Purotouch Dado Profiles
Like Us on our Facebook Gallery
- available in 2m or 2.44m sections (certain profiles only in 2.44)
- all measurements are METRIC
- some profiles can be supplied in FLEXIBLE material to fit curved walls or arches.
- use Decofix Pro adhesive (from our Accessories - Adhesives section) to install
- made in impact resistant resin, pre-primed for painting
- the Axxent range is 100% recyclable
- interstate and regional NSW: please call 02 9700 7222 to collect your order from our warehouse at Unit 28 / 34-36 Ralph Street, Alexandria, NSW 2015
 |
Green Production As the world leader in high quality architectural mouldings Orac has invested substantially to reduce their carbon footprint. Solar energy provides a large part of the energy needed to produce the products. All Duropolymer products are 100% recyclable. None of the products contain toxic gases and all of the products are produced without CFC's. Waste material is returned to a granular form and used to produce new products. |
"Good delivery service and exceptional good customer service and helpfulness when I telephoned them for advice. Would certainly use them again" (21st Oct '08)
Matching corner element for P2020 and P21 (below)
Dimension: 200mm(L) x200mm(H) x25mm(P)
Decorative element (match with P101/A)
Special delivery.
Dimension: 65mm(L) x65mm (H) x10mm (P)
Decorative element (match with P201/A)
Not currently in stock. Non-stock orders allow 15 days delivery, airfreight will incur additional costs, please call to arrange a no obligation quote 02 9660 2177 or arrange a special delivery.
Dimension: 65mm(L) x65mm (H) x10mm (P)
Matching corner element for dado P1020 and P20 (below)
Dimension: 250mm(L) x250mm(H) x25mm(P)
Match with decorative element P20, P101/A decorative corner elements add C201 coving and R74 ceiling rose.
(also available in flexible material)
Dimension: 2m (L) x 50mm (H) x 25mm (P)
Match with decorative element P21 and SX118, SX156 skirting board. Also available in flexible material.
Dimension: 2m (L) x 45mm (H) x 25mm (P)
.jpg)
P3070 PDF
Dimension: Dimensions: 200 x 12.5 x 3.2cm
This design with its double expanding wave is by Ulf Moritz. Combine it horizontally one above the other or vertically alongside each other for an extraordinary silhouette.
PDF 3071
Dimension: L 200 x H 37.2 x W 7.6 cm
See below for matching corner element P4020A. Match with PX120 dado rail, C213, C217 coving and SX122 skirting board.
Available in flexible material, ideal for ceiling / wall borders.
Dimension: 2m (L) x 50mm (H) x 30mm (P)
Matching corner element for dado P4020 (above)
Special delivery.
Dimension: 165mm(L) x70mm(H) x30mm (P)
Our fragmented panel moulding P4025 is unique in its design and fits our other Autoire profiles (W120, W121, C324). It is therefore perfectly fit to create your own custom made framework when already using our ready-made wall panels from the same collection (W120, W121).
.png)
Dimension: L 200 x H 8.3 x W 3.4 cm
Match with corner blocks P5020/A and P5020/B below, also matches with C402 coving.
Also available in flexible material.
Dimension: 2m (L) x 90mm (H) x 15mm (P)
Matching corner element for P5020 (above)
Not currently in stock. Non-stock orders allow 15 days delivery, airfreight will incur additional costs, please call to arrange a no obligation quote 02 9660 2177 or arrange a special delivery.
Dimension: 90mm x 90mm x 15mm
Match with P5050, dado rail C352, C353, C354, C356 coving and SX155 skirting board. Also available in flexible material.
Dimension: 2m (L) x 30mm (H) x 10mm (P)
Can also be installed "upside down" Match with P5051 dado rail, C351 coving and SX118, SX156 skirting board.
Dimension: 2m (L) x 20mm (H) x 15mm (P)
Can also be installed "upside down". Match with C356 coving, C352 Uplighting cornice, P5050 dado rail and SX105 skirting board.
Dimension: 2m (L) x 85mm (H) x 15mm (P)
Complements our dentil cornice C211 and C422 and also covings CX107 and CX129. Also match with P7040 dado rail, R24 ceiling rose and SX118, SX156 skirting board. Also available in flexible material.
Dimension: 2m (L) x 65mm (H) x 30mm (P)
Match with P7020 dado rail, C218 coving, R37 ceiling rose. Also available in flexible material.
Special Order. Special orders allow 15 days delivery, airfreight will incur additional costs, please call to arrange a no obligation quote 02 9700 7222.
Dimension: 2m (L) x 105mm (H) x 20mm (P)
Match with C303 coving, R37 ceiling rose, P7010 dado rail and SX118 skirting board. Also available in flexible material.
Special Order. Special orders allow 15 days delivery, airfreight will incur additional costs, please call to arrange a no obligation quote 02 9700 7222.
Dimension: 2m (L) x 110mm (H) x 20mm (P)
Match with C304 coving, R28 ceiling rose and SX118, SX155 skirting board. Also available in flexible material.
Special Order. Special orders allow 15 days delivery, airfreight will incur additional costs, please call to arrange a no obligation quote 02 9700 7222.
Dimension: 2m (L) x 80mm (H) x 25mm (P)
Match with C218, D161 pediment and R64 ceiling rose.
Special Order. Special orders allow 15 days delivery, airfreight will incur additional costs, please call to arrange a no obligation quote 02 9700 7222.
Dimension: 2m (L) x 220mm (H) x 20mm (P)
Click to view product
Matching corner element for dado P8020 (above)
Special Order. Special orders allow 15 days delivery, airfreight will incur additional costs, please call to arrange a no obligation quote 02 9700 7222.
Dimension: 200mm(L) x85mm(H) x25mm (P)
See below for matching corner profile elements Match with P8030/C , P8030/D dado rail, C213, C217 and SX118 skirting board.
Corner element P8030 C/D
Dimension: 2m (L) x 40mm (H) x 15mm (P)
Click to view product
Matching corner element for dado P8030 above. Match with P8030 and P8020 panel mouldings and skirting SX118 / SX156. Cornice C217.
Special Order. Special orders allow 15 days delivery, airfreight will incur additional costs, please call to arrange a no obligation quote 02 9700 7222.
Dimension: 190mm(L) x55mm(H) x15mm (P)
Matching corner element for dado P8030 (above).
Dimension: 130mm(L) x130mm(H) x15mm (P)
Match with D300 architrave foot and the Byblos Arch Facia System. Flexible option available.
Dimension: 2m (L) x 90mm (H) x 30mm (P)
