant shape - coving ref CX110, 4cm x 4.5cm (move over image for enlarged picture). Install with Decofix Pro (fixing adhesive/filler) and Extra Fix (for ultra high strength joint bonding). Match with CX148, CX124 coving, PX120 dado rail, R07 ceiling rose and SX122 skirting board.
For an innovative twist combine this cornice with ultra contemporary Deco Rail. The Deco Rail system provides a functional way of draping curtains and hanging pictures invisibly supported from behind the cornice. No longer will hanging frames damage your walls, suitable for loads from 4 - 20kg.
Use Quick Links to the Accessories Menu to order adhesives.
Dimension: 2m (L) x45mm (H) x40mm (P)
Printed design width is 138 cm (54.3 inches)
Fabric width = 145 cm (57 inches).
Dimension: 145cm (W) x 1M
Click to view product
.png)
One of our most popular coving patterns, match with PX120 dado rail, R07/08/09 ceiling roses and SX137 skirting board.
Dimension: 2m/2.6m (L) x 70mm (H) x 70mm (P)
Hand-printed on European Upholstery-weight Natural linen. This fabric has been pre-washed and pre-shrunk by the manufacturer. Inks used are water-based and solvent-free.
Printed design width is 138 cm (54.3 inches)
Fabric width = 145 cm (57 inches).
Dimension: 145cm (W) x 1M
Click to view product
Hand-wash or gentle-machine washable. Furniture may be steam-cleaned.
Choose from Black, White, Red or Cottage Blue Prints on Natural Upholstery
Dimension: 140cm (W) x 1M
Click to view product
Multi purpose skirting or architrave, impact and water resistant. Match with PX 147 panelling, trim with DX162-2300, PX113 panel rail and SX118 skirting.
Dimension: L: 230cm x H: 6.5cm x W:1.3cm
Printed fabric width is 140 cm (55"). Height of each including stalk is 11 cm or 4.5 inches tall. largest flower is 7.5 cm or 3 inches wide.
Dimension: 140cm (W) x 1M
Click to view product
Match with CX115, CX111 coving, PX103, PX116 dado rail and SX155 skirting board.
Dimension: 2m (L) x30mm (H) x30mm (P)
- Fabric weight is 265 gsm. Printed fabric width is 138 cm (54.3"). Width of fabric is 150 cm (59"). Vertical Repeat is 49.5 cm (19.5") and Horizontal Repeat is 47.5 cm (18.7")
- Hand-wash or gentle-machine washable.
Dimension: 138cm (W) x 1M
Click to view product
Trim in contemporary styling. Great cable conduit.
Match with panel moulding PX 147 and cornice CX161. Wainscoting, combine with DX157-2300, DX162-2300.
100% recyclable, impact, insect and water resistant, great for bathrooms and wet areas.
Dimension: 200 x 2.5 x3 cm
Printed fabric width is 140 cm (55"). Height of each including stalk is 11 cm or 4.5 inches tall. largest flower is 7.5 cm or 3 inches wide.
Dimension: 140cm (W) x 1M
Click to view product
Larger version of our very popular CX100 cove. 9.5cm x 9.5cm (click image for enlarged picture). Install with Decofix Pro (fixing adhesive/filler) and Extra Fix (for ultra high strength joint bonding). Match with CX128 coving, PX120 or PX113 dado rail, R09 ceiling rose and SX137/SX138 skirting board.
Dimension: 2m (L) x95mm (H) x95mm (P)
Printed fabric width is 140 cm (55"). Height of each including stalk is 11 cm or 4.5 inches tall. largest flower is 7.5 cm or 3 inches wide.
Dimension: 140cm (W) x 1M
Click to view product
One of our most popular coving patterns, match with PX120 dado rail, R07/08/09 ceiling roses and SX137 skirting board.
Dimension: 2m/2.6m (L) x 70mm (H) x 70mm (P)
- Printed fabric width = 139 cm (54.7"). Fabric width = 145 cm (57 inches).
- Height of peacocks is 9.5 cm (3.75).
- Fabric Weight = 400 gsm (11.8 oz/yard). Ideal for upholstery, blinds, making bags and other decorating projects.
Dimension: 139cm (W) x 1M
Click to view product
Match with PX120/A corner piece, CX100 coving, R07 ceiling rose and SX122 skirting board.
Dimension: 2m (L) x 40mm (H) x 20mm (P)
- Printed fabric width = 139 cm (54.7"). Fabric width = 145 cm (57 inches).
- Height of peacocks is 9.5 cm (3.75).
- Fabric Weight = 400 gsm (11.8 oz/yard). Ideal for upholstery, blinds, making bags and other decorating projects.
Dimension: 139cm (W) x 1M
Click to view product
Plain coving style with very thin edging that can be feathered in to wall & ceiling. 9cm x 9cm (move over image for enlarged picture). Install with Decofix Pro (fixing adhesive/filler) and Extra Fix (for ultra high strength joint bonding). Match with CX109 coving, PX102, PX144 dado rail, R72 ceiling rose and SX125 skirting board.
For an innovative twist combine this cornice with ultra contemporary Deco Rail. The Deco Rail system provides a functional way of draping curtains and hanging pictures invisibly supported from behind the cornice. No longer will hanging frames damage your walls, suitable for loads from 4 - 20kg.
Use Quick Links to the Accessories Menu to order adhesives.
Dimension: 2m (L) x90mm (H) x90mm (P)
Dimension: 150 cm (W) x 1M
Click to view product
Match with PX102 dado rail, CX109 coving, R08 ceiling rose and SX125 skirting board.
Dimension: 2m (L) x 180mm (H) x 100mm (P)
- Height & width of each iron flower is 7 cm (2.75 inches). Printed width is 138 cm (54 1/4").
- Fabric weight is 265 gsm (9 oz). Fabric width is 150 cm (59 inches). Ideal for homewares, cushions and upholstery.
Dimension: 150 cm (W) x 1M
Click to view product
Multi - purpose skirting / architrave / cornice, contemporary styling. Match with panel moulding PX116 PX103 and cornice CX161.
Imact and water resistant, great for bathrooms and wet areas.
100% recyclable
230 x 6 x 1.2 cm
Dimension: L: 230 x H: 6 x W: 1.2 cm
- Height & width of each iron flower is 7 cm (2.75 inches). Printed width is 138 cm (54 1/4").
- Fabric weight is 265 gsm (9 oz). Fabric width is 150 cm (59 inches). Ideal for homewares, cushions and upholstery.
Dimension: 150 cm (W) x 1M
Click to view product
Our most popular Axxent coving profile ever, and as featured on makeover TV shows. 12cm x 12cm (move over image for enlarged picture). Install with Decofix Pro (fixing adhesive/filler) and Extra Fix (for ultra high strength joint bonding). See here for use of CX106 as both coving and skirting board. Match with CX107 coving, PX120, PX116 dado rail, R40 ceiling rose and SX137 skirting board.
Dimension: 2m (L) x120mm(H) x120mm(P)
- Height & width of each iron flower is 7 cm (2.75 inches). Printed width is 138 cm (54 1/4").
- Fabric weight is 265 gsm (9 oz). Fabric width is 150 cm (59 inches). Ideal for homewares, cushions and upholstery.
Dimension: 150 cm (W) x 1M
Click to view product
One of our classic coving patterns. 8cm x 8cm (click image for enlarged picture). Install with Decofix Pro (fixing adhesive/filler) and Extra Fix (for ultra high strength joint bonding). See coving application example image here. Match with CX124, CX127 coving, PX120 dado rail, R09 ceiling rose and SX138 skirting board.
Dimension: 2m (L) x80mm (H) x80mm (P)
- Height & width of each iron flower is 7 cm (2.75 inches). Printed width is 138 cm (54 1/4").
- Fabric weight is 265 gsm (9 oz). Fabric width is 150 cm (59 inches). Ideal for homewares, cushions and upholstery.
Dimension: 150 cm (W) x 1M
Click to view product
Available on Special Order
Dimension: 2m (L) x 190mm (H) x 190mm (P)
Click to view product
- Fabric weight is 265 gsm. Printed fabric width is 138 cm (54.3"). Width of fabric is 150 cm (59"). Vertical Repeat is 49.5 cm (19.5") and Horizontal Repeat is 47.5 cm (18.7")
- Hand-wash or gentle-machine washable.
Dimension: 138cm (W) x 1M
Click to view product
Larger dentil version of C211 cornice - typical of Georgian era. Orac Decor coving C422. Click here for application image of C422 . Match with C219 coving, P6020, P8050 dado rail, R40 ceiling rose and SX118, SX156 skirting board.
Use Quick Links to the Accessories Menu to order adhesives.
Available on Special Order
Dimension: 2m (L) x 170mm (H) x 195mm (P)
Suitable for soft furnishings, upholstery and craft projects.
- Vertical repeat is 36.8 cm (10 1/4"). There is no horizontal repeat. This design is hand-drawn across the fabric width.
- Fabric width = 150 cm (59 inches). Weight = 265 gsm, ideal for apparel and homewares.
Dimension: 150 cm (W) x 1M
Click to view product
Match with panel moulding P4020 and P7030. Architrave DX121 and K200 with a door stop D320.
See here for technical details and installation instructions
Indirect Lighting Brochure
Available on Special Order
Suitable for soft furnishings, upholstery and craft projects.
- Vertical repeat is 36.8 cm (10 1/4"). There is no horizontal repeat. This design is hand-drawn across the fabric width.
- Fabric width = 150 cm (59 inches). Weight = 265 gsm, ideal for apparel and homewares.
Dimension: 138cm (W) x 1M
Click to view product
Flexible version of same cornice from our Decor range. Min radius 3.4m. Available in 2m lengths.
Dimension: L: 200cm x H: 10.5cm x W: 15.5cm
Suitable for soft furnishings, upholstery and craft projects.
- Vertical repeat is 36.8 cm (10 1/4"). There is no horizontal repeat. This design is hand-drawn across the fabric width.
- Fabric width = 150 cm (59 inches). Weight = 265 gsm, ideal for apparel and homewares.
Dimension: 138cm (W) x 1M
Click to view product
Extra large cornice for the maximum statement - 260mm projection x 270mm wall drop. Match with C332 coving, D120 door pediment, P8050 dado rail, R64 ceiling rose and SX118, SX156 skirting board.
Use Quick Links to the Accessories Menu to order adhesives.
Available on Special Order
Dimension: 2m (L) x 270mm (H) x 260mm (P)
Suitable for soft furnishings, upholstery and craft projects.
- Vertical repeat is 36.8 cm (10 1/4"). There is no horizontal repeat. This design is hand-drawn across the fabric width.
- Fabric width = 150 cm (59 inches). Weight = 265 gsm, ideal for apparel and homewares.
Dimension: 138cm (W) x 1M
Click to view product
Combines superbly with cornice C990 to create unique and individual designs. Match with C335, C900 cornice and SX122, SX138 skirting board. Also available in flexible material.
Available on Special Order
Dimension: 2m (L) x 70mm (H) x 15mm (P)
Suitable for soft furnishings, upholstery and craft projects.
- Vertical repeat is 36.8 cm (10 1/4"). There is no horizontal repeat. This design is hand-drawn across the fabric width.
- Fabric width = 150 cm (59 inches). Weight = 265 gsm, ideal for apparel and homewares.
Dimension: 138cm (W) x 1M
Click to view product
Our largest ornate ceiling rose - click image for larger picture. Use Decofix Pro adhesive FDP500 to install. Match with skirting SX118.
Dimension: Diameter 95.5cm
Printed fabric width is 139 cm (54.7").
Width of fabric is 150 cm (59"). Height of peacocks is 9.5 cm (3.75).
Hand-wash or gentle-machine washable. Upholstery may be steam-cleaned.
Dimension: 139 cm (W) x 1M
Click to view product
Uplighter Coving C901 lighting trough (a slightly smaller version of the above) - flexible version min radius 3.8m. Click here for application image of cornice fitted 'normally' (with additional panel mouldings P4020 & P7020) Match with C900, C902 coving, P8020, P8030 dado rail and SX118, SX156 skirting board.
See here for technical details and installation instructions
Indirect Lighting Brochure
Use Quick Links to the Accessories Menu to order adhesives.
Dimension: 2m (L) x 150mm (H) x 125mm (P)
Printed fabric width is 139 cm (54.7").
Width of fabric is 150 cm (59"). Height of peacocks is 9.5 cm (3.75).
Hand-wash or gentle-machine washable. Upholstery may be steam-cleaned.
Dimension: 139cm (W) x 1M
Click to view product
Flexible version of same cornice from our Decor range. Min radius 3.4m. Available in 2m lengths.
Available on Special Order
Dimension: L: 200cm x H: 10.5cm x W: 15.5cm
Printed fabric width is 139 cm (54.7").
Width of fabric is 150 cm (59"). Height of peacocks is 9.5 cm (3.75).
Hand-wash or gentle-machine washable. Upholstery may be steam-cleaned.
Dimension: 139cm (W) x 1M
Click to view product
One of our largest and most classical cornices. Attach corbel elements (below) every 15-20 cm's for a stunning, classic look. See life application image here. Match with C307/A, C219 coving, P8050 dado rail, R77 ceiling rose and SX118, SX156 skirting board.
Use Quick Links to the Accessories Menu to order adhesives.
Available on Special Order
Dimension: 2m (L) x 190mm (H) x 190mm (P)
Printed fabric width is 139 cm (54.7").
Width of fabric is 150 cm (59"). Height of peacocks is 9.5 cm (3.75).
Hand-wash or gentle-machine washable. Upholstery may be steam-cleaned.
Dimension: 139cm (W) x 1M
Click to view product
Traditional concave type coving (similar to standard 127mm cove). Orac Decor coving C240 (flexible version min radius 2m). Match with C213 and C990 coving, P9901 or P8030 dado rail and SX118, SX155 skirting board.
Use Quick Links to the Accessories Menu to order adhesives.
Available on Special Order
Dimension: 2m (L) x 80mm (H) x 80mm (P)
Printed fabric width is 139 cm (54.7").
Width of fabric is 150 cm (59"). Height of peacocks is 9.5 cm (3.75).
Hand-wash or gentle-machine washable. Upholstery may be steam-cleaned.
Dimension: 139cm (W) x 1M
Click to view product
Rigid or flexible version of our most popular skirting (SX118 as above) - solves all those curved wall problems! Min radius 0.4m. Available in 2m lengths.
Dimension: Height 14cm, projection 1.8cm, length 2m
Printed fabric width is 139 cm (54.7").
Width of fabric is 150 cm (59"). Height of peacocks is 9.5 cm (3.75).
Hand-wash or gentle-machine washable. Upholstery may be steam-cleaned.
Dimension: 139 cm (W) x 1M
Click to view product
See below for matching corner profile elements Match with P8030/C , P8030/D dado rail, C213, C217 and SX118 skirting board.
Dimension: 2m (L) x 40mm (H) x 15mm (P)
Iron Flowers is inspired by beautiful wrough iron lace-work.
Hand-printed on eco-friendly European linen using water-based and solvent-free inks.
Height & width of each iron flower is 7 cm (2.75 inches). Printed width is 138 cm (54 1/4").
Fabric weight is 265 gsm (9 oz). Fabric width is 150 cm (59 inches). Ideal for homewares, cushions and upholstery.
Dimension: 138cm (W) x 1M
Click to view product
A large, timeless classic. Can be installed horizontally or vertically. See lifestyle application image of coving C332 here or here (with additional panel moulding). Match with C217, C334 coving, P8020 or P8040 dado rail and SX118, SX156 skirting board.
Use Quick Links to the Accessories Menu to order adhesives.
Dimension: 2m (L) x 230mm (H) x 115mm (P) OR 115mm (H) x 230mm (P)
Dimension: 138cm (W) x 1M
Click to view product
A high skirting board (20cm) for older style properties. Primed ready to paint. Great for hiding cables etc behind (max 7mm). Match with P8050 and P8040 dado rail, plus C990, C336, C332 coving and R40 ceiling rose.
Dimension: Height 20cm, projection 1.6cm, length 2m
Dimension: 138cm (W) x 1M
Click to view product
Ionic Column capital - to fit K1002 or K1102 shaft. Dims: 350mm square, Height: 125mm. Our external range of products are manufactured and designed to be maintenance free for decades to come.
As they can be more complicated to order please call us to discuss any installation issues or questions you may have on 02 9700 7222. Due to the nature of these products, additional carriage charges will apply. Available on Special Order
KP1 Pilaster (combination K250/251/254 -see individual parts below for full specification and application image).
Dimension: Max height 2885mm
KP4 Pilaster (combination K240/241/254 - see individual parts below for full specification)
Dimension: Max height 2695mm
KP7 Pilaster (combination K220/224/255 - see individual parts below for full specification)
Dimension: Max height 2710mm
Pilaster capital K241 (fits with shaft K240).
Dimension: Height 165mm; width 400mm, projection 75mm
KP3 Pilaster (combination K200/201/202 - see individual parts below for full specification)
Dimension: Max height 2690mm
KP5 Pilaster (combination K220/221/255 - see individual parts below for full specification)
Dimension: Max height 2760mm
KP6 Pilaster (combination K220/223/255 - see individual parts below for full specification and application image)
Dimension: Max height 2765mm
Another of our bestsellers - Orac Decor C333 - a timeless "swan-neck" design. (Min radius for flexible version 3.3m). See example of coving application image here. And another example (showing as curtain pelmet here). Match with C217, C213 coving, P8020 or P8030 dado rail and SX118, SX156 skirting board.
Use Quick Links to the Accessories Menu to order adhesives.
Available on Special Order
Dimension: 2m (L) x 120mm (H) x 110mm (P)
Larger "swan neck" cornice. Orac Decor coving C334 (min radius for flexible version 3.8m). See life application image of Profile here. Match with C217, C322 coving, P8020 or P8040 dado rail and SX118, SX156 skirting board.
Use Quick Links to the Accessories Menu to order adhesives.
Available on Special Order
Dimension: 2m (L) x 150mm (H) x 195mm (P)
Very large swan neck cornice, similar to C333 and C334. Also matches with C17, C990 coving, P9900 or P9901 dado rail and SX118, SX156 skirting board.
Use Quick Links to the Accessories Menu to order adhesives.
Dimension: 2m (L) x 215mm (H) x 200mm (P)
Very large swan neck cornice, similar to C333 and C334. Also matches with C17, C990 coving, P9900 or P9901 dado rail and SX118, SX156 skirting board.
Use Quick Links to the Accessories Menu to order adhesives.
Available on Special Order
Dimension: 2m (L) x 215mm (H) x 200mm (P)
Raised panel. Accentuates a flat door, or plain wall area underneath a dado / chair rail. Match with D500, D503, D506 and D507 raised panels and F30, F31 ceiling/wall tiles.
Dimension: 55 x 22 x 1.5cm
Match with D300 architrave foot and the Byblos Arch Facia System. Flexible option available.
Dimension: 2m (L) x 90mm (H) x 30mm (P)
Combines superbly with cornice C990 to create unique and individual designs. Match with C305 cornice and SX104 skirting board. Also available in flexible material.
Available on Special Order
Dimension: 2m (L) x 80mm (H) x 10mm (P)
Very large C-section profile - 160 x 215mm. Combine with P9900 panel mould to create intricate detailing.
Use Quick Links to the Accessories Menu to order adhesives.
Available on Special Order
Dimension: 2m (L) x 215mm (H) x 160mm (P)
Rigid or flexible version of our most popular skirting (SX118 as above) - solves all those curved wall problems! Min radius 0.4m. Available in 2m lengths.
Dimension: Height 14cm, projection 1.8cm, length 2m
Orac Decor coving/cornice lighting trough - install 15-20 cm from ceiling for full room surround lighting effect. "Mouse over" picture for profile dimensions (cm's).
Use Quick Links to the Accessories Menu to order adhesives.
See here for technical details and installation instructions
Indirect Lighting Brochure
Available on Special Order
Dimension: L: 2m x H: 7.5cm x W: 17cm
Xinnix recessed fixture for energy saving light (not incl)
Available on Special Order
Dimension: 19.5 x 34 x 8.5cm
Contemporary modern cornice styling - click thumbnail for further info and example roomset images. Made with recessed 'shadow line' at back of cornice which gives a wonderful 'floating' illusion. Match with P5051 dado rail and SX104 skirting board or contemporary stacked cornices.
Use Quick Links to the Accessories Menu to order adhesives.
Dimension: 2m (length) x 3cm (max thickness) x 16.5cm (projection)
Very large C-section profile - 160 x 215mm. Combine with P9900 panel mould to create intricate detailing.
Use Quick Links to the Accessories Menu to order adhesives.
Available on Special Order
Dimension: 2m (L) x 215mm (H) x 160mm (P)
Indirect uplighting cornice ref C358 - mouse-over image for cornice dimensions (cm's). For lights, see below.
Use Quick Links to the Accessories Menu to order adhesives.
See here for technical details and installation instructions
Indirect Lighting Brochure
Dimension: L: 2m x H: 7.5cm x W: 14cm
Cornice lighting trough ref C357 - mouse-over cornice image for product dimensions (cm's), and see light fitting options below.
Use Quick Links to the Accessories Menu to order adhesives.
See here for technical details and installation instructions
Indirect Lighting Brochure
L: 200cm x H: 7.5 x W: 11cm
Dimension: L: 200cm x H: 7.5 x W: 11cm
This rail is very slim (only 17 mm high and 12 mm wide), strong and innovative art hanging system that can be integrated into any home, office, gallery or public space with ease.
The R10 Rail can be mounted directly against the ceiling and due to the design of the rail the Twister drop (clear perlon, steel wire or solid rod) can be inserted at any point along the rail and is completely hidden from view.
Mounted to the wall using the Newly Wall Clip the R10 Rail is extremely stable due to the high position of the hanging point. The design of the rail enables the Newly Wall Clip to be positioned far enough from the ceiling to allow for easy drill access.
The R10 Rail comes with a drilling template to ensure correct positioning of the Newly Wall Clip.
The white R10 Rail option allows you to paint the rail the same colour as the wall making the R10 Rail hanging system virtually invisiable.
The R10 Rail solution has a maximum load weight to 20 kg per metre when correctly fitted to a wall using Newly Wall Clip's positioned every 30 cm.
Please email us for pricing for connectors, droppers and hooks.
 |
1101.201 Rail White 200cm /300cm |
 |
2101.100 End Cap White |
 |
2101.200 Corner Connector White |
 |
1102.201
Rail Silver 200cm / 300cm |
 |
2102.100 End Cap Silver |
|
2102.200 Corner Connector Silver |
 |
3010.102 Wall Clip |
 |
4010.100 Wall Clip Screw |
 |
4020.100 Wall Rail Screw Plug |
 |
4040.200 Wall Rail Installation Set 200cm |
Dimension: L: 200cm x H: 17mm x W: 1.2cm
Click to view product
Orac Decor coving C217 - Our most popular cornice profile - can be installed horizontally or vertically. (Flexible version min radius 3.4m). See example of application here. Matches with C213, C333 coving, P8020 or P8030 dado rail and SX118, SX156 skirting board.
Use Quick Links to the Accessories Menu to order adhesives.
Available on Special Order
Seen here, Hype Workshop's stand build at the 2011 Melbourne Cup for French champagne label GH Mumm
Hype Workshop
Dimension: 2m (L) x 155mm (H) x 105mm (P) OR 105mm (H) x 155mm (P)
Printed fabric width is 138 cm (54.3"). Fabric width = 150 cm (59 inches).Weight = 265 gsm, ideal for soft furnishings, upholstery and craft projects.
Size of largest flower is 7.5 cm or 3 inches wide. Vertical repeat is 26 cm (10 1/4") and horizontal repeat is 27 cm (10 5/8").
Dry or steam-clean or gentle-machine wash.
Dimension: 138cm (W) x 1M
Click to view product
Dimension: 138cm (W) x 1M
Click to view product
Dimension: 138cm (W) x 1M
Click to view product
Click to view product
- Printed fabric width is 140 cm (55").
- Fabric width = 150 cm (59 inches).Weight = 265 gsm, ideal for curtains, soft furnishings, homewares and craft projects.
Dimension: 140cm (W) x 1M
Click to view product
- Printed fabric width is 140 cm (55").
- Fabric width = 150 cm (59 inches).Weight = 265 gsm, ideal for curtains, soft furnishings, homewares and craft projects.
Dimension: 140cm (W) x 1M
Click to view product
- Printed fabric width is 140 cm (55").
- Fabric width = 150 cm (59 inches).Weight = 265 gsm, ideal for curtains, soft furnishings, homewares and craft projects.
Dimension: 140cm (W) x 1M
Click to view product
Printed stripes run horizontally from selvedge to selvedge.
Dimension: 140cm (W) x 1M
Click to view product
Dimension: 140cm (W) x 1M
Click to view product
Printed stripes run horizontally from selvedge to selvedge.
Dimension: 140cm (W) x 1M
Click to view product
Printed stripes run horizontally from selvedge to selvedge.
Dimension: 140cm (W) x 1M
Click to view product
Printed stripes run horizontally from selvedge to selvedge.
Dimension: 140cm (W) x 1M
Click to view product
Choose from Red, Cottage Blue or Crème print.
Dimension: 45 x 45 cm
Click to view product
Dimension: 45 x 45 cm
Click to view product
Dimension: 45 x 45 cm
Click to view product
The French Stripes napkins are inspired by a love for French style. Stripes are a hand-cut design.
Sold as Set of 4 and gift-wrapped with cotton Baker's Twine.
Linen is a beautiful natural fibre known for its great absorption qualities. Each napkin measures 34 x 34 cm (13.3 square inches).
Napkins are made in Eastern Europe and hand-printed in Australia using water-based, solvent free inks.
Machine washable. Expect some shrinkage after first wash.
Dimension: 34 x 34 cm
Click to view product
Choose from Red, Cottage Blue or Crème print.
Dimension: 45 x 45 cm
Click to view product
.
Dimension: 34 x 34 cm
Click to view product
.
Machine washable. Expect some shrinkage after initial wash.
Click to view product
Each napkin measures 45 x 45 cm (17.7 square inches).
Machine washable. Expect some shrinkage after first wash.
Dimension: 45 x 45 cm
Click to view product
Dimension: 24mm diametre
Click to view product
Dimension: 22 x 22 mm
Click to view product
Dimension: 34 x 34 cm
Click to view product
Dimension: 34 x 34 cm
Click to view product
Our original Butterfly design is hand-printed with water-based, toxic-free inks on 100% natural, European linen.
Dimension: 50 x 33cm
Click to view product
Set your table in style!
Our original Hydrangeas design is hand-printed with water-based, toxic-free inks on 100% natural, European linen.
Each placemat measures approx. 50 x 33 cm (19.5 x 13 inches).
Linen is a natural fibre and will shrink slightly with initial wash. Hand or gentle machine wash.
Choose from Crème, Red or Cottage Blue print in drop-down menu below. Sold as set of 2.
Dimension: 50 x 33cm
Click to view product
Dimension: 50 x 33cm
Click to view product
Dimension: 50 x 33cm
Click to view product
Dimension: 50 x 33 cm
Click to view product
Dimension: 50 x 33cm
Click to view product
Dimension: 50 x 33cm
Click to view product
Gentle machine wash or dry clean. Fabric is pre-washed and pre-shrunk.
Dimension: 180 x 42 cm
Click to view product
Our original 'Cottage Garden' design is hand-printed with water-based, toxic-free inks on 100% natural, European linen.
Table runners measure approx. 180 x 42 cm (70.5" x 16.5") or shorter size is 140 x 42 cm (55.25" x 16.5 "). May be be custom-made to any size. Please contact us for a quote.
Choose from Crème, Cottage Blue or Red prints in drop-down menu. NOTE: Please allow up to 3 weeks delivery if this item is not in stock. We will notify you if this is the case.
Dimension: 180 x 42cm (long) or 140 x 42cm (short)
Click to view product
Choose from Black Print on White, Red Print on Natural or Crème print on Natural or Duckegg Blue Linens
Dimension: 180 x 42cm (long) or 140 x 42cm (short)
Click to view product
Hydrangea design is hand-printed with water-based, toxic-free inks on 100% natural, European linen.
Table runners measure approx. 180 x 42 cm (70.5" x 16.5") or shorter size is 140 x 42 cm (55.25" x 16.5 "). May be be custom-made to any size. Please contact us for a quote.
Choose from Crème, Cottage Blue or Red prints.
NOTE: Please allow up to 3 weeks delivery if this item is not in stock. We will notify you if this is the case.
Dimension: 180 x 42cm (long) or 140 x 42cm (short)
Click to view product
.jpg){kind=link}
.jpg){kind=link}
.jpg){kind=link}
.jpg){kind=link}
.jpg){kind=link}
.jpg){kind=link}
.jpg){kind=link}
.jpg){kind=link}
.jpg){kind=link}
.jpg){kind=link}
.gif){kind=link}
.jpg){kind=link}
.jpg){kind=link}
.jpg){kind=link}
.jpg){kind=link}
.jpg){kind=link}
.jpg){kind=link}
.jpg){kind=link}
.jpg){kind=link}
.jpg){kind=link}
.jpg){kind=link}
.jpg){kind=link}
.jpg){kind=link}
.jpg){kind=link}
NOTE: Please allow up to 3 weeks delivery if this item is not in stock. We will notify you if this is the case.
Dimension: 180 x 42cm (long) or 140 x 42cm (short)
Click to view product